• Management Science and Financial Engineering
• /
• v.5 no.2
• /
• pp.25-41
• /
• 1999

This paper generalizes the classic two-stage multicommodity distribution system design problem to the one that includes plant locations as well as distribution center locations. Accommodating plant location leads to subproblems which are mixed are mixed integer. Hence. no LP-type subproblems are avail-able, and therefore standard Benders decomposition no longer applies. We develop new solution method which combines an integer L-shaped method with Benders decomposition to suit the purpose, and pre-sent the test results.

• Journal of Applied Reliability
• /
• v.12 no.3
• /
• pp.131-138
• /
• 2012

A design of reliability qualification test based on performance distribution is developed. In general, the performance of an item degrades as the time goes by and the failure of an item occurs when the performance degradation reaches the pre-determined critical level. This article considers the reliability qualification test based on a more tightened critical value at the earlier stage to reduce the evaluation testing time and cost. A numerical example is provided to illustrate how to use the developed reliability qualification test.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.7 s.349
• /
• pp.1-13
• /
• 2006

In this paper, we introduce a novel key management scheme that is based on the key pre-distribution but provides the key re-distribution method, in order to manage keys for message encryption and authentication of lower-layer sensor nodes on hierarchical mobile sensor networks. The characteristics of our key management are as follows: First, the role of key management is distributed to aggregator nodes as well as a sink node, to overcome the weakness of centralized management. Second, a sink node generates keys using regression model, thus it stores only the information for calculating the keys using the key information received from nodes, but does not store the relationship between a node and a key, and the keys themselves. As the disadvantage of existing key pre-distributions, they do not support the key re-distribution after the deployment of nodes, and it is hard to extend the key information in the case that sensor nodes in the network enlarge. Thirdly, our mechanism provides the resilience to node capture(${\lambda}$-security), also provided by the existing key pre-distributions, and fourth offers the key freshness through key re-distribution, key distribution to mobile nodes, and scalability to make up for the weak points in the existing key pre-distributions. Fifth, our mechanism does not fix the relationship between a node and a key, thus supports the anonymity and untraceability of mobile nodes. Lastly, we compare ours with existing mechanisms, and verify our performance through the overhead analysis of communication, computation, and memory.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.4
• /
• pp.290-295
• /
• 2016

Socket-outlets and plugs are essential devices that supply electric power into user appliances. During plug-out operation of an engaged plug from the socket-outlet, the consistent arc between the plug and the socket-outlet could develop into heavy fires in DC systems but only a small spark in AC systems. This paper proposes a pre-/post-electrode method to prevent plugs and socket-outlets from melting by sustaining arc energy. To implement the proposed pre-/post-electrodes, an experimental plug is manufactured with two electrodes, in which a post resistance Rs is connected in between. This paper investigates the function of the post resistance Rs, in which the best value of the post resistance Rs is obtained through simulation and experiment.

• Journal of the Korean Society of Combustion
• /
• v.16 no.2
• /
• pp.40-46
• /
• 2011

The diesel pre-heater has being used in cabin heating and coolant heating of engine to reduce the engine warm up time for commercial vehicle. The pre-heaters are classified as diesel spray combustor and it forms diffusion flame. By using swirler, a recirculation flow of hot product gases is established near the fuel nozzle and it helps the maintaining of diffusion flame. The design difference of swirler can affect on reaction characteristics and temperature distribution inside pre-heater. The purpose of this study is the investigation of the effect of swirler configuration on combustion characteristics. To solve spray combustion problem, the Euler-Lagrange approach discrete model is used to track droplet trajectory and evaporation history. The PDF equilibrium model is used for chemical reaction model. These models are implemented into the FLUENT code.

• Steel and Composite Structures
• /
• v.21 no.5
• /
• pp.981-997
• /
• 2016

To avoid the cracks of cast-in-place concrete in shear pockets and seams in the traditional composite beam with precast decks, this paper proposed a new type of prefabricated steel truss-concrete composite beam (ab. PSTC beam) with pre-embedded shear studs (ab. PSS connector). To study the initial cracking load of concrete deck, the development and distribution laws of the cracks, 3 PSTC beams were tested under hogging moment. And the crack behavior of the deck was compared with traditional precast composite beam, which was assembled by shear pockets and cast-in-place joints. Results show that: (i) the initial crack appears on the deck, thus avoid the appearance of the cracks in the traditional shear pockets; (ii) the crack of the seam appears later than that of the deck, which verifies the reliability of epoxy cement mortar seam, thus solves the complex structure and easily crack behavior of the traditional cast-in-place joints; (iii) the development and the distribution laws of the cracks in PSTC beam are different from the conventional composite beam. Therefore, in the deduction of crack calculation theory, all the above factors should be considered.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.4
• /
• pp.573-582
• /
• 2016

The objective of the current study was to compare the execution of hygiene and safety management according to the characteristics of children's food service stations, with the ultimate objective of providing sanitary and safe food service to children. To this end, the study conducted surveys of 73 public and private pre-schools with fewer than 100 children in district A from July 30 to October 31 2015. The differences were evaluated by t-test and analysis of variance. The confidence and validity of the results were analyzed by six food ingredient and facilities management questions, three personal hygiene and facilities management questions, four environmental management questions, and five storage and treatment management questions; for a total of 18 questions. The cumulative distribution of the four factors was 61.569%, and the Cronbach's alpha was 0.821, which indicated that the results were reliable. The results revealed that public pre-schools (a) and home-based pre-schools (b) had different levels of food ingredient and facility management, but no differences in the number of cooks, number of children served, type of food distribution, and the existence of mass food service facilities. The results of the study may be used to develop hygiene and safety management manual and educational contents to promote the health of the children served.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.3
• /
• pp.157-166
• /
• 1997

The object of this study was invest, igat, ing the failure phenomenon in the contact zone of rcpnired concrete structures due to the external climate change(hygral transient condition). This study was carrie out by calculating the non-stationary moisture and stress distribution in the repaired concrete structures with the cement mortar. In this analysis, main variables were the overlay thickness (Do=0.5-2.5cm). and the pre-wetting time(tc= l-5days). and the cxtcrnal 1.~1ative humidity(Ho=50-80%). The results show that the minimum overlay thickness and the minimum pre-wetting time are necessary to k e ~ p compressive stresses in the contact zone for a relative humidity.

• Journal of Distribution Science
• /
• v.14 no.6
• /
• pp.27-37
• /
• 2016

Purpose - This study aims to suggest a developmental direction to small enterprisers who start their business. The developmental direction makes the small enterprisers more stable with providing the Business District Information System service, which offers the location and business area's information aimed at pre-enterprisers after analyzing its overcrowded index's current state and problems. Research design, data, and methodology - This research proposes the developmental direction for helping the pre-small enterprisers to have more stability through examining the Business District Information System's-operated by Small Enterprise and Market Service-overcrowded index's current state and problems. Results - This system has drawbacks about giving the start-up overcrowded index as follows: ① non-accurate consultative group for sharing the DB ② providing analysis information, not evaluation information ③ not to anticipate the changes of business types & the flow of business district and perceive the symptom data with providing predictive information. Conclusions - This system should be more publicized through the mass media for making it approachable with collecting the user's opinion and investigating customer satisfaction & the level of awareness.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.127-134
• /
• 2017

In this paper, we try to solve the frequency shortage due to the increase of LTE terminals and the traffic jam caused by the inefficient WiFi connection method. The proposed LTE-WIFI Vertical Handover method uses a pre-authentication method of the AP through LTE and a method of controlling the access AP of the terminal using the RADIUS server. Through the simulation, the proposed method shows that the access speed of the AP is improved by about 95% compared to the conventional connection method, and the connection speed is improved by about 18% compared to the conventional method. Providing seamless AP through pre-authentication system and improving wireless network speed through AP access distribution can solve LTE frequency shortage problem and improve wireless network usage satisfaction.