• 제목/요약/키워드: Precipitation Separation

검색결과 179건 처리시간 0.031초

폐해수로부터 마그네슘의 분리.회수에 관한 연구 (A Study on the Separation and Recovery of Magnesium from Waste Bittern)

  • 주창식;이경옥;정성욱;박흥재;나석은;정갑섭
    • 한국환경과학회지
    • /
    • 제10권5호
    • /
    • pp.381-386
    • /
    • 2001
  • The characteristics of precipitation separation and solvent extraction separation of magnesium from the waste bittern were studied experimentally In the result of precipitation separation, the size of magnesium hydroxide precipitated was not affected on pH, but decreased with increasing the precipitation temperature. The purity of magnesium oxide precipitated was increased with pH beyond pH 11. From the solvent extraction separation, the equilibrium extraction ratio of magnesium was increased with pH and temperature of extraction phase, the concentration of stripping phase, and with decreasing pH of stripping phase. The extractant of Aliquat 336 and Acid 810 mixture was more effective than that of DCH18C6 and $D_2EHPA$ mixture in the extraction separation of magnesium.

  • PDF

CuCl 미립자 분산 붕괴산염계 비선형 광학유리에서 매질유리의 상분리와 CuCl 미립자의 석출 특성 (Phase Separation of Matrix Glasses and Precipitation Characteristics of CuCl Nanocrystals in CuCl Doped Borosilicate Glasses for Nonlinear Optical Application)

  • 윤영권;한원택
    • 한국세라믹학회지
    • /
    • 제34권8호
    • /
    • pp.886-896
    • /
    • 1997
  • To investigate an effect of phase separation on precipitation characteristics of CuCl nanocrystals in CuCl doped nonlinear optical glasses, borosilicate glass systems with 9 different compositions with ~2wt% of CuCl were selected and CuCl doped glasses were prepared by melting and precipitation method. Microstructural properties of the CuCl doped glasses were analyzed by optical absorption spectroscopy, acid elution test, TEM, and EDXS. While phase separation did not occur in Glass A~D, interconnected and droplet microstructures due to phase separation were found in Glass E, F and Glass G~I, respectively. In the particular composition of the matrix glasses in this study, the precipitation of the CuCl particles was observed in the phase separable glasses, not in phase non-separable glasses. The CuCl particles were precipitated in both silica-rich phase region and boronrich phase region of the glass matrix. In the case of 7.7Na2O-36.6B2O3-52.7SiO2(mole%) glass, the larger CuCl particles than those in the silica-rich phase region were observed in the boron-rich phase region.

  • PDF

ZnS 미립자 분산 붕규산엽계 유리에서의 분상 및 미립자 석출 특성 (Phase Separation and Precipitation Characteristics in ZnS doped Borosilicate Glasses)

  • 이승환;류봉기
    • 한국세라믹학회지
    • /
    • 제35권12호
    • /
    • pp.1337-1342
    • /
    • 1998
  • To investigate an effect of phase separation on precipitation characteristics of ZnS microcrystals in ma-trix glass ZnS doped borosilicate glasses for nonlinear optical applications were prepared by melting and pre-cipitation process. ZnS dopant contributed to phase separation promotion which increased the phase separa-tion of the matrix glass within immiscibility region. It was also found that ZnS as phase separation promoter showed a similar contribution for some selected glass compositions in miscibility region. The precipitation of ZnS microcrystals occurred in thephase separable glass compoitions. The radius of ZnS microcrystals in-creased with increasing the heat treatment temperature and Na2O contents of matrix glass composition. The ZnS particle sizes estimated by effective mass approximation ranged from about 30 to 80${\AA}$ It was suf-ficiently small to show quantum confinement effect.

  • PDF

바이오디젤 부산물로부터 글리세롤의 분리 (Glycerol Separation from Biodiesel Byproduct)

  • 양영미;김광제;이용택
    • 공업화학
    • /
    • 제19권6호
    • /
    • pp.690-692
    • /
    • 2008
  • 바이오디젤 부산물로부터 중화, 침전, 증류 등의 처리 공정을 거쳐 순수한 글리세롤을 분리할 수 있었다. 황산, 인산, 염산 등을 이용하여 산의 농도와 중화처리 온도에 따라 전처리, 증류공정을 통하여 얻어진 글리세롤 함량을 비교하였다. 염산은 5~37 wt%, 황산은 5~95 wt%, 인산은 5~85 wt% 범위 내에서 각각 중화 실험을 수행하였다. 중화처리 침전온도는 각 산에 대해 293~333 K 범위 내에서 변화시켰다. 그 결과 10 wt% 황산과 313 K의 85 wt% 인산처리 침전 온도로 각각 중화 처리한 경우에서 염 제거가 잘 이루어져 증류된 글리세롤 함량이 가장 높았다. 산 농도와 전처리 온도 조건의 변화는 바이오디젤 부산물로부터의 글리세롤 회수에 어느 정도 영향을 미쳤다.

시간강수계열의 강수발생과정에 대한 추계학적 모형 (A Stochastic Model for Precipitation Occurrence Process of Hourly Precipitation Series)

  • 이재준;이정식
    • 한국수자원학회논문집
    • /
    • 제35권1호
    • /
    • pp.109-124
    • /
    • 2002
  • 본 연구는 간헐 수문사상인 시간강수계열의 구조적 특성을 고찰하여 강수발생의 군집성을 고려한 강수발생과정에 대한 추계학적 모의발생 모형을 개발한 것이다. 먼저 강수사상의 발생패턴을 기술하기 위해 Poisson 군집과정을 사용하였고, 이 과정에서 군집간의 시간과 군집내의 사상 수는 지수분포로 기술하였다. 둘째로 사상의 지속기간과 군집내에서 사상간의 시간은 음대수혼합분포로 기술하였다. 마지막으로 이상과 같은 시간강수사상의 발생패턴과 사상기간내의 강수의 종속구조를 구명하기 위해 서울을 대상으로 하여 실적강수자료를 분석하였다. Monte Carlo 모의결과는 모형이 강수발생의 계절적 패턴, 사상특성의 주변 및 조건부 분포를 잘 재현하고 있음을 보여주었다.

수용액(水溶液)에서 코발트와 니켈 분리(分離) (Separation of Cobalt and Nickel from Aqueous Solution)

  • 류양;이만승
    • 자원리싸이클링
    • /
    • 제22권1호
    • /
    • pp.11-19
    • /
    • 2013
  • 코발트와 니켈에 대한 수요가 증가함에 따라 다양한 자원으로부터 순도가 높은 상태로 이 금속들을 회수하는 것은 중요하다. 고순도 코발트와 니켈을 얻기 위해서는 다른 금속이온과의 분리가 필요하다. 본 총설에서는 순수한 코발트와 니켈용액을 얻을 수 있는 용매추출, 이온교환 및 침전법을 소개하고 비교하였다. 특히 용매추출에 대해서는 기존 공정의 장단점과 함께 공정조건을 조사하였다.

Fundamental study on sustainable treatment system of mine water using magnetized solid catalyst

  • Mukuta, Chisato;Akiyama, Yoko
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제21권2호
    • /
    • pp.15-21
    • /
    • 2019
  • In the mine exploration sites, sustainable treatment system of mine water with energy saving and minimized chemical additives is required. Since most of the mine water contains highly-concentrated ferrous ion, it is necessary to study on the removal method of iron ions. We propose the system consisting of two processes; precipitation process by air oxidation using solid catalyst-modified magnetite and separation process combining gravitational sedimentation and magnetic separation using a permanent magnet. Firstly, in the precipitation process (a former process of the system), we succeeded to prepare solid catalyst-modified magnetite. Air oxidation using solid catalyst-modified magnetite using $Fe_2(SO_4)_3$ as a starting material showed high iron removal capability. Secondly, in the separation process (latter process of the system), solid catalyst-modified magnetite using $Fe_2(SO_4)_3$ as a starting material can be separated by a superconducting bulk magnet and a permanent magnet.

황산철(III)용액에서 란타넘(III)의 선택적 침전 분리 (Separation of Lanthanum(III) by Selective Precipitation from Sulfuric Acid Solution Containing Iron(III))

  • 송시정;이만승
    • 자원리싸이클링
    • /
    • 제30권2호
    • /
    • pp.31-38
    • /
    • 2021
  • 철(III)과 란타넘(III)이 혼합된 황산용액에서 황산나트륨에 의한 란타넘 복염의 침전 및 분리를 조사했다. 복염 침전에 영향을 줄 수 있는 여러 요인 중 황산나트륨 및 란타넘(III)의 농도, 반응온도 및 시간, 그리고 철(III) 농도에 대해 조사했다. 용액 중 Na+, SO42- 이온 및 란타넘(III) 농도가 높을수록 희토류 복염의 침전률이 증가했고, 반응온도가 100℃까지 증가함에 따라 란타넘 황산염 이온의 형성을 촉진해 희토류 복염의 침전률이 증가했다. 또한 반응시간이 증가할수록 철(III)의 침전률이 감소해 3시간 이후에는 거의 침전되지 않았고, 철(III) 농도는 복염 침전에 큰 영향을 미치지 않았다. 황산용액에 황산나트륨을 첨가하면 란타넘(III)을 선택적으로 침전시켜 철(III)과 분리할 수 있다.

세사 투입에 따라 형성된 플럭의 물리적 특성 (Effects of ballasting Agent (Microsand) on Physical Floc Characteristics)

  • 류재나;임윤대;오재일
    • 상하수도학회지
    • /
    • 제24권5호
    • /
    • pp.485-493
    • /
    • 2010
  • Chemical coagulation destabilizes colloidal particles so that particles grow to larger flocs. Solid particles are then removed by solid-liquid separation after typical precipitation. Rapid precipitation enhances the separation by reducing the precipitation time with larger and denser particles. Conventionally, polyelectolyte compounds (polymers) function as a flocculant aid by introducing a interparticle binding, which increases the particle size and density. And more recent ballasted flocculation adds a ballasting agent (microsand) to form denser particles with its high-density(sp gr=2.65). The current research was to evaluate the manner in which ballasted flocs are formed under different injection timings of microsand and to recognize the effects on floc formation. $FeCl_3$ as a coagulant, anionic polymer for a flocculation aid and microsand were used for the floc formation. Floc size (diameter) was widely ranged with the highest mean value when microsand was injected between $FeCl_3$ and polymer. Mean floc density was larger when the floc formed smaller. Settling velocity increased with larger floc size, whilst not significantly affected by the timing of microsand injection. The additional slow mixing on floc formation increased floc size to some extent.