• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국제학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.740-745
• /
• 1988

New design methods for constructing nonlinear adaptive control system are considered. The proposed adaptive controllers are applicable to the case where the degree of the controlled process is unknown. It is shown that the degree of the controller is determined independently of the degree of the process. Several types of nonlinear functions are introduced to deal with uncertainties of the degree of the process. Finally, some simulation results show the effectiveness and simplicity of the proposed methods.

• 대한기계학회논문집A
• /
• 제21권7호
• /
• pp.1030-1041
• /
• 1997

The control model in the tandem cold rolling mill consists of many mathematical theories and is used to calculate the reference values such as the roll gap and the rolling speed for good operation of rolling mill. But, the control model used presently has a problem causing inaccurate prediction of the rolling force. By the parameter identification, it was found that the main factor causing inaccurate prediction of the rolling force was incorrect modeling of the friction coefficient and the flow stress. To get rid of the erroneous factor new adaptive schemes are suggested in this work. Those are a long-time adaptation by the iterative least-square method and a short-time adaptation by the recursive weighted least-square method respectively. The new equations for the friction coefficient and the flow stress are derived by applying the suggested adaptive algorithms. Through the on-line test in an actual mill, it is proved that the rolling force predicted by the new equations is more accurate than the one by the existing equations ever used.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.307-310
• /
• 2003

In the maritime container terminal, LMTT(Linear Motor-based Transfer Technology) is horizontal transfer system for the yard automation, which has been proposed to take the place of AGV(Automated Guided Vehicle). The system is based on PMLSM (Permanent Magnetic Linear Synchronous Motor) that is consists of stator modules on the rail and shuttle car (mover). Because of large variant of mover's weight by loading and unloading containers, the difference of each characteristic of stator modules, and a stator module's trouble etc., LMCPS (Linear Motor Conveyance Positioning System) is considered as that the system is changed its model suddenly and variously. In this paper, we will introduce the soft-computing method of a multi-step prediction control for LMCPS using DR-FNN (Dynamically-constructed Recurrent Fuzzy Neural Network). The proposed control system is used two networks for multi-step prediction. Consequently, the system has an ability to adapt for external disturbance, cogging force, force ripple, and sudden changes of itself.

• 지역사회간호학회지
• /
• 제9권1호
• /
• pp.117-127
• /
• 1998

The Theory of Planned Behavior has been shown to yield great explanatory power in health behavior as well as social behavior. This study was conducted to test the Theory of Planned Behavior in the prediction and intention of smoking cessation behavior in university student smokers. We conveniently sampled 204 university student smokers and investigated using questionaries, analyzing the data with the Pearson product-moment correlation, and multiple regression. The results are as follows : 1. There are significant correlations in direct and indirect measures of attitude toward smoking cessation behavior, subjective norm, and perceived behavioral control. 2. Behavior belief is significant in predicting attitudes toward smoking cessation behavior. Normative belief is significant in predicting the subjective norm. Control belief is significant in predicting perceived behavioral control. 3. Attitude toward smoking cessation behavior, subjective norm are significant in predicting intention of smoking cessation behavior. In conclusion, this study demonstrated strong support for the Theory of the Planned Behavior and its use to predict smoking cessation behavior in university students smokers. But, as perceived behavioral control is not significant in predicting smoking cessation behavior, indepth research is needed to evaluate the usefullness of the Theory of Planned Behavior and Reasoned Action Theory.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.177-189
• /
• 2015

The output of the controller is said to exceed the input limits of the plant being controlled when a control system operates in a non-linear region. This process is called the windup phenomenon. The windup phenomenon is not preferable in the control system because it leads to performance degradation, such as overshoot and system instability. Many anti-windup strategies involve switching, where the integral component differently operates between the linear and the non-linear states. The range of state for the non-overshoot performance is better illustrated by the boundary integral error plane than the proportional-integral (PI) plane in windup inspection. This study proposes a PI controller with a separate closed-loop integral controller and reference value set with respect to the input command and external torque. The PI controller is compared with existing conventional proportional integral, conditional integration, tracking back calculation, and integral state prediction schemes by using ScicosLab simulations. The controller is also experimentally verified on a direct current motor under no-load and loading conditions. The proposed controller shows a promising potential with its ability to eliminate overshoot with short settling time using the decoupling mode in both conditions.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.767-770
• /
• 1998

This paper introduces an instruction fetch unit which is designed for RAPTOR, an on-chip multiprocessor. In order to reduce control hazards, the proposed fetch unit supports a hybrid branch prediction scheme which consists of a static scheme and the 2bC branch prediction scheme. The fetch unit also utilizes the branch folding technique with two instruction buffers to avoid the branch penalty caused by imspredictions. Instructions are predecoded in the fetch unit to achieve extra performance gain.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(3)
• /
• pp.5-8
• /
• 2000

In this paper, we propose new algorithms for the partition of input space and the generation of fuzzy control rules. The one consists of Shannon and extended fuzzy entropy function, the other consists of adaptive fuzzy neural system with back propagation teaming rule. The focus of this scheme is to realize the optimal fuzzy rule base with the minimal number of the parameters of the rules, reducing the complexity of the system. The proposed algorithm is tested with the time series prediction problem using Mackey-Glass chaotic time series.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.478-481
• /
• 1996

Tracking a target of versatile maneuver recently demands a stable adaptation of tracker, and the multiple model techniques are being developed because of its ability to produce useful information of target maneuver. This paper presents the way to apply the multiple model method in a moving-target and moving-platform scenario, and the estimation and prediction results better than those of single Kalman filter.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.359-362
• /
• 1996

The guidance system which uses the line-of-sight(LOS) rate to guide the missile towards its target has been used to the conventional differential game, such as the pursuer-evader game. Proportional navigation guidance and its derivatives have been shown to be an effective LOS rate guidance system. In this paper, we have used the genetic algorithm to construct the guidance system for the pursuer-evader type differential game. Also we have proposed the prediction model to obtain the informations about the intention of future actions of the pursuer and the evader.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.92.4-92
• /
• 2001

Estimation of the general along-track acceleration was performed in the KOMPSAT-1 orbit determination process. Several sets of the atmospheric drag and solar radiation pressure coefficients were also derived with the different spacecraft area. State vectors in the orbit determination with the different spacecraft area were compared in the time frame. The orbit prediction using the estimated coefficients was performed and compared with the orbit determination results. The orbit prediction with the different general acceleration values was also carried out for the comparison.