• Aerospace Engineering and Technology
• /
• v.8 no.1
• /
• pp.207-214
• /
• 2009

The purpose of this study was to examine the influence of hypoxic exercise at head down tilt (HDT) on cardiovascular responses. Eight men ($23{\pm}2$ yrs, $176{\pm}4$ cm, and $75{\pm}8$ kg) underwent four separate exercise testing sessions; seated normoxia (SN), seated hypoxia (SH), HDT normoxia (HN), and HDT hypoxia (HH). Each participant performed the leg cycling at predetermined 40% of maximal aerobic capacity relevant to each posture for 15 min. Heart rate was higher in SH than SN and higher also in HH than SH (p<0.05). Blood oxygen saturation was lower in SH than SN (p<0.05). During resting, diastolic blood pressure and mean arterial pressure was significantly lower in HDT than seated posture (p<0.05). No differences were found between conditions in hemoglobin and hematocrit and electrolytes including, sodium, potassium, and chloride. Lactate was higher in SH than SN. In conclusion, there was no effect for cardiovascular responses to duplicate stimuli both hypoxia and posture.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.4
• /
• pp.89-95
• /
• 2017

The improvement of a flow coefficient for the recirculation chill-down flow in a main oxidizer shut-off valve has been presented. The flow coefficient, which is mainly affected by the recirculation outlet port size and the configuration inside the valve, has been predicted with measured flow coefficient values. The comparison of experimentally measured flow coefficient with the predicted value shows the effect of valve inside configuration on the flow coefficient. Consequently, the flow coefficient is twice the previous value and about 75% of the pressure loss assigned to the main oxidizer shut-off valve can be used for additional pressure losses for other components in the recirculation chill-down system of a launch vehicle.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.10 no.3
• /
• pp.129-137
• /
• 2002

In this study, evaporation pressure drop experiments were conducted with two types of plate and shell heat exchangers (P&SHE) using R-22. An experimental refrigerant loop has been established to measure the evaporation pressure drop of R-22 in a vertical P&SHE. The flow channels were formed by stacking three plates having a corrugated channel of a chevron angle of 45 dog. The R-22 flows down in one channel exchanging heat with the hot water flowing up in the other channel. The effect of the refrigerant mass flux, average heat flux, system pressure and vapor quality were explored in detail. During the experiment, the quality change between the inlet and outlet of the refrigerant channel ranges from 0.03 to 0.15. The present data showed that two types of P&SHE have similar trends. The pressure drop in-creases with the vapor quality for both types of P&SHE. At a higher mass flux, the Pressure drop is higher for the entire range of the vapor quality. Also, the increase in the average heat flux increases the pressure drop. Finally, at a higher system pressure, the pressure drop is found to be slightly lower compared to the lower system pressure.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.6
• /
• pp.1220-1227
• /
• 2001

The condensation pressure drop fur refrigerant R-22 flowing in the plate and shell heat exchanger were investigated experimentally in this study. Two vertical counterflow channels were formed in the exchanger by three plates of commercial geometry with a corrugated trapezoid shape of a chevron angel of $45^{\circ}$. The condensing R-22 flowing down in one channel exchanges heat with the cold water flowing up in the other channel. The effects of the mean vapor quality, mass flux, average imposed heat flux and system pressure of R-22 on the pressure drop were explored in detail. The quality change of R-22 between the inlet and outlet of the refrigerant channel ranges from 0.03 to 0.05. The present data showed that pressure drop increases with the vapor quality. At a higher mass flux, pressure drop is higher for the entire range of the vapor quality. Also, a rise in the average imposed heat flux causes an slight increase in the Pressure drop. Finally, at a higher system pressure the pressure drop is found to be slightly lower. Correlation is also provided for the measured pressure drops in terms of the friction factor.

• Journal of Families and Better Life
• /
• v.34 no.4
• /
• pp.89-109
• /
• 2016

The purposes of this study were to analyze and understand the life of mothers rearing children with Down syndrome and to present basic data for overcoming the difficulties of those families. For these purposes, this study made use of the phenomenological analysis and approach with a qualitative research method. The subjects of this study are 4 mothers rearing children with Down syndrome who are beyond school age. The results were as follows. First, the reason why mothers with Down syndrome children went through psychological shock and horror was the social stigma due to the unusual appearance of children with Down syndrome. Second, the isolation with in the public education system was disclosed as a factor causing much sorrow and pain. Through this, we can recognize the importance of ensuring the equal right to receive education of children with Down syndrome. Third, the period which the mother experienced most shock and confusion was right after finding out about the disability that her child has. So, we can identify the importance of early intervention providing psychotherapy and rearing service to the parents. Fourth, the crucial factor that relieved pain and pressure from mothers was social support including family. Therefore, the social support system for mothers with Down syndrome children has to be developed and strengthened. Fifth, the crucial factor that made mother grow up during rearing experience was the reestablishment of cognition about the desired role of mothers. Through this, we can identify the importance of the mental transition process to independent thinking.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2977-2982
• /
• 2007

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damage, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle - installed downstream of the high pressure turbine extraction steam line - inside number 5A and 5B feedwater heaters. At that point, the extracted steam from the high pressure turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows in reverse direction after impinging the impingement baffle, the shell wall of the number 5 high pressure feedwater heater may be affected by flow-accelerated corrosion. This paper describes the comparisons between the numerical analysis results using the FLUENT code and the down scale experimental data which effect on disclosing of the shell wall thinning of the high pressure feedwater heaters by porous plate.

• International journal of advanced smart convergence
• /
• v.6 no.4
• /
• pp.1-8
• /
• 2017

In this work, the effects of fairly influential factors on performance of vacuum system, such as constant pressure and outgassing effect were simulated to propose the optimum design factors. Outgassing effects of selected vacuum materials on the vacuum characteristics were simulated by the $VacSim^{Multi}$ simulation tool. This investigation examined the feasibility of reliably simulating the outgassing characteristics of common vacuum chamber materials (aluminum, copper, stainless steel, nickel plated steel, Viton A). The optimum design factors for vacuum systems were suggested based on the simulation results. And, the effects of throttle valve applications on vacuum characteristics were also simulated to obtain the optimum design model of variable conductance on high vacuum system. Simulated vacuum characteristics of the proposed modelling were agreed with the observed experimental behaviour of real systems. Pressure limit valve and normally on-off control valve were schematized as the modelling of throttle valve for the constant process-pressure. Simulation results were plotted as pump-down curve of chamber and variable conductance of throttle valve. Simulated behaviors showed the applications of throttle valve sustained the process-pressure constantly, stably, and reliably.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.2
• /
• pp.71-79
• /
• 2002

In this paper, an oil hydraulic pipeline is terminated by both rotary sinusoidal flow generator at upstream oriffice at down stream. The pulsating pressure wave from generated by the rotary sinusoidal flow generator, is measured by using sensor. In the analysis of this paper, a component of the fundamental frequency is obtained by using Laplace transformation.. The experimental and analytical results make clear that (1) viscosity is significant role in hydraulic pipe. (2) When pulsating frequency is matched with the natural frequency, resonance frequency occured periodically. According to the study proposed here, dynamic pressure in a circular oil pipe is expressed in propagation of pressure wave with respect to frequency and Bessel function. The resonance at oil temperature $20^{\circ}$$0^{\circ}C$ in this study. The abrupt change of gain value is due to effect of resonance frequency. The results of experiment are compared with the calculated results, and agreement of both results is fairly good.

• Journal of Biomedical Engineering Research
• /
• v.5 no.1
• /
• pp.47-54
• /
• 1984

In order to research the flow in the thin wall compliant tube, this present study is attempt to measure the cross sectional area according to change of external pressure and flow by ultrasonic method different from willy used impedance technique for flow analysis about one dimensional Steads flow. The experimental results are as follows. 1) Measurement of cross sectional area ratio by ultrasonic method by comparison with experimental results of impedance technique & theoretical results were well consent. 2) Pressure difference of upstream and down stream is alwap's maximum range at 0.4 < $\alpha$ <0.5, and have no connection with changing external pressure. 3) when the external pressure is fixed and resistance is varied, Self excited oscillation occurs in the region at 0.5 < $\alpha$ <0.6, and oscillation disappear almost at R2>=1.2

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.2
• /
• pp.130-138
• /
• 2006

We have investigated pattern scaling down of silicon stamps through the oxidation technique, During oxidizing the silicon stamps, silicon dioxide that has 300 nm and 500 nm thickness was grown, and critical deformations were not observed in the patterns. There was positive effect to reduce size of patterns because vertical and horizontal patterns have different orientation. We achieved pattern reduction rate of $26\%$. In addition, the formation of polymer patterns had been investigated with varied temperature and pressure conditions to improve the filling characteristics of polymers during nanoimprint lithography when pattern sizes were few micrometers. In these varied conditions, polymers had been affected by free space compensation and elastic stress relaxation for filling the cavities. Based on the results, defect control which is an important issue in the nanoimprint lithography were facilitated.