DOI QR코드

DOI QR Code

Effect of Compression Ratio on the Combustion Characteristics of a Thermodynamics-Based Homogeneous Charge Compression Ignition Engine

  • Han, Sung Bin (Department of Mechanical & Automotive Engineering, Induk University)
  • Received : 2015.07.20
  • Accepted : 2015.09.19
  • Published : 2015.09.30

Abstract

Homogeneous charge compression ignition (HCCI) engine combines the combustion characteristics of a compression ignition engine and a spark ignition engine. HCCI engines take advantage of the high compression ratio and heat release rate and thus exhibit high efficiency found in compression ignition engines. In modern research, simulation has be come a powerful tool as it saves time and also economical when compared to experimental study. Engine simulation has been developed to predict the performance of a homogeneous charge compression ignition engine. The effects of compression ratio, cylinder pressure, rate of pressure rise, flame temperature, rate of heat release, and mass fraction burned were simulated. The simulation and analysis show several meaningful results. The objective of the present study is to develop a combustion characteristics model for a homogeneous charge compression ignition engine running with isooctane as a fuel and effect of compression ratio.

Keywords

References

  1. Campbell, S., Lin, S., Jansons, M. and Rhee, K. T, In-cylinder liquid fuel layers, cause of unburned hydrocarbon and deposit formation in SI engines. SAE Paper No. 1999-01-3579, 1999.
  2. Christensen, M. and Johansson, B., Homogeneous charge compression ignition with water injection, SAE Paper No. 1999-01-0182, 1999.
  3. Choi, G. H., Han, S. B. and Dibble, R. W., Experimental study on homogeneous charge compression ignition engine operation with exhaust gas recirculation, Int. J. Automotive Technology Vol.4, No.3, 195-200, 2004.
  4. Han, S. B., Experimental study on liquefied petroleum gas fueled homogeneous charge compression ignition engine, Int. J. Automotive Technology Vol.14, No.6, 837-842, 2013. https://doi.org/10.1007/s12239-013-0092-1
  5. Au, M. Y., Girard, J. W., Dibble, R., Flowers, D., Aceves, S. M., Frias, J. M., Smith, R., Seibel, C. and Maas, U., 1.9-liter four-cylinder HCCI engine operation with exhaust gas recirculation. SAE Paper No. 2001-01-1894, 2001.
  6. Kramer, F., Schwarz, C. and Witt, A., Effect of compression ratio on the combustion of a pressure charged gasoline direct injection engine, SAE Paper No. 2000-01-0250, 2000.
  7. Sakthinathan, G. P. and Jeyachandran, K., Theoretical and experimental validation of hydrogen fueled spark ignition engine, Thermal Science, Vol.14, No.4, pp.989-1000, 2010. https://doi.org/10.2298/TSCI1004989S
  8. Heywood, J. B., Internal Combustion Engine Fundamentals, Mc-Graw Hill, 1987.
  9. Goodwin, A. R., Sengers, J. V., Peters, C. J., Applied Thermodynamics of Fluids, RSC Publishing, 2010.
  10. Ma, J., Su, Y., Zhou, Y. and Zhang, Z., Simulation and prediction on the performance of a vehicle's hydrogen engine, International Journal of Hydrogen Energy, Vol.28, pp.77-83, 2003. https://doi.org/10.1016/S0360-3199(02)00046-0
  11. Thompson, I. G., Spence, S. W., Thornhill, D., McCartan, C. D. and Talbot-Weiss, J. M., The technical merits of turbogenerating shown through the design, validation and implementation of a one-dimensional engine model, International of Engine Research, Vol.15, No.1, pp.66-77, 2014. https://doi.org/10.1177/1468087412458383