• Physical Therapy Korea
• /
• v.23 no.1
• /
• pp.80-86
• /
• 2016

Background: Prone hip extension (PHE) can be performed to measure the lumbopelvic motor patterns and motions. Imbalances in lumbopelvic muscle activity and muscle weakness can result in instability including pain in lumbopelvic region. The posterior oblique sling (POS) muscles contribute to dynamic lumbopelvic stability. In addition, POS are anatomically aligned with the trapezius muscle group according to shoulder positions. Objects: This study compared the electromyography (EMG) activity of POS and pelvic compensations during PHE with and without pre-activation of lower trapezius muscle (lowT). Methods: Sixteen healthy males were recruited. PHE was performed in randomized order: PHE with and without lowT pre-activation. Surface EMG signals were recorded for biceps femoris (BF), gluteus maximus (GM) (ipsilateral), lumbar multifidus (MF) (bilateral), and the lowT (contralateral). An electromagnetic tracking motion analysis was used to measure the angle of pelvic rotation and anterior tilting. Results: The ipsilateral GM and bilateral MF EMG amplitudes were greater during PHE with lowT pre-activation compared to PHE without lowT pre-activation (p<.05). The BF amplitude during PHE without lowT pre-activation was significantly greater than that during PHE with lowT pre-activation (p<.05). The angles of pelvic rotation and anterior tilting during PHE with lowT pre-activation were significantly smaller compared to PHE without lowT pre-activation (p<.05). Conclusion: PHE with lowT pre-activation, which is aligned with the POS, showed more increased MF and GM muscular activity with smaller lumbopelvic compensations in rotation and anterior tilting compared to PHE without lowT pre-activation.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.2
• /
• pp.140-147
• /
• 2021

Objective: The purpose of this study is to identify the mechanism of changes in maximum voluntary torque with the magnitude and duration of pre-activation torque during voluntary isometric knee extension. Method: 11 male subjects (age: 25.91±2.43 yrs., height: 173.12±3.51 cm, weight: 76.45±7.74 kg) participated in this study. The subjects were required to produce maximal voluntary isometric torque with a particular pre-activation torque condition. The properties of pre-activation torque consisted of the combinations of 1) three levels of magnitude, e.g., 32 Nm, 64 Nm, 96 Nm, and 2) two levels of duration, e.g., 1 sec, and 3 sec; thus, a total of six conditions were given to the subjects. The force and EMG data were measured using the force transducers and wireless EMG sensor, respectively. Results: The results showed that the maximum voluntary torque increased the most with relatively large and fast (96 Nm, 1 sec) pre-activation condition. Similarly, with relatively large and fast (96 Nm, 1 sec) preactivation, it was found that the integrated EMG (iEMG) of the agonist muscles increased, while no significant changes in the co-contraction of the antagonist muscles for the knee extension. Also, the effect of pre-activation conditions on the rate of torque development was not statistically significant. Conclusion: The current findings suggest that relatively larger in magnitude and shorter in duration as the properties of pre-activation lead to a larger magnitude of maximal voluntary torque, possibly due to the increased activity of the agonist muscles during knee extension.

• Reproductive and Developmental Biology
• /
• v.29 no.2
• /
• pp.117-120
• /
• 2005

This study was conducted to establish the optimal temperature condition before oocyte activation in B6m F1 mouse. In experiment 1, two embryo culture media (CZB vs KSOM) were evaluated for the development of activated mouse oocytes. Parthenogenetic embryos cultured in KSOM showed better blastocyst development than ones cultured in CZB $(56.2\%\;vs\;81.0\%\;p<0.01)$. Two-hour of pre-incubation before activation significantly reduced the number of hatched blastocysts in KSOM $(22.0\%\;versus\;8.8\%\;p<0.05)$. In experiment 2, recovered oocytes were pre-incubated at different temperature conditions before activation. The experimental groups were divided by 5 as follows. Group A: pre-incubation for 120 min at $37^{\circ}C$, Group B: pre-incubation at $37^{\circ}C$ for 90 min then at $25^{\circ}C$ for 30 min, Group C: pre-incubation at $37^{\circ}C$ for 60 min then at $25^{\circ}C$for 60 min, Group D: pre-incubation at $37^{\circ}C$ for 30 min then at $25^{\circ}C$ for 90 min, and Group E: pre-incubation at $25^{\circ}C$ for 120 min before activation. Group A $(67.6\%)$ and B $(66.7\%)$ showed better development to the blastocyst stage than other groups $(Group\;C:\;50.0\%\;Group \;D:\;49.2\%\;Group\;E:\;33.3\%,\;p<0.05)$. The present study indicates that the temperature before activation affects the development of B6D2 F1 mouse parthenogenetic oocytes and exposure to room temperature should be limited to 30-min when the oocytes are left in HEPES-buffered medium for micromanipulation.

• Analytical Science and Technology
• /
• v.18 no.4
• /
• pp.329-337
• /
• 2005

TL dating using pre-dose effect is concerned with the sensitivity increase of $110^{\circ}C$ TL peak in quartz following the pre-exposure of irradiation (pre-dose) in antiquity and heating to thermal activation temperature. Using the multiple activation (MA) method for determining an equivalent dose, the activation temperature was selected to $500^{\circ}C$ and the region of interest was selected from $85^{\circ}C$ to $105^{\circ}C$ on quartz sample from archaeological remains, roof-tile kiln. which was excavated at Chudong-Ri cultural site. It was concluded that the resultant date was determined to the age of $1725{\pm}25years$ AD (l ${\sigma}$ SD), which had more improved precision considering with e radiocarbon dates and was in good agreement with the age derived by archaeological assessment. Also it was concluded that the pre-dose dating should contribute significantly to future archaeological dating work in the range of the last 2000 years.

• Carbon letters
• /
• v.22
• /
• pp.70-80
• /
• 2017

Activated carbons (ACs) have been used as electrode materials of electric double-layer capacitors (EDLC) due to their high specific surface areas (SSA), stability, and ecological advantages. In order to make high-energy-density ACs for EDLC, petroleum pitch (PP) pre-carbonized at $500-1000^{\circ}C$ in $N_2$ gas for 1 h was used as the electrode material of the EDLC after KOH activation. As the pre-carbonization temperature increased, the SSA, pore volume and gravimetric capacitance tended to decrease, but the crystallinity and electrode density tended to increase, showing a maximum volumetric capacitance at a medium carbonization temperature. Therefore, it was possible to control the crystalline structure, SSA, and pore structure of AC by changing the pre-carbonization temperature. Because the electrode density increased with increasing of the pre-carbonization temperature, the highest volumetric capacitance of 28.4 F/cc was obtained from the PP pre-carbonized at $700^{\circ}C$, exhibiting a value over 150% of that of a commercial AC (MSP-20) for EDLC. Electrochemical activation was observed from the electrodes of PP as they were pre-carbonized at high temperatures above $700^{\circ}C$ and then activated by KOH. This process was found to have a significant effect on the specific capacitance and it was demonstrated that the higher charging voltage of EDLC was, the greater the electrochemical activation effect was.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.11
• /
• pp.550-556
• /
• 2001

The computerized cardiac analysis system, which acquires and analyzes the electrical activation signal propagating along the surface of the heart, is indispensible equipment for the open heart surgery and electrical cardiac study. In this paper, the design requirement and the electrical circuit analysis are performed to construct the multi-channel cardiac activation pre-amplifier necessary for a signal conditioning circuit. The general 64 channel configuration is expanded into 128 channels to enhance the spatial resolution on the mapped surface of the heart. The 128 channels pre-amplifier consists of input circuit, differential amplifier, right leg driven circuit and isolation part. It has distinct features; high voltage protection, leakage current limitation, isolation and the maximization of common mode rejection ratio with respect to the half-cell potential difference due to different electrode materials. The final pre-amplifier circuit is assembled with 8 boards, each of which composing of 16 channels.

• Reproductive and Developmental Biology
• /
• v.30 no.3
• /
• pp.175-180
• /
• 2006

This study was conducted to examine the effect of pre activation treatment and activation time of recipient cytoplasm on the development of bovine somatic cell nuclear transfer(NT) embryos. Donor cells were transferred and electrofused to enucleated oocytes before(pre-AC) or after activation(post-AC). Activation was induced with a combination of $Ca^{2+}$-ionophore(A23187) and DMAP. NT embryos were cultured in CR1aa containing 3 mg/ml BSA for 9 days. Some NT embryos were fixed at 0.5 to 2.5 hr after fusion(for post-AC) or activation(for pre-AC) for confocal microscopy. Developmental rate to the blastocyst stage was slightly high in the post-AC group(20.6%) compared to that of pre-AC group(15.3%). However, developmental speed of embryos in the pre-AC group was faster than that of embryos in the post-AC group. Development rates to the blastocyst stage were similar among different activation time before fusion(0.5,2 and 4 hr). The result of the present study suggests that development and nuclear morphology are affected f the activation status of the recipient cytoplasm before fusion.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.6
• /
• pp.259-266
• /
• 2000

Crash test data from different impact modes and threshold speeds were used to assess the effects of impact conditions on air bag electronic single point sensing (ESPS) activation requirements. The requirements are expressed in terms of the desired sensor activation time based on unbelted driver dummy kinematics. A crash discriminator pre-displacement is introduced to crash recognition algorithm to the ESPS. The new crash recognition algorithm named Velocity Energy Pre-displacement(VEPD) method is developed and the ESPS algorithm based on the VEPD technique is used to assess the ESPS system performance. It is shown that VEPD method correlates very well with desired sensor activation time and meets the activation requirement.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.346-349
• /
• 2002

High Power and high dose ion implantation is essentially needed to make power MOSFET devices based on SiC wafers, because the diffusivities of the impurities such as Al, N, p, B in SiC crystal are very low. In addition, it is needed high temperature annealing for electrical activation of the implanted species. Due to the very high annealing temperature, the surface morphology after electrical activation annealing becomes very rough. We have found the different surface morphologies between implanted and unimplanted region. The unimplanted region showed smoother surface morphology It implies that the damage induced by high energy ion implantation affects the roughening mechanism. Some parts of Si-C bonding are broken in the damaged layer, s\ulcorner the surface migration and sublimation become easy. Therefore the macrostep formation will be promoted. N-type 4H-SiC wafers, which were Al ion implanted at acceleration energy ranged from 30kev to 360kev, were activated at 1600$^{\circ}C$ for 30min. The pre-activation annealing for damage relaxation was performed at 1100-1500$^{\circ}C$ for 30min. The surface morphologies of pre-activation annealed and activation annealed were characterized by atomic force microscopy(AFM).

• Proceedings of the KSPS conference
• /
• 2003.05a
• /
• pp.97-100
• /
• 2003

The present study was planned to investigate the cortical activation correlated with producing morphologically complex Korean verbs by using. fMRI technique. In this study two derivational affixes and two inflectional affixes were selected: pre-final ending and final ending for inflectional affix and passive affix and causative affix for derivational affix. Two Experiment were conducted. The results of two Experiments suggest a possibility that process of pre-final ending is different from final ending.