• 동력기계공학회지
• /
• 제22권1호
• /
• pp.11-17
• /
• 2018

The steady-state, incompressible and three-dimensional numerical analysis was carried out to evaluate the internal flow fields characteristics of wind tunnel contractions made by Morel's curve equations. The turbulence model used in this study is a realizable ${\kappa}-{\varepsilon}$ well known to be excellent for predicting the performance of the flow separation and recirculation flow as well as the boundary layer with rotation and strong back pressure gradient. As a results, when the flow passes through the interior space of the analytical models, the flow resistance at the inlet of the plenum chamber is the largest at $Z_m=300$, 400 mm, but the smallest at $Z_m=700mm$. The maximum turbulence intensity in the test section is about 2.5% when calculated by the homogeneous flow, so it is improved by about 75% compared to the 10% turbulence intensity at the inlet of the plenum chamber due to the contraction.

• Corrosion Science and Technology
• /
• 제7권1호
• /
• pp.6-12
• /
• 2008

Non-metallic composite overwrap repair methods utilize resin based fiber-reinforced composite materials, which have higher specific strength to weight ratio and stiffness, superior corrosion and fatigue resistance, and substantially reduced weight when compared to carbon steel. Non-metallic repair methods/systems can allow desired functional properties to be achieved at a respectable economic advantage. For example, non-metallic composite repair systems have at least a 50 year design stress of 20 ksi and approximately 25% of the short term tensile strength of fiberglass. For these systems, the contribution of the repaired steel to the load carrying capability need not be considered, as the strength of the repair itself is sufficient to carry the internal pressure. Worldwide experience in the Oil & Gas industry confirms the integrity, durability, inherent permanency, and cost-effectiveness of non-metallic composite repair or rehabilitation systems. A case study of a recent application of a composite repair system in Saudi Aramco resulted in savings of 37% for offshore subsea line and 75% for onshore above grade pipeline job. Maintaining a pipeline can be costly but it is very small in comparison to the cost of a failure. Pipeline proponents must balance maintenance costs with pipeline integrity. The purpose is not just to save money but also to attain a level of safety that is acceptable. This technology involves the use of an epoxy polymer resin based, fiber-reinforced composite sleeve system for rehabilitation and /or repair pipelines.

• 한국분말재료학회지
• /
• 제25권5호
• /
• pp.402-407
• /
• 2018

Molybdenum silicide has gained interest for high temperature structural applications. However, poor fracture toughness at room temperatures and low creep resistance at elevated temperatures have hindered its practical applications. This study uses a novel powder metallurgical approach applied to uniformly mixed molybdenum silicide-based composites with silicon carbide. The degree of powder mixing with different ball milling time is also demonstrated by Voronoi diagrams. Core-shell composite powder with Mo nanoparticles as the shell and ${\beta}-SiC$ as the core is prepared via chemical vapor transport. Using this prepared core-shell composite powder, the molybdenum silicide-based composites with uniformly dispersed ${\beta}-SiC$ are fabricated using pressureless sintering. The relative density of the specimens sintered at $1500^{\circ}C$ for 10 h is 97.1%, which is similar to pressure sintering owing to improved sinterability using Mo nanoparticles.

• 설비공학논문집
• /
• 제26권4호
• /
• pp.163-168
• /
• 2014

The plate heat exchanger has been widely used in water heating systems due to high efficiency, simple structure, and easy maintenance. However, the studies on the effects of fouling on the heat transfer performance under various operation and maintenance conditions are very limited in the open literature. The objective of this study is to investigate the effects of fouling with calcium carbonate ($CaCO_3$) on the heat transfer characteristics of the plate heat exchanger under various operating and geometric conditions. The heat transfer coefficient and pressure drop in the plate heat exchangers were measured under accelerated fouling conditions with $CaCO_3$ by varying geometric and operational parameters. The fouling resistance increased with the decrease in the flow rate, and the increase in the chevron angle and the concentration.

• 접착 및 계면
• /
• 제9권4호
• /
• pp.12-16
• /
• 2008

핫멜트 접착제는 상온에서 고체상태로 존재하나 열에 의하여 활성화되어 지압 정도의 압력으로 접착이 가능하다. 또한 접착속도가 빠르고 공정의 자동화가 가능하며 친환경적인 장점을 가지고 있다. 본 연구에서는 SBS와 석유수지의 종류 및 이들의 조성비가 핫멜트 접착제의 물성에 미치는 영향을 알아보았다. 핫멜트 접착제의 스타이렌 함량 및 $C_9$계 석유수지의 함량이 증가함에 따라 점도, 인장강도, 접착력 및 내열성 등이 증가하는 경향을 나타내었다.

• International Journal of Advanced Culture Technology
• /
• 제3권2호
• /
• pp.110-117
• /
• 2015

10 wt% (Ni-Co) catalysts with different Ni and Co content : 10%Ni, 9%Ni1%Co, 7%Ni3%Co, 5%Ni5%Co, 3%Ni7%Co, and 10%Co; were prepared using sol-gel method followed by incipient wetness impregnation method. To investigate the catalytic activity including the stability, dry methane reforming were demonstrated over the pelletized catalysts at $620^{\circ}C$ under atmospheric pressure in a $CH_4:CO_2:N_2$ feedstock for 360 min. The results showed that bimetallic catalysts with the Co content equal to or greater than 3% were more stable than monometallic catalysts (10%Ni and 10%Co). The temperature programmed hydrogenation interpreted that the additional of Co into Ni catalyst improved the carbon resistance from methane cracking. Promoted this type of bimetallic catalyst using 1wt% K (trimetallic catalyst) prevented the carbon formation on the catalyst. The temperature programmed desorption of $CO_2$ indicated that this trimetallic catalyst has a greater number of strong basic sites. Moreover, the appearance of K lowered the number of weak basic sites and decreased the conversion of methane by 12 %.

• Journal of Acupuncture Research
• /
• 제18권2호
• /
• pp.214-226
• /
• 2001

Background and Purpose : Recently oriental medicine is making a new try for arthritis therapy, one of them is herbal acupuncture. Herbal acupuncture is therapy which combines acupuncture with herbal medicine. Also, aquatherapy will be the good method for arthritis therapy. Aquatherapy begins with YMCA aquatic exercise program in 1984 by America athritis foundation. Aquatherapy uses buoyancy, hydmstatic pressure, resistance, water temperature which is four water characters. So we should study on the herbal acpuncture and aquatherapy. Objecitve and Method : This study researched 21 thesises for herbal acupuncture and many artcles and data for aquatherapy. 21 thesises for herbal acpuncture is divided two groups. One group is about effect on alleviation of pain(18 thesises), the other group is for antiphlogistic effect(13 thesises). About aquatherapy, we research many books, papers, and aquatherpy method, for example Ai Chi, BACKHAB, Watsu. Result and Conclusions : About herbal acupuncture, we researched 21 thesises, and 17 thesises proved the effect on alleviation of pain, 13 thesises proved the antiphlogistic effect of herbal acupuncture. For the aquatherapy, we researched many datas, and concluded like this. Due to the lessned effect of gravity, patients in exercising in water will have very little body weight and very little impact. So, aquatherapy or aquaexercise is an excellent exercise medium for the people who are experiencing some physical difficulty.

• 한국해양공학회지
• /
• 제13권2호통권32호
• /
• pp.90-98
• /
• 1999

Boiler high-temperature pipelines such as main steam pipe, header and steam drum in fossil power plants are degraded by creep damage due to severe operationg conditions like high temperature and high pressure for an extended period time. Such material degradation lead to various component faliures causing serious accidents at the plant. Conventional measurement techniques such as replica method, electric resistance method, and hardness test method have such disadvantages as complex preparation and measurement procedures, too many control parameters, and therefore, low practicality and they were applied only to component surfaces with good accessibility. In this study, both artificial creep degradation test using life prediction formula and frequency analysis by ultrasonic tests for their preparing creep degraded specimens have been carried out for the purpose of nondestructive evaluation for creep damage which can occur in high-temperature pipelline of fossil power plant. As a result of ultrasonic tests for crept specimens, we confirmed that the high frequency side spectra decrease and central frequency components shift to low frequency bans, and bandwiths decrease as increasing creep damage in backwall echoes.

• 한국해양공학회지
• /
• 제13권2호통권32호
• /
• pp.99-107
• /
• 1999

Boiler high-temperature pipelines such as main steam pipe, header and steam drum in fossil power plants are degraded by creep damage due to severe operationg conditions which are high temperature and high pressure for an extended period time. Such material degradation leads to various component failures causing serious accidents at the plants. Conventional measurement techniques such as replica method, electric resistance method, and hardness test method have such disadvantages as complex preparation and measurement procedures, too many control parameters, and therefore, low practicality and they were applied only to component surfaces with good accessibility. In this paper, artificial creep degradation test and ultrasonic measurement for their creep degraded specimens have been carried out for the purpose of evaluation for creep damage which can occur in high-temperature pipeline of fossil power plant. Absolute measuring method of quantitative ultrasonic measurement for material degradation was established, and long term creep degradationtests using life prediction formula were carried out. As a result of ultrasonic tests for crept specimens, we confirmed that the sound velocity decreased and the attenuation coefficient linearly increased in proportion to the increase of creep fractiin(${\phi}$c).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.1105-1108
• /
• 2008

본 고에서는 화재 시 구조물 콘크리트의 안전성 확보를 목적으로, 폭렬방지대책 및 메커니즘에 대해 고찰 분석한 것으로서, 그 결과를 요약하면 다음과 같다. 1) 국내 외에 알려져 있는 고성능 콘크리트의 폭렬방지 방법으로 함수율 및 C/W를 낮추는 방법,내화피복을 실시하여 고온을 차단하는 방법, 횡구속 실시하여 내부에서 발생되는 횡변위에 저항하는 방법, 섬유를 혼입하여 수증기압을 외부로 배출시키는 방법 등 4가지 방안이 있다. 2) 기존의 폭렬관련 이론과 WPB이론에 의한 폭렬메커니즘 분석을 토대로 폭렬방지 방안을 제안하면 기존 건축물에 한해서는 내화피복을 실시하는 방법이, 신축 건축물에 한해서는 섬유를 혼입하는 방법이 양호한 것으로 판단된다.