• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.53-60
• /
• 2001

This paper presents a position control of a platform at the seaport cargo handling system. After brief description of the operating principles of the cargo handling system, the governing equation of the moving platform is derived. The equation is described in the state space model, and a robust H$_{\infty}$ controller to achieve position tracking of the moving platform. which can carry 200ton of containers, is formulated. In the synthesis of the controller, the weight of the container is treated as uncertain parameter. Both regulating and tracking control responses are analyzed for the loading and unloading procedures of the proposed automatic cargo handling system.

• 대한기계학회논문집A
• /
• 제35권4호
• /
• pp.347-352
• /
• 2011

일반 산업용 로봇의 위치정밀도는 $100{\mu}m$ 정도임에 반해, 정밀부품의 조립공차는 수십 ${\mu}m$ 이내이다. 또한, 조립공차가 작을 경우 미소한 위치/각도 오차에 의해 재밍 또는 웨징이 쉽게 발생하며, 위치제어 기반의 로봇인 경우 부품 조립 시 접촉력을 적절히 조절하지 못하여 조립물이 파손될 가능성이 크다 이와 같은 문제를 해결하기 위하여 접촉력에 능동적으로 반응할 수 있는 힘제어 기반의 로봇조립에 대한 연구가 진행되고 있다. 본 연구에서는 기존의 산업용 로봇에 적용하기 용이하도록 위치제어 기반의 머니퓰레이터에 힘제어를 적용할 수 있는 시스템을 구현하였다. 머니퓰레이터에 어드미턴스 필터를 이용한 임피던스 제어를 적용하여 안정적인 접촉운동을 구현하였다. 또한, 임피던스 제어와 blind 검색을 적용하여 정밀부품을 조립할 수 있음을 검증하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.65-68
• /
• 2002

In a high speed spindle system, it is very important to monitor the state of rotating rotor. Particularly in active control spindle system, the position sensor must provide feedback to the control system on the exact position of the rotor. In order to monitor the state of a high speed spindle exactly, High accuracy and wide frequency bandwidth of sensors are important. This paper describes the factors which has an effect on performances of inductive position sensor. We also report the experimental results that characterize the performances of the inductive position sensor.

• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.22-30
• /
• 2003

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.509-510
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.605-606
• /
• 2006

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.235-240
• /
• 1995

In order to eliminate position errors existing at the steady state in the motion control of robotic manipulators, a new fuzzy control algorithm is proposed using three variables, position error, velocity error and integral of position errors as input variables of the fuzzy controller. Three dimensional look-up table is used toreduce the computational time in real-time control, and a technique reducing the amount of necessary memory is introduced. Simulation and experimental studies show that the position errors at the steady state are decreased more than 90% compared to those of existing fuzzy controller when the proposed fuzzy controller is applied to the 2 axis direct drive SCARA robot manipulator.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1012-1017
• /
• 2003

The development of a fast, accurate, and inexpensive position-controlled pneumatic actuator that may be applied to a variety of practical positioning applications with various external loads is described in this paper. A novel modified pulso width modulation (MPWM) valve pulsing algorithm allows on/off solenoid valves to be used in place of costly servo valves. A comparison between the system response of standard PWM technique and that of the novel modified PWM technique shows that the control performance is significantly increased. A state feedback controller with position, velocity and acceleration feedback is successfully implemented as the continuous controller. Switching algorithm of control parameter using learning vector quantization neural network (LVQNN) is newly proposed. which estimates the external loads of the pneumatic actuator. The effectiveness of the proposed control algorithms are demonstrated through experiments with various loads.

• 한국정밀공학회지
• /
• 제25권10호
• /
• pp.58-66
• /
• 2008

In the development of intelligent vehicles, path tracking of unmanned vehicle is a basis of autonomous driving and automatic navigation. It is very important to find the exact position of a vehicle for the path tracking, and it is possible to get the position information from GPS. However the information of GPS is not the current position but the past position because a vehicle is moving and GPS has a time delay. In this paper, therefore, the moving distance of a vehicle is estimated using a direction sensor and a velocity sensor to compensate the position error of GPS. In the steering control, optimal fuzzy rules for the path tracking can be found through the simulation of Simulink. Real driving experiments show the fuzzy rules are good for the steering control and the position error of GPS is well compensated by the proposed estimation method.

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.87-98
• /
• 1999

This study is concentrated on the development of real-time estimation model and vision control method as well as the experimental test. The proposed method permits a kind of adaptability not otherwise available in that the relationship between the camera-space location of manipulable visual cues and the vector of manipulator joint coordinates is estimate in real time. This is done based on a estimation model ta\hat generalizes known manipulator kinematics to accommodate unknown relative camera position and orientation as well as uncertainty of manipulator. This vision control method is roboust and reliable, which overcomes the difficulties of the conventional research such as precise calibration of the vision sensor, exact kinematic modeling of the manipulator, and correct knowledge of position and orientation of CCD camera with respect to the manipulator base. Finally, evidence of the ability of real-time vision control method for manipulator's position control is provided by performing the thin-rod placement in space with 2 cues test model which is completed without a prior knowledge of camera or manipulator positions. This feature opens the door to a range of applications of manipulation, including a mobile manipulator with stationary cameras tracking and providing information for control of the manipulator event.