• Korean Journal of Occupational Health Nursing
• /
• v.24 no.4
• /
• pp.281-289
• /
• 2015

Purpose: This study was conducted to examine the effects of individual counseling for bus-drivers on cerebrovascular and cardiovascular disease prevention. Methods: The one-group pretest-posttest design was used. This study presents a secondary analysis of data collected in 'contents of cerebrovascular and cardiovascular disease prevention program for bus-drivers in one workplace in Seoul, Korea. The data were collected from 56 bus drivers, using questionnaires from September 10th to November 20th, 2014. The analysis was conducted with ${\chi}^2$ test and paired samples t-test using SPSS/Win 21.0. Results: After the intervention, the participants showed a significant decrease in the level of systolic blood pressure (p=.003) and a significant increase in the total cholesterol level (p=.030). The distribution of cardiovascular risk groups changed after the intervention: 5.3% decreased in the high risk group, 16.1% decreased in the medium risk group, and 3.5% decreased in the low risk group, while 25.0% increased in the normal group. Conclusion: The comprehensive individual counseling including simple screening, tailored education and counseling is effective to manage their lifestyle risk factors, resulting in better maintenance of their health as well as preventing cerebrovascular and cardiovascular disease.

• Journal of Ginseng Research
• /
• v.40 no.3
• /
• pp.245-250
• /
• 2016

Background: Ginsenosides are the major effective ingredients responsible for the pharmacological effects of ginseng. Malonyl ginsenosides are natural ginsenosides that contain a malonyl group attached to a glucose unit of the corresponding neutral ginsenosides. Methods: Medium-pressure liquid chromatography and semipreparative high-performance liquid chromatography were used to isolate purified compounds and their structures determined by extensive one-dimensional- and two-dimensional nuclear magnetic resonance (NMR) experiments. Results: A new saponin, namely malonyl-ginsenoside Re, was isolated from the fresh flower buds of Panax ginseng, along with malonyl-ginsenosides Rb1, Rb2, Rc, Rd. Some assignments for previously published $^1H$- and $^{13}C$-NMR spectra were found to be inaccurate. Conclusion: This study reports the complete NMR assignment of malonyl-ginsenoside Re, $Rb_1$, $Rb_2$, Rc, and Rd for the first time.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.2
• /
• pp.132-140
• /
• 2010

The very erosive cavitation is simulated by an inclined propeller dynamometer in the medium-size cavitation tunnel of MOERI. The inclined shaft for propeller makes strong cavitaion, which occurs around the root of a propeller blade. The cavitation begins at the leading edge of the propeller and contracted toward the trailing edge through the reentrant jet action. The cavity focused on the region near the trailing edge collapsed over the blade surface. As the impact pressure by the cavitation collapsing is too strong, it can damage the blade surface in the form of pit. This cavitation impacts created by the collapsing process are similar to the full-scale ones and are different from those by other erosion test methods. The newly developed cavitation erosion test method can be applied to evaluate the materials such as metals, ceramics and coatings in terms of cavitation resistance.

• Journal of Drive and Control
• /
• v.10 no.2
• /
• pp.7-12
• /
• 2013

In this study, a wire/wireless communication system transmitting the operation data of engine from the ER (Engine Room) to the engine controller of ECR(Engine Control Room) has been developed through the communication of ISM(Industrial Science Medical) Band for the test operation environment improvement of medium speed engine. This wire/wireless communication system is composed of the RTU (Remote Terminal Unit) gathering and transmitting engine data as well as the MCU (Master Control Unit) receiving engine status information from the RTU to be sent to the engine controller (PLC). Through this study, a trial product of RTU and MCU has been manufactured. A test bench that has made temperature, pressure and pick-up sensor into a module for the local test of prototype was produced a test bench. In addition, at the same time save the data to a Web server and the smart phone real-time monitoring system has been developed using Wi-Fi communications. The ultimate objective of this study is to develop a wireless smart phone monitoring system of engine for the operator of engine to be able to monitor and control engine status even from the outside of engine room and control room based on this study.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.5
• /
• pp.13-21
• /
• 2014

This study analyzed the differences in the analysis techniques through a comparative analysis of the various segment's modeling techniques of Shield TBM method and proposed reasonable modeling techniques. Also, this study suggested reasonable estimating methods of load to be applicable in the field through the load analysis and three-dimensional finite element analysis by estimating model of rock mass relaxation load. Estimating method of relaxation area by rock mass rating makes no odds of output in subgrade with high rock mass rating, but so the difference of output is large, that is judged to set conservative design off. In estimating result of rock mass relaxation area by three-dimensional analysis relaxation area of subgrade with low-grade soil was predicted to be positioned at medium-range of many methods, in case of designing segment in subgrade with low-grade soil it needs to actively review estimation of relaxation area through three-dimensional analysis reflecting mechanical tunnel excavation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.12
• /
• pp.2199-2201
• /
• 2008

Sulfur hexafluoride($SF_6$) is a gaseous dielectric used in high voltage electrical equipment such as an insultor or arc quenching medium in the transmission and distribution of electricity. however, $SF_6$ is one of the greenhouse gases(GHG) with a global warming potential that is 23,900 times greater than that of carbon dioxide($CO_2$). for this reason, $SF_6$ emissions in electric equipment shall be controlled to reduce GHG and improve cost-effective use of $SF_6$ for economical benefits. Until recently there has not been any investigation on $SF_6$ emission characteristics and inventory in Korea. To understand emission characteristics during the use-phase, the scope of this study was limited to the following closed pressure system equipment from 10 substations in Korea. This study highlights (1) the investigation of sampling/analysis methodology for $SF_6$ emissions in high voltage equipment, (2) the estimation of $SF_6$ emissions in the use-phase, and (3) the comparison between the emission ratio and the mass-balance applied to inventory study. According to this study, the majority of emissions were related to electric equipment nameplates and the rest of the emissions were related to the handling of $SF_6$ during operations. from this result, emission ratios estimated from this study were similar; GIS was 14% and GCB was 13%, as maintenance process conditions were the same as manual process conditions for both equipment.

• Management & Information Systems Review
• /
• v.4
• /
• pp.349-374
• /
• 2000

With rapid advances on Interactive technology, and the growing popularity of the Internet, Internet shopping receives considerable attention in both the popular-press and academic journals. The Internet has enormous commercial possibilities. But it is a new and dynamic medium that poses special challenges for marketers. The revolutionary nature of the Internet mandates that established wisdom on consumer marketing along with marketing-mix strategies has to be reexamined and perhaps radically revised. In order to assist marketers in this endeavor it is critical to understand consumers' buying behaviors of Internet shopping. But research in this area still very much its infancy. This study examined previous researches of Internet shopping and developed conceptual framework of Internet shopping modes. Additionally, this study examined empirical investigation of Internet shopping. Preliminary results suggests that there are significant differences in individuals' perceptions of Internet shopping and traditional shopping modes. Various factors influences on consumers' buying behavior on Internet shopping. There are Individuals' factors(personality, lifestyle, prior experience, perceived risk etc), shopping mall factors(trust, vividness, security, promotion, etc), product characteristics(product category, brand, etc), situational factors(time pressure, locational constraints etc), social/cultural factors(Norms, importance of other peoples etc). Additionally, We conducted empirical study of the impact of the Internet on consumer shopping behavior. We gathered consumers' reactions via an open-ended survey using a sample of 90 shoppers. We related the reactions to the factors of consumers' satisfaction or dissatisfaction of the Internet shopping. Consequently, there are many questions regarding factors that might influence Internet shopping. From theoretical and practical perspectives, studies that examine these factors would seem to offer much to the discipline. This paper has attempted th provide insights and direction of future empirical examination of Internet shopping.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.2
• /
• pp.117-129
• /
• 2015

A parametric array is a nonlinear phenomenon that generates a narrow beam of low-frequency sound using the nonlinearity of the medium. The low-frequency sound so generated has a low sound pressure compared with that of sound generated directly. Consequently, a transducer that can generate a primary wave with high directivity and level is required. This study designed, fabricated, and evaluated a multi-resonance transducer as a parametric array source. The designs of the unit transducers and array transducer were based on an analysis model. The design process was repeated to fabricate the optimum transducer. The fabricated transducer array can generate a 189 dB, 190 dB primary wave level at 6.3 m and a 134 dB difference frequency wave using the parametric array phenomenon. The difference frequency wave has a frequency of 15 kHz and high directivity with an $8^{\circ}$ half power beam width in a $12{\times}18{\times}10m$ water tank.

• Mycobiology
• /
• v.43 no.3
• /
• pp.333-338
• /
• 2015

In a previous study, we identified a Streptomyces sp., A3265, as exhibiting potent antifungal activity against various plant pathogenic fungi, including Botrytis cinerea, Colletotrichum gloeosporioides, and Rhizoctonia solani. This strain also exhibited a biocontrolling effect against ginseng root rot and damping-off disease, common diseases of ginseng and other crops. In this study, we isolated two antifungal substances responsible for this biocontrolling effect via Diaion HP-20 and Sephadex LH-20 column chromatography, medium pressure liquid chromatography, and high-performance liquid chromatography. These compounds were identified as guanidylfungin A and methyl guanidylfungin A by spectroscopic methods. These compounds exhibited potent antimicrobial activity against various plant pathogenic fungi as well as against bacteria.

• Food Science and Biotechnology
• /
• v.16 no.1
• /
• pp.99-103
• /
• 2007

The purpose of this study was to develop a simple detection method, possibly at the species-level, that allows for large-scale screening of bifidobacteria. Human fecal samples were plated on MRS-raffinose agar containing cysteine and neomycin sulfate, serving as selective pressure for bifidobacteria, and 0.003%(w/v) bromocresol green. All of the test strains grew well on this medium at $37{\pm}1^{\circ}C$, forming white colonies surrounded by yellow halos, which presented a sharp contrast against the green background. In this disc assay, the required incubation time to develop a yellowish zone varied with the species of Bifidobacterium that was tested, allowing for differential counts and easy identification at the species-level: 10-14 hr for B. bifidum, 20-22 hr for B. catenulatum and B. infantis. and 24-25 hr for B. longum and B. breve. No apparent color was observed for B. angulatum and B. adolescentis 28 hr after inoculation. To evaluate the results of pH indicator-based identification, individual isolates were subjected to a colony-PCR experiment with genus-specific primers. The amplified products from the isolates were in good accordance with those from the reference strains at a level of 95% agreement. These results suggest that the present method could be conveniently applied to cell counts, as well as to the preliminary identification of bifidobacteria from a variety of sample types including human feces, dairy products, and commercial probiotic supplements.