Browse > Article
http://dx.doi.org/10.12989/scs.2016.21.5.981

Cracking of a prefabricated steel truss-concrete composite beam with pre-embedded shear studs under hogging moment  

Gao, Yanmei (State Key Laboratory Cultivation Base of Mountain Bridge and Tunnel Engineering, Chongqing Jiaotong University)
Zhou, Zhixiang (State Key Laboratory Cultivation Base of Mountain Bridge and Tunnel Engineering, Chongqing Jiaotong University)
Liu, Dong (College of Civil Engineering, Chongqing Jiaotong University)
Wang, Yinhui (Ningbo Institute of Technology, Zhejiang University, School of Civil Engineering and Architecture)
Publication Information
Steel and Composite Structures / v.21, no.5, 2016 , pp. 981-997 More about this Journal
Abstract
To avoid the cracks of cast-in-place concrete in shear pockets and seams in the traditional composite beam with precast decks, this paper proposed a new type of prefabricated steel truss-concrete composite beam (ab. PSTC beam) with pre-embedded shear studs (ab. PSS connector). To study the initial cracking load of concrete deck, the development and distribution laws of the cracks, 3 PSTC beams were tested under hogging moment. And the crack behavior of the deck was compared with traditional precast composite beam, which was assembled by shear pockets and cast-in-place joints. Results show that: (i) the initial crack appears on the deck, thus avoid the appearance of the cracks in the traditional shear pockets; (ii) the crack of the seam appears later than that of the deck, which verifies the reliability of epoxy cement mortar seam, thus solves the complex structure and easily crack behavior of the traditional cast-in-place joints; (iii) the development and the distribution laws of the cracks in PSTC beam are different from the conventional composite beam. Therefore, in the deduction of crack calculation theory, all the above factors should be considered.
Keywords
Prefabricated Steel Truss-Concrete Composite Beam (PSTC beam); precast deck; Pre-embedded Shear Studs (PSS Connector); epoxy cement mortar seam; deck crack test;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Badie, S., Morgan Girgis, A.F., Tadros, M.K. and Sriboonma, K. (2011), "Full-scale testing for composite slab/beam systems made with extended stud spacing", J. Bridge Eng., 16(5), 653-661.   DOI
2 Chaudhary, S., Pendharkar, U. and Nagpal, A. (2009), "Control of creep and shrinkage effects in steel concrete composite bridges with precast decks", J. Bridge Eng., 14(5), 336-345.   DOI
3 Chen, Y.-T., Zhao, Y., West, J.S. and Walbridge, S. (2014), "Behavior of steel-precast composite girders with through-bolt shear connectors under static loading", J. Construct. Steel Res., 103, 168-178.   DOI
4 El-Lobody, E. and Lam, D. (2002), "Modelling of headed stud in steel-precast composite beams", Steel Compos. Struct., Int. J., 2(5), 355-378.   DOI
5 GB50017 (2003), "Code for design steel structures", Ministry Housing and Urban-Rural Development of the People's Republic of China, Beijing, China.
6 Joergensen, H.B. (2014), "Strength of loop connections between precast concrete elements", Ph.D. Thesis; University of Southern Denmark, Denmark.
7 Joergensen, H.B. and Hoang, L.C. (2013), "Tests and limit analysis of loop connections between precast concrete elements loaded in tension", Eng. Struct., 52, 558-569.   DOI
8 Joergensen, H.B. and Hoang, L.C. (2015), "Strength of loop connections between precast bridge decks loaded in combined tension and bending", Struct. Eng. Int., 25(1), pp. 71-80.   DOI
9 Ju, Y., Chun, S. and Kim, S. (2009), "Flexural test of a composite beam using asymmetric steel section with web openings", J. Struct. Eng., 135(4), 448-458.   DOI
10 Li, C., Zhou, Z., Su, C. and Fan, L. (2015), "Experimental study of prefabricated composite shear studs", Bridge Construct., 45(5), 60-65.
11 Nie, J. (2005), The Structure of Steel-Concrete Composite Beam, Science Press, Beijing, China.
12 Nie, J., Li, F., Fan, J., Zhang, X. and Diao, S. (2011), "Experimental study on flexural behavior of composite beams with different styles of concrete flange different styles of concrete flange", J. Highway Transport. Res. Develop., (English Ed.), 5, 30-35.   DOI
13 Papastergiou, D. and Lebet, J.P. (2014), "Design and experimental verification of an innovative steel-concrete composite beam", J. Construct. Steel Res., 93, 9-19.   DOI
14 Shim, C.-S. and Chang, S.-P. (2003), "Cracking of continuous composite beams with precast decks", J. Construct. Steel Res., 59(2), 201-214.   DOI
15 Ryu, S.H. (2010), "Study on behavior of T-section modular composite profiled beams", Steel Compos. Struct., Int. J., 10(5), 457-473.   DOI
16 Ryu, H.K. and Chang, S.P. (2005), "Crack control of a steel and concrete composite plate girder with prefabricated slabs under hogging moments", Eng. Struct., 27(11), 1613-1624.   DOI
17 Ryu, H.K. and Shim, C.S. (2004), "Inelastic behavior of externally prestressed continuous composite boxgirder bridge with prefabricated slabs", J. Construct. Steel Res., 60(7), 989-1005.   DOI
18 Shim, C.S., Chung, C.H., Kim, I.K. and Kim, Y.J. (2010), "Development and application of precast slabs for composite bridges", Struct. Eng. Int., 20(2), 126-133.
19 Su, Q., Yang, G. and Wu, C. (2012a), "Experiments on concrete cracking of steel-concrete composite box girder", China J. Highway Transport, 5(9), 74-81.
20 Su, Q., Yang, G. and Wu, C. (2012b), "Experimental study on mechanical behavior of continuous composite girder with prefabricate prestressed concrete slab", J. Tongji Univ. (Natural Science), 7(7), 997-1002.
21 Sun, Q., Yang, Y., Fan, J., Zhang, Y. and Bai, Y. (2014), "Effect of longitudinal reinforcement and prestressing on stiffness of composite beams under hogging moments", J. Construct. Steel Res., 100, 1-11.   DOI
22 Xiang, H. and Zhou, Z. (2012), "Performance experiment and design theory research of fabricated steel box-prestressed concrete composite beams", Chongqing Jiaotong University.