• 제목/요약/키워드: Precision-amplifier

검색결과 91건 처리시간 0.031초

공작기계용 센서노드 설계 및 제작기술 (Designing and Manufacturing Technology of Sensor Node for Machine Tools)

  • 장동영;권오성;박만진;김승재
    • 한국정밀공학회지
    • /
    • 제31권7호
    • /
    • pp.569-576
    • /
    • 2014
  • Sensor node means a device to include sensor, amplifier, and data acquisition (DAQ) equipment. The sensor converts physical signals to electric signals and weak signals from the sensor can be amplified through the amplifier. DAQ equipment converts analog signal to digital signal and collects converted digital signal. Since the sensor node is sensitive to the environment so that selection of mounting position and fixture design of sensor are applied differently depending on the characteristics of a target. This study is about designing and manufacturing sensor node to be used in a machine tool. The environment of machine tool is very severe due to noise, temperature fluctuation, and dust, etc. Hence, the sensor and amplifier must be designed and manufactured by considering the environmental issues. The designed and manufactured sensor node was tested for the reliability and effectiveness of the developed sensor nodes in the study.

고정밀도의 뇌파측정시스템 개발 연구 (Fabrication of EEG Measuring System with High Precision Characteristics)

  • 도영수;장호경;한병국
    • 한국의학물리학회지:의학물리
    • /
    • 제13권3호
    • /
    • pp.156-162
    • /
    • 2002
  • 본 연구에서는 뇌파 신호를 측정할 수 있는 고정밀도의 뇌파측정시스템을 제작하였다. 전치증폭기는 분리증폭기의 방식으로 잡음제거 능력을 향상하였으며, 높은 사용자 안전도를 갖도록 제작하였다. 제작된 뇌파측정시스템은 주파수 대역별로 알파, 베타, 세타로 자동으로 분류될 수 있도록 A/D 변환하였다. 변환된 데이터는 DSP를 이용하여 실시간으로 FFT처리를 하였다. 실험은 현재 병력이 없고 건강 상태가 양호한 만 20세에서 26세까지의 학생을 대상으로 실시하였다. 외부의 물리적인 자극이 뇌파에 미치는 영향을 조사하기 위하여, 현재 시판되고 있는 뇌파 자극기인 MS제품을 이용하여 시각과 청각의 두 상태로 외부자극을 주고, 그 반응을 측정하여 비교하였다. 피검자의 감성평가 측정결과 본 연구에서 제작한 뇌파측정기가 유효함을 확인하였으며, 심리적인 상태변화를 조사할 수 있었다.

  • PDF

변위증폭기를 이용한 마이크로 매니플레이터의 공리적 설계 (Axiomatic Design of a Micromanipulator using Displacement Amplifier)

  • 한석영;윤상준;황준성;김민수;박재용;이병주;김선정
    • 대한기계학회논문집A
    • /
    • 제31권1호
    • /
    • pp.62-69
    • /
    • 2007
  • Micromanipulator is a device that manipulates an object with high precision. Generally, a parallel-type robot has inherently higher precision than a serial-type robot. In most cases, the use of flexure hinge mechanisms is the most appropriate approach to micromanipulators. The micromanipulator is basically required that have high natural frequency and sufficient workspace. However, previous designs are hard to satisfy the required workspace and natural frequency, simultaneously, because the previous micromanipulators are coupled designs. Therefore, this paper suggests a new design parameter as displacement amplifier and new design procedure based on semi-coupled design in axiomatic design. As a consequence the spatial 3-DOF micromanipulator which is chosen as an exemplary device has natural frequency of 500Hz and workspace of $-0.5^{\circ}{\sim}0.5^{\circ}$. To investigate the effectiveness of the displacement amplifier, simulation and experiment are performed.

유연 힌지를 이용한 초정밀 3자유도 병렬 매니퓰레이터 개발 (Development of 3-DOF Parallel Manipulator Using Flexure Hinge)

  • 신동익;김영수;서승환;한창수;최두선;황경현
    • 한국정밀공학회지
    • /
    • 제26권7호
    • /
    • pp.127-133
    • /
    • 2009
  • We present a $3-{\underline{P}}RS$ compliant parallel manipulator actuated by PZTs. The motion ranges are $400-{\mu}m$ translation to the z-direction and 5.7-mrad rotation about any axis on the x-y plane. A mechanical amplifier whose advantage is approximately 5.5 is designed and integrated with flexure revolute and spherical joints in a monolithic way. We evaluated the performance of the system: kinematic and dynamic characteristics. In kinematic point of view, the flexures play the roles of conventional mechanism but any nonlinearity such as dead-zone and backlash, which make it possible to achieve the steady-state resolution less than $0.1{\mu}m$. The system shows resonance near 86 Hz with high magnitude and, therefore, poor transient response. But the settling is faster when the flexures are strained higher.

싱글칩 마이크로프로세서에 의한 프로그래머블 2중 적분형 A/D 변환기의 개발 (A Design of Programmable Dual Slope A/D Converter by Single Chip Microprocessor)

  • 최규석;박찬원
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
    • /
    • pp.335-337
    • /
    • 1993
  • Offset voltage and drift characteristics of operational amplifier are critical factor to precision AID conversion System. In this study, a method is suggested to design the programmable A/D conversion system which has high resolution and low drift characteristics. First, hardware was designed to reduce the offset voltage of integrator and comparator, and analog switches are connected to reduce the drift characteristics of operational amplifier. And then, a calibration software technique was performed to obtain the stable data from A/D converter. The main advantage of our method is high precision A/D converter can be constructed with low cost and high confidence. Therefore proposed method is expected to be used in the industrial field where a high precision measurement is required.

  • PDF

레이져를 이용한 진동측정장치 (The Measurement Systme of Vibration using Laser)

  • 진동희;전병철;조종두;김재도
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1993년도 추계학술대회 논문집
    • /
    • pp.357-362
    • /
    • 1993
  • In this study low priced laser measurement system was made, so its reliability was investigated Intensity distribution of laser beam measured by devised system and FFT analyzer and their results were examined for proving reliability of devised system. Transmitted laser beam intensity on photodiode changed by eccentrically rotating of disk cam and motor speed. To get results, photodiode and devised amplifier were used for changing voltage. After that, response signal was calculated by signal analysis program. It was found that the vibration of disk cam could be measured by the intensity distribution of laser beam and the same tendency was obtained by FFT. Change of motor speed effected the distribution of laser beam,which was obtained by devised system. Also linear distribution was got by sensitive balancing switch on amplifier according to the transmission of laser beam on photodide.

  • PDF

He-Ne 레이저를 이용한 와이어 방전가공기의 와이어 변위 측정 (Measurement of Wire Displacement of WEDM using He-Ne laser)

  • 홍준모;전병철;조용무;유웅재;김재도
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1995년도 춘계학술대회 논문집
    • /
    • pp.414-419
    • /
    • 1995
  • The wire displacement of wire electric discharge machine has been measured using He-Ne laser. A measurement system consisted of He-Ne laser, A/D converter, 4 divided photodiode, amplifier, sensor process instrument, and personal computer. The processing parameters were varid with feed rate, wire tension, wire speed and voltage. The laser beam intensity transmitted on a 4 divided photodiode was varied by processing wire electric descharge machine with various process parameters. The 4 divided photodiode and amplifier were used to change the detected beam intensity into voltage. Variation of wire displacement was between 11 and 125 .mu. m. The wire tension was dominant on the variation of wire displacement among many parameters.

  • PDF