• Food Science of Animal Resources
• /
• v.33 no.3
• /
• pp.390-394
• /
• 2013

The aim of this study was to determine the optimal storage condition of pre-packed Hanwoo beef without freezing. Hanwoo loin was purchased from a local distributor at 48 h after slaughter, then sliced in $1.5{\pm}0.5$ cm thickness, and packed in a polyethylene (PE) tray covered with linear low-density polyethylene (LLDPE) film. The studied factors to set the optimal storage condition were chamber temperature (5, 2.5 and $-1^{\circ}C$ for 14 d), cooling method (direct and indirect cooling system), and ultraviolet (UV) light irradiation for beef surface sterilization (0, 30, 60, and 120 min). The changes of pH, thiobarbituric acid reactive substances (TBARS) and number of aerobic bacteria were measured during storage. Beef samples stored in $-1^{\circ}C$ showed the minimal increasing rate in TBARS and microbial growth. After 15 d of storage, there was no significant difference in pH and TBARS values. However, the microbial population of beef stored in direct type cooling chamber ($4.25{\pm}0.66$ Log CFU/g) was significantly lower than that of beef stored in indirect type chamber ($6.47{\pm}0.08$ Log CFU/g) (p<0.05). After 4 d of storage, 60 or 120 min UV light irradiated beef samples showed significantly lower microbial population, and at 14 d of storage, 60 min UV irradiated beef sample showed significantly lower microbial population ($3.14{\pm}0.43$ Log CFU/g) than control ($4.46{\pm}0.13$ Log CFU/g) (p<0.05). However, TBARS values of 60 or 120 min UV light irradiated beef samples were significantly higher than non-irradiated beef sample after 4 d of storage (p<0.05).

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.114-119
• /
• 2016

In this study, we tried to add the conductivity to natural polymer like bacterial cellulose (BC) coated with the conductive polymer PEDOT:PEG, graphene and silver nano-wire (AgNW). Sulfuric acid of 10 to 20% was previously mixed with PEDOT:PEG and then the solution was electron spin-coated on the BC membrane. And then, additive coating with graphene and AgNW were done to improve conductivity, which was examined by hall effect. As the result, we confirmed a considerable improvement of conductivity compared to BC-coated film without sulfuric acid treatment as $2.487{\times}10^{10}$ vs $8.093{\times}10^{15}$ ($1/cm^3$), showing higher electron density with $3.25{\times}10^5$ times. Also, we identified that changed particle type to the polymer type by sulfuric acid using SEM analysis. For FT-IR analysis, it was confirmed that S-O radical ($1200cm^{-1}$) increased in the sulfuric acid treatment than non-treated sulfuric acid. As the method used very small amount of PEDOT:PEG, its transparency could be kept, and pre-treatment process of sulfuric acid will be able to simplify the production process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.193-193
• /
• 2012

In thin film silicon solar cells, p-i-n structure is adopted instead of p/n junction structure as in wafer-based Si solar cells. PECVD is the most widely used thin film deposition process for a-Si:H or ${\mu}c$-Si:H solar cells. Single-chamber PECVD system for a-Si:H solar cell manufacturing has the advantage of lower initial investment and maintenance cost for the equipment. However, in single-chamber PECVD system, doped and intrinsic layers are deposited in one plasma chamber, which inevitably impedes sharp dopant profiles at the interfaces due to the contamination from previous deposition process. The cross-contamination between layers is a serious drawback of single-chamber PECVD system. In this study, a new plasma process to solve the cross-contamination problem in a single-chamber PECVD system was suggested. In order to remove the deposited B inside of the plasma chamber during p-layer deposition, a high RF power was applied right after p-layer deposition with SiH4 gas off, which is then followed by i-layer, n-layer, and Ag top-electrode deposition without vacuum break. In addition to the p-i interface control, various interface control techniques such as FTO-glass pre-annealing in O2 environment to further reduce sheet resistance of FTO-glass, thin layer of TiO2 deposition to prevent H2 plasma reduction of FTO layer, and hydrogen plasma treatment prior to n-layer deposition, etc. were developed. The best initial solar cell efficiency using single-chamber PECVD system of 10.5% for test cell area of 0.2 $cm^2$ could be achieved by adopting various interface control methods.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.39-41
• /
• 2011

The recycling rate of recovered paper in Korea is the highest in the world, 92%, but remanufacturing yield is low due to the extremely poor quality of the paper. The poor quality, in turn, influences to the reject amount in deinking process. To increase the yield of old newspaper recycling process, hydrophobic degree of inorganic pigments of deinking stock must be reduced. To determine the hydrophobicity, Pitch Potential Deposit Tester (PDT) was newly designed and applied with respect to the SB latex property of various quality used in Korea; its hydrophobic degree according to Tg, gel content, charge and particle size of latex and optimum designing condition of SB latex. And below are the conclusions: 1. The reason of excessive reject from old newspaper deinking process for total amount of printed ink is loss of inorganic pigments. When lipase, a biochemical catalyst, was applied with the purpose of preventing inorganic pigments loss about more than 70% of total reject weight and promoting hydration of pulp for deinking, deinking process yield of pre flotation secondary stage increased remarkably without any changes of deinking efficiency. 2. Lipase improved deinking stock by cutting ester linkage on surface of hydrophobic materials to promote its hydration. From this, it reached the conclusion that hydration degree of stock exercises significant effect on flotation deinking process yield. 3. Inorganic alkali promotes hydration of deinking stock. But there have been needs for more fundamental measures other than inorganic alkali of promoting hydration for yield improvement. For this, this study intended to find out reasons of chemical properties change on surface of hydrophobic material by change of pH. 4. Pitch Deposit Test (PDT) was performed for understanding principle of why surface of coating flake from OMG is hydrophobic and why it becomes hydrophilic when pH of stock is alkaline. As a result of this test, it is determined that swelling property by change of pH of latex film, which were used as coating adhesive is the reason for hydrophobic change. 5. Hydrophilicity of coating flake increased with hydrophilic pigments. And as more of SB Latex adhesive was used and higher of calcium hardness of stock became, its hydrophilicity decreased. SB Latex adhesive film is reformed by mechanical friction. For having hydrophilicity under neutral pH, strong bruising action such as kneading is required. 6. Because swelling of adhesive film decreases as Tg of SB latex gets lower and mean diameter gets smaller, it shows hydrophobicity under neutral pH. This lowers hydrophilicity of coating flake, which leads to easy elimination with flotation reject on DIP process. Therefore, for improving future flotation yield, it is necessary to develop to use eco-friendly clean SB latex by raising Tg and increasing mean diameter for recycling, and as a result, to reduce excessive loss of coating flake as a reject from deinking process.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.153-168
• /
• 2015

In Kyung-GI DO, An-sung, Each local autonomous entity developed the character design to inform the public relations and revitalize local economy and culture. consequently, These have got benefits with marketing local speciality related to their an-sung character; we call it name is arum, pung-mul, duck-bugi who korea traditional face characters. On the contrary, Most of old characters which have been fallen off their formative qualities became a reason that unfit (4D,3D) special film at local doom movie theater. This thesis aims to study on the character of 'namsadang' group what have been produced in ansung-si, that the show up to people about an-sung 4D Contents what local actually character and to make it more competitive through 3D,4D spacial character project developing process. It is need for new various characters, that (3D,4D-VFX) -Graphics of new an-sung'namsadang' group. that will be total different and new development. total VFX; 4-Dimantion visual graphics released in next an-sung local festival, Business prospects are bright and receiving benefits are increasing. As seen in the case of the character of in 2015, it can be a measure to earn benefits as a higher value-added business if it is managed in the local autonomous entities. In this thesis, I propose what the of character in the local special graphics; VFX style characters design. also I was show up to '4D contents character;' ; 'namsadang' group; creative processing including planing. It is possible to be ranged from special 4D series animation, a feature-length special effct cartoon film, character products, and even local doom Theme parks show up film. which are all expected high profits. These profits will be returned back to the an-sung local autonomous entity, who can use them to develop new contents, one of foundations in local economy. As a result, it is helpful to make local traits and effective tourist attractions.

• Korean Journal of Food Science and Technology
• /
• v.31 no.6
• /
• pp.1557-1562
• /
• 1999

As a series of studies on the preservation methods for boiled-dried anchovies, determination of sorption properties and shelf-life prediction were made for the samples. Dried anchovies, which were gamma-irradiated at pre-established dose (5 kGy) after packaging in both a polyethylene film (PE, 0.1 mm) and a laminated film $(nylon\;15\;{\mu}m/polyethylene\;100\;{\mu}m,\;NY/PE)$, were subjected to a quality evaluation during 4 months at different storage conditions, such as $15^{\circ}C/68%\;RH,\;25{\circ}C/75%\;RH,\;and\;35^{\circ}C/84%$ RH. The sample showed 5.47% of BET monomolecular layer moisture content and the corresponding water activity, 0.15. The velocity constants of browning reaction and organoleptic changes in the sample were in proportion to storage temperature, and $Q_{10}$, values were ranged from 2.17 to 2.40 in a given packaging and irradiation conditions. In the shelf-life prediction of the stored sample at $25^{\circ}C$, non-irradiated groups packaged in PE and NY/PE were 84 days and 125 days. While 5 kGy-irradiated groups in the same packaging were 126 days and 138 days, respectively. This finding proved the efficacy of laminated-film packaging and irradiation treatment in preserving the quality of dried anchovies.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.331-337
• /
• 2003

This paper represents 50 ㎓ narrow band pass filters for fiber optical communication fabricated by dual ion beam sputtering method. We have analyzed the characteristics of the TA$_2$ $O_{5}$ and $SiO_2$ single layers in order to optimize the process conditions for the 50 ㎓ narrow band pass filters, and controlled the film thickness uniformity to less than 0.1 nm deviation by dual peak spike filter pre-deposition. We designed and fabricated 50 ㎓ narrow band pass filters that consist of 216 layers including 4 cavities based on quarter wave optical thickness. Class substrates with high thermal expansion coefficients were used to reduce the film stress. Anti-reflection coating at the rear side of the substrate was also needed to reduce the optical thickness errors of the Optical Monitoring System caused by multiple beam interference between the front side and the rear side of substrate. The optical characteristics of this 50 ㎓ narrow band pass filters are insertion loss of 0.40 ㏈, pass band ripple of 0.20 ㏈, and pass bandwidth at -0.5 ㏈ of 0.20 nm. and isolation bandwidth at -25 ㏈ of 0.6 nm, which satisfy specifications of dense WDM system in fiber optical communications.tions.

• Korean Journal of Agricultural Science
• /
• v.42 no.1
• /
• pp.37-46
• /
• 2015

This study was carried out to determine the effect of storage condition, such as temperature and relative humidity (RH), on the change of sensory properties and free fatty acid composition of pre-packed Hanwoo loin (Musculus longissimus) until $21^{st}$ day of storage. The Hanwoo loin was sliced in $1.0{\pm}0.2cm$ thickness and each of the sliced pieces was packed in a foamed polystyrene tray with linear low-density polyethylene (LLD-PE) film to simulate the pre-packed Hanwoo loin sold in retail market, then stored in home-style refrigerator (Con; $5^{\circ}C$, 17%RH), and temperature and RH controled chambers (T1; $5^{\circ}C$, 55%RH, T2; $5^{\circ}C$, 85%RH, and T3; $-1^{\circ}C$, 99%RH), respectively. The sensory characteristics of pre-packed Hanwoo loin during storage in different conditions were measured on raw or after cooking. After 21 days of storage, the loin stored in T3 showed significantly high color and acceptability scores ($7.46{\pm}1.07$, $7.06{\pm}1.36$, respectively) on raw loin, and flavor and acceptability scores ($7.16{\pm}0.90$, $6.90{\pm}0.92$, respectively) on cooked loin than those of others (p<0.05). The concentration of 12 fatty acids of pre-packed Hanwoo loin during storage in different conditions were analysed. The concentration of oleic acid (C18:1, $39.92{\pm}3.22%$), palmitic acid (C16:0, $28.20{\pm}2.42%$), and stearic acid (C18:0, $12.59{\pm}2.79%$) was high in Hanwoo loin on $1^{st}$ day of storage. The concentration of palmitic acid of Hanwoo loin stored in T2 was increased significantly after $4^{th}$ day of storage (p<0.05), and the concentration of myristic acid(C14:0) of Hanwoo loin stored in treated chamber (T1 to T3) was significantly higher than Con after $14^{th}$ day of storage (p<0.05). The concentration of linolenic acid (C18:3) of Hanwoo loin was decreased significantly after $4^{th}$ day of storage in all tested storage conditions (p<0.05). However, there was no significant or consistent change in the concentration of oleic acid (C18:1) during storage period in every Hanwoo loin stored in tested conditions. Although, the concentration of total monounsaturated fatty acids (MUFA) was decreased in Con and T2 (p<0.05), there was no consistent change in the monounsaturated fatty acids to saturated fatty acids ratio (MUFA/SFA) during storage period (p>0.05). From those results, it was considered that storage condition affects on the sensory acceptability and fatty acid composition of pre-packed Hanwoo loin as storage period was increased.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.176-177
• /
• 2016

In the last few decades, attention toward atmospheric pressure plasma (APP) has been greatly increased due to the numerous advantages of those applications, such as non-necessity of high vacuum facility, easy setup and operation, and low temperature operation. The practical applications of APP can be found in a wide spectrum of fields from the functionalization of material surfaces to sterilization of medical devices. In the secondary battery industry, separator film has been typically treated by APP to enhance adhesion strength between adjacent films. In this process, the plasma is required to have high stability and uniformity for better performance of the battery. Dielectric barrier discharge (DBD) was usually adopted to limit overcurrent in the plasma, and we developed the pre-discharge technology to overcome the drawbacks of streamer discharge in the conventional DBD source which makes it possible to produce a super-stable plasma at atmospheric pressure. Simulations for the fluid flow and electric field were parametrically performed to find the optimized design for the linear jet plasma source. The developed plasma source (Plasmapp LJPS-200) exhibits spatial non-uniformity of less than 3%, and the adhesion strength between the separator and electrode films was observed to increase 17% by the plasma treatment.

• Progress in Superconductivity
• /
• v.13 no.2
• /
• pp.122-126
• /
• 2011

Superconducting $MgB_2$ thin films were fabricated by using a novel aerosol deposition technique wherein the pre-reacted powder is directly transformed into respective thin film. The formed thin films were characterized by X-ray diffraction technique and FE-SEM to understand its structure and morphology and the superconducting behavior has been characterized with the four probe resistivity measurement. The as-deposited thin films were formed into the frustrated amorphous structure, which were relaxed on the further heat treatment at $900^{\circ}C$ for 3 hrs. The relaxed amorphous $MgB_2$ thin films showed a comparatively high superconducting onset at about 38 K.