• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.114-117
• /
• 2006

One of the most important tasks of ocean color observations is to determine the distribution of phytoplankton primary production. A variety of bio-optical algorithms have been developed estimate primary production from these parameters. In this communication, we investigated the possibility of using a novel universal approximator-support vector machines (SVMs)-as the nonlinear transfer function between oceanic primary production and the information that can be directly retrieved from satellite data. The VGPM (Vertically Generalized Production Model) dataset was used to evaluate the proposed approach. The PPARR2 (Primary Production Algorithm Round Robin 2) dataset was used to further compare the precision between the VGPM model and the SVM model. Using this SVM model to calculate the global ocean primary production, the result is 45.5 PgC $yr^{-1}$, which is a little higher than the VGPM result.

• 동굴
• /
• 제81호
• /
• pp.1-5
• /
• 2007

The magnetic polishing is the useful method to finish some machinery fabrications by using magnetic power This method is one of the precision techniques and has an aim for clean technology in the transportation of the pure gas in the clean pipes. The magnetic abrasive polishing method is not so common in the field of machine that it is not known to widely. There are rarely researcher in this feilld because of non-effectiveness of magnetic abrasive. Therefore, in this paper we deals with the development of the magnetic abrasive with the fse of Sr-Ferrite. In this development, abrasive grain A has been made by using the resin bond fabricated at low temperature. And magnetic abrasive powder was fabricated from the Sr-Ferrite which was crushed into 200 mesh. The XRD analysis result shows that only A abrasive and Sr-Ferrite crystal peaks were detected, explaining that resin bond was not any more to contribute chemical reaction. From SEM analysis, we found that A abrasive and Sr-Ferrite were strongly bonding with each other.

• 소성∙가공
• /
• 제15권1호
• /
• pp.65-70
• /
• 2006

In recent industry, with the miniaturization and high-precision of machine part, the development of mold manufacturing technology for mass production is accompanied by the development of new technology such as IT and BT In this study, the spiral type injection mold with a $200{\mu}m$ thickness is made to. investigating the influence of injection molding parameter and the flow length is measured through an experiment. Besides, Taguchi method is used in this experiment and the obtained data are analyzed using ANOVA method.

• Tribology and Lubricants
• /
• 제26권6호
• /
• pp.329-335
• /
• 2010

Recently, the End-milling processing is needed the high-precise technique to get a good surface roughness and rapid time in manufacturing of precision machine parts and electronic parts. The optimum surface roughness has an effect on end-milling working condition such as, cutting direction, spindle speed, feed rate and depth of cut, and so on. It needs to form the correlation of working conditions and surface roughness. Therefore this study was carried out to presume of surface roughness on end-milling working condition of Al7075 by regression analysis. The results was shown that the coefficient of determination($R^2$) of regression equation had a fine reliability of 87.5% and nonlinear regression equation of surface rough was made by multiple regression analysis.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.10-17
• /
• 2003

The amount of production orders from Japanese car and construction machine industries have slightly increased in 2002, but the costs of the forged parts have decreased due to severe competitions with the other Asian countries. Most of the forging industries and some universities are making more efforts for technological researches and developments to meet the demand for higher accuracy and higher quality products, shortening of delivery time, and development of forged parts for new industrial fields. Some helical gears of which surfaces can be net-shaped have been started for commercial base production to be shipped to car industries. Some non-graphite lubricants for hot forging and some conversion coating free lubricants for cold forging have been developed to improve some environmental problems.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1040-1043
• /
• 1996

The accuracy of the servo control in CNC system has a great influence on the duality of machine product. Tracking performance of the servo control is deteriorated mainly by the time delay of the servo system and the inertia of the work table or bed. Contouring errors occur in every interpolation steps by the effect of the tracking performance. In this paper, $H_{\infty}$ two-degree-of-freedom(TDF) controller is designed for improvement to improve the tracking performance. The designed controller is applied 3-axis machining center model and the cutting accuracy is simulated in case of corner cutting, circular and involute interpolation. Simulation results show that $H_{\infty}$ TDF controller designed in this paper has a good effect to improve tracking performance in CNC system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집(한일합동학술편); 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.770-775
• /
• 1987

In this paper, design and development experiences of a vision based robotic assembly system for electronic components are described. Specifically, the overall system consists of the following three subsystems each of which employs a 16 bit Preprocessor MC 68000 : supervisory controller, real-time vision system, and servo system. The three microprocessors are interconnected using the time shared common memory bus structure with hardwired bus arbitration scheme and operated as a master-slave type in which each slave is functionally fixed in view of software. With this system architecture, the followings are developed and implemented in this research; (i) the system programming language, called 'CLRC', for man-machine interface including the robot motion and vision primitives, (ii) real-time vision system using hardwired chain coder, (iii) the high-precision servo techniques for high speed de motors and high speed stepping motors. The proposed control system were implemented and tested in real-time successfully.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.638-642
• /
• 2005

This research develops the robot for the machining work. For machining work(cutting, milling, grilling, etc.), a robot manipulator is constructed by combining a parallel and a serial mechanism to increase stiffness as well as enlarge workspace. Based on the geometric constraints, this paper develops the formulation for inverse/direct kinematics and Jacobian to design and control a robot. Workspace is also analyzed to prove the advantage of the proposed robot.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.146-150
• /
• 2000

In order to prevent the defects, the optimum design of the production part, strip process layout, die design, die making and try out etc. are necessary the analysis of effective factors. For example, theory and practice of metal shearing process and it's phenomena, die structure, machine tool working for die making, die materials and it's heat treatment, metal working in field, their know how etc. are included in those factors. In this study, we analyzed whole of data base, theoretical back ground of metal working process, and then performed the progressive die tryout with the screw press. Part2 of this study reveals with ultra precision progressive die design, its making and tryout.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.711-712
• /
• 2008

We developed a XMAS (X Multimedia Analysis System) for analyzing the illegal and objectionable multimedia in Internet environment based on Web2.0. XMAS uses the MPEG-7 visual descriptor and multi-class SVM (support vector machine) and its performance (accuracy on precision) is about 91.6% for objectionable multimedia analysis and 99.9% for illegal movie retrieval.