• Journal of Engineering Education Research
• /
• v.18 no.4
• /
• pp.3-12
• /
• 2015

The purpose of this study was to develop a pre-training program of engineering college students for maximizing the effectiveness of internship or field training. To pursue this goal, literature review was conducted for data collection about college and corporate pre-training program for internship or field training and pre-training program(draft) was proposed. A questionnaire survey was conducted with engineering professors, students and graduates to identify the needs for pre-training program(draft) for internship or field training. Based on the results, the contents of pre-training program for internship or field training were composed of basic liberal arts, basic competency, real information related with corporation or job, and information exchange network. And key consideration for operating the pre-training program for internship or field training were proposed with the management department, regulation for the obligatory participation, meaningful organizing content, feedback of needs.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.5
• /
• pp.655-659
• /
• 2005

Pre-filter system that was consisted of wasted-tire, non-woven fabrics, and sponge was developed as a primary treatment process prior to rainwater reservation or a pre-treatment process of rainwater reuse system for reclamation. By using this system, SS concentration, TOC, COD, and turbidity could decreased by 86.7%, 62.6%, 69.1% and 66.5%, respectively. From the results of particle size distribution of treated water, the particles over than $30{\mu}m$ of diameter were completely removed by pre-filter system. But 90% of particles less than $20{\mu}m$ of diameter were passed through pre-filter. Optimal depth of wasted-tire and non-woven fabrics were 15cm and 2.4cm, respectively. Pre-filter system was considered as an effective alternative for pre-treatment of rainwater including non-point pollutants and it could be also applied for the treatment of combined sewer overflow (CSO).

• Korean Journal of Human Ecology
• /
• v.17 no.2
• /
• pp.181-190
• /
• 2008

The study aims to find out and examine the variables that make a difference between pre-service teachers' child care efficacy (CCE) and general self-efficacy (GSE). The subjects were 232 pre-service child care teachers going to an educational institution and a college. The results are as follows. First, the variables of "age", "teacher training facilities", "field experience in child care centers", and "experience of child care" and "paraprofessional teachers" are important variables in pre-service teachers' CCE. Second, the variables of "age", "level of education", "teacher training facilities", "field experience in child care center", and "experience of child care or paraprofessional teachers" significantly affect the pre-service teachers' GSE. Third, the "age" variable is essential in explaining pre-service teachers' GSE. The Pre-service teachers' GSE is significantly related to the pre-service teachers' CCE.

• Journal of The Korean Association For Science Education
• /
• v.32 no.3
• /
• pp.415-427
• /
• 2012

In this study, we conducted preliminary survey, diagnostic test and in-depth interview in order to study Korean pre-service chemistry teachers' understanding on entropy and investigate how Korean pre-service chemistry teachers deal with the natural phenomenon which is related to entropy conceptions. Firstly, as a result of the preliminary survey, it was found that pre-service chemistry teachers strongly recognized entropy as the degree of disorder. Secondly, the diagnostic test showed pre-service chemistry teachers were mostly confused about whether the entropy of the universe increases during a spontaneous change, and they had a tendency to interpret the natural phenomenon related to entropy change as the change of disorder. Finally, during in-depth interview, after we explained entropy change in all diagnostic test questions with the concept of microstate, pre-service chemistry teachers revealed a better understanding about entropy. Through this research, pre-service chemistry teachers had an opportunity to reflect on their deficiencies of entropy conceptions, which will ultimately help students to approach the concept of entropy more correctly.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.33-38
• /
• 1995

In this study, unsistered, pre-sintered and sintered low purity alumina ceramics were machined with various tools to clarify the machniability, the optimum tool materials and the optimum tool materials and the optimum cutting conditions. The maon conclusions obtained were as follows. (1) Machined withalloy steel tool, the machinabilty of te pre-sintered ceramics becomes better with the decrease of pre-sintering temperature, but that of unsintered ceramics(white body) was extremely poor. (2) In the case of carbide tool K01, the tool life in machining white body was the longest, and the machinabilty of pre-sintered ceramics becomes poorer with the increase of the pre-sintering temperature. (3) In the case of ceramic tool, the 10000-1100 .deg. C pre-sintered ceramics showed te best machinability within a certain cutting speed range. So far as dry machining, the above combination and conditions showed the highest productivity. (4) When the pre-sintered ceramics were wet machined withsintered diamond tool, the tool life becomes extremelylong, and higher cutting speed can be can be used than in the case offull-sintered ceramics. The productivity of wet cutting is much higher than that ofdry cutting.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.3
• /
• pp.219-223
• /
• 2009

This paper prescribed the structural integrity of the API 5L X65 pipeline subjected to tensile pre-strain. The effects of pre-strain on the mechanical properties of API 5L X65 pipe were substantially investigated through a variety of the experimental procedures. Axial tensile pre-strain of 1.5, 5 and 10% was applied to plate-type tensile specimens cut from the pipe body prior to mechanical testing. Tensile test revealed that yield strength and tensile strength were increased with increasing tensile pre-strain. The increasing rate of the yield strength owing to the pre-strain is greater than that of the tensile strength. However, the pre-strain up to 5% had a little effect on the decreasing of the fracture toughness. The structural integrity of the API 5L X65 pipeline subjected to large plastic deformation was evaluated through the fitness-for service code.

• Korean Journal of Acupuncture
• /
• v.26 no.3
• /
• pp.121-132
• /
• 2009

Objectives : The purpose of this study is to review the prevention of pre- or syncope by acupuncture of "Geum Chim Mae Hwa Si Cho" Methods : 1. The authors reviewed "Geum Chim Mae Hwa Si Cho" and several literatures related with pre- or syncope by acupuncture. 2. We investigated the causes and signs of pre- or syncope by acupuncture, and the mechanism and clinical usefulness of the prevention of pre- or syncope by acupuncture. Results and Conclusions : 1. Pre- or syncope by acupuncture is a kind of Myung Hyun phenomenon resulted from patients' failure of reception of acupuncture treatment. 2. "Geum Chim Mae Hwa Si Cho" said not to be confused by pre- or syncope, and suggested 8 items for prevention of pre- or syncope by acupuncture. 3. "Geum Chim Mae Hwa Si Cho" especially argued to give doctor's whole mind to patients, and relax the mental tension of patients. 4. Yang Myoung meridian occupies the biggest part in acupoints used for the first aid.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.6
• /
• pp.407-416
• /
• 2013

Acting an important risk management tool for main contractors, pre-qualification has served a key marketing tool for subcontractors in various industries. Current industrial environment has required the time intensive pre-qualification ability to small and medium-size subcontractors as a matter of competitive business. In order to support the subcontractors, this paper proposes a database model for pre-qualification management system (PQMS) that automates the pre-qualification process by using information technologies. The modeling process consists of specifications for its requirements, functional modules, and a database model for the PQMS.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.370-373
• /
• 1999

Si direct bonding (SDB) technology is very attractive for both Si-on-insulator(SOI) electric devices and MEMS applications because of its stress free structure and stability. This paper presents on- pre treatment conditions in Si wafer direct bonding, The paper resents on pre-bonding according to HF pre-treatment conditions in Si wafer direct bonding. The characteristics of bonded sample were measured under different bonding conditions of HF concentration, applied pressure and annealing temperature(200~ 100$0^{\circ}C$) after pre-bonding. The bonding strength was evaluated by tensile strength method. The bonded interface and the void were analyzed by using SEM and IR camera, respectively, Components existed in the interlayer were analyzed by using FT-IR. The bond strength depends on the HF pre-treatment condition before pre-bonding(Min 2.4kgf/$\textrm{cm}^2$~ Max : 14.kgf/$\textrm{cm}^2$)

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.11a
• /
• pp.205-208
• /
• 2009

The purpose of this study is to apply the process model of the pre-design stage to CPLM(Construction Project Life-cycle Management). Life-cycle consists of 4 stage; Pre-design, Design, Construction, Maintenance. Each stage has organic relations between front and rear stage. Therefore it is important to manage and use the information data of each stage. But these data are not carried to the next stage smoothly, especially at the pre-design stage. It is even vague to define the process of the pre-design stage. To carry and share the information well, this study defines Pre-design stage process and CPLM at first, VA-Cityplanner which is the development system of the pre-design process model is applied to CPLM for the smooth current of the data between participants.