• The Journal of Information Technology
• /
• v.6 no.1
• /
• pp.71-84
• /
• 2003

In this paper, it is presented the efficient system for data recognition using the proposed binary code images. The proposed algorithm finds the position of binary image. Through the process of the block region classification, it is classified each block with the edge region using the value of gray level only. Each block region is divided horizontal and vertical edge region. If horizontal edge region blocks are classified over six blocks in any region, the proposed algorithm should search the vertical edge region in the start point of the horizontal edge region. If vertical edge region blocks were found over ten blocks in vertical region, the code image would found. Practical code region is acquired from the rate of the total edge region that is computed from the binary image that is processed with the average value. In case of the wrong rate, it is restarted the code search in the point after start point and the total process is followed. It has a short time than the before process time because it had classified block information. The block processing is faster thant the total process. The proposed system acquires the image from the digital camera and makes binary image from the acquired image. Finally, the proposed system extracts various characters from the binary image.

• Steel and Composite Structures
• /
• v.30 no.4
• /
• pp.393-403
• /
• 2019

Cold-formed steel (CFS) has a great potential to meet the global challenge of fast-track and durable construction. CFS members undergo large buckling instabilities due to their small wall thickness. CFS beams with corrugated webs have shown great resistance towards web buckling under flexure, when compared to the conventional I-sections. However, the magnitude of global imperfections significantly affects the performance of CFS members. This paper presents the first attempt made to experimentally study the effect of global imperfections on the structural efficiency of various strengthening schemes implemented in CFS beams with corrugated webs. Different strengthening schemes were adopted for two types of beams, one with large global imperfections and the other with small imperfections. Strength and stiffness characteristics of the beams were used to evaluate the structural efficiency of the various strengthening schemes adopted. Six tests were performed with simply supported end conditions, under four-point loading conditions. The load vs. mid-span displacement response, failure loads and modes of failure of the test specimens were investigated. The test results would compensate the lack of experimental data in this area of research and would help in developing numerical models for extensive studies for the development of necessary guidelines on the same. Strengthening schemes assisted in enhancing the member performance significantly, both in terms of strength and stiffness. Hence, providing an economic and time saving solution to such practical structural engineering problems.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.16 no.3
• /
• pp.157-164
• /
• 2006

Information is playing a key role in sufficing the needs of individual members of the society in today's rapidly changing environment. Especially, the cases of illegal gathering of privacy information will increase and the leakage of privacy information will grow as the individual activities in the ubiquitous computing environment. In this paper, we suggested the privacy framework in order to make design and implementation of secure and effective privacy management system. Ant we also introduced the methodology which is represent to 5 specific stages in order to suggest to the privacy system development guideline from the standpoints of the privacy system operator or developer. Especially, we tried to determine whether the suggested methodology can be effectively used in the real computing environment or not by making necessary investments in management (privacy policy) and technical (system architecture) sides. We believe that the privacy framework and methodology introduced in this research can be utilized to suggest new approach for showing direction from the privacy protection perspective, which is becoming more important in ubiquitous environments, and practical application rather than providing conceptual explanation from the views of engineer or developer.

• International Journal of Computer Science & Network Security
• /
• v.22 no.7
• /
• pp.443-450
• /
• 2022

The method of studying 3D-technologies abroad and in Ukraine is considered. The analysis of educational resources and experience of use of the equipment in branch is carried out. The didactic principles of the educational process for 3D-printing specialists are determined. The use of FDM technology and the ability to minimize the occurrence of defects in the future have been studied. An analysis of the international experience of the educational process of relevant specialists in the field. The content of training for 3D printing specialists has been developed. The experience of using 3D-technologies is described and the list of recommendations for elimination of defects during production of products by means of additive technologies is made. The recommendations will be useful not only for beginners, but also for experienced professionals in additive technologies. The need to study such experience is the main condition for the development of enterprises in Ukraine that plan to automate their own production. A 3D printing engineer must know the basics of economics and marketing, because his responsibilities include optimizing workflows to reduce the cost and speed up printing. Therefore, the knowledge gained from practical experience presented and in building for learning 3D printing engineers by the authors will be important.

• Journal of Practical Engineering Education
• /
• v.16 no.1_spc
• /
• pp.21-31
• /
• 2024

This study focused on the development of an AI essay tool for assessing writing-communication competence using ChatGPT. During the development process, the interaction between content expert and technical expert was emphasized to explore the fusion of IT and humanities and social sciences. Through close communication and interaction between the content and technical experts, they incorporated scoring criteria for writing-communication competence and developed an AI essay test tool that provides scores and feedback in the appropriateness of content, effectiveness of organization, and accuracy of grammar. This process revealed how content and technology combine and presented considerations for future fusion researchers, including technical experts in generative AI assessment tools.

• Journal of Engineering Education Research
• /
• v.8 no.1
• /
• pp.84-98
• /
• 2005

This study is on improving the general engineering education for enhancing the quality of engineers at a local engineering school in which the students are not highly qualified for engineering education. Based on the analysis on the current engineering education by asking questions to professors, students and alumni of Hongik College of Science and Engineering, we have set the basic educational philosophy as educating practical engineers and have decided the goals of basic engineering education as changing to student oriented education, enhancing the field adaptation capability, improving the problem solving ability and introducing engineering design courses. For achieving the foregoing goals, we have changed several basic engineering courses. Mathematics, science courses, computer related courses, English, communication skill related courses are strengthened, but general college education courses are reduced. We also have encouraged students to participate the classes actively and study efficiently, think logically and creatively. For the operational details, we have tried to impose less courses to freshmen and sophomores, to impose the prerequisite courses, to activate summer and winter schools. Finally, we have tried to find the ways to support continuous improvement on the basic engineering education.

• Journal of Cadastre & Land InformatiX
• /
• v.53 no.1
• /
• pp.5-20
• /
• 2023

The government is operating a course evaluation-type qualification system for the purpose of overcoming the limitations of the test-type qualification system and cultivating talents with practical skills applicable to related industries. However, there is a part that does not match the purpose of the course evaluation qualification system by educating competency units in the field of surveying rather than the field of cadastral field in the education and training course of the course evaluation qualification. Therefore, this study closely analyzed the course evaluation qualification system in the cadastral field and suggested improvement plans accordingly. First, NCS in the cadastral field has not been supplemented or developed since its development in 2014, and there are many parts that do not conform to the current laws, so supplementary development is necessary. Second, It was proposed to improve the optional competency unit in the field of surveying to the NCS competency unit in the cadastral field. In addition, if the 12 competency units of the current NCS in the cadastral field are designated as essential competency units and education and training are operated, it will be possible to foster working-level talents with sufficient competency at the cadastral engineer level. However, for practical system operation and application, supplementation and development of NCS in the cadastral field, which is used for education and training of the course evaluation qualification system, must be preceded.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.2
• /
• pp.89-102
• /
• 2015

This study contemplates the tendency of the examination questions for History of Korean Landscape Architecture. The study targets the questions of 'Landscape Architecture History' which has been set in the written test for National Qualification Test of a landscape engineer for recent 10 years from 2005 to 2014 and derives analyzable items based on the guidelines of question-setting presented by Human Resources Development Service of Korea. The results of the study are drawn as follows. First, among 5 areas composing Landscape History, the proportion of Korean Landscape questions is getting increased while that of Western ones is decreasing. Second, about 30 traditional trees and 11 types of traditional landscape elements including traditional facilities were shown in Korean Landscape questions. Besides, history, geographic, practical science, horticulture, anthology books and the 25 tradition landscape-related historic documents categorized as the garden painting data were found. And the kings from ancient era to Choseon Dynasty who were associated with the time of palace garden building, the builders or owners of the villas, the authors of the document and Chinese scholars also appeared. Third, there were no the questions of prehistoric times and Balhae Kingdom, whereas those of Choseon Dynasty were dominantly focused. Among the traditional sites of Choseon Dynasty, Byeolseo(villas) were set most, followed by Dosung or Gung-gweol(castle towns or palaces), houses, Nu Jeong Dea(pavilions) and Seowon(local schools) in order. Nak-an eupseong and Yong-ju sa were the only cases for a castle town and a temple each. Fourth, being associated with tradition spaces, the questions asked for understanding the detailed contents of time of sites' construction, builders, location features, building structures, ground plan types and the components s of garden. In addition, as a result of checking whether traditional landscape sites were shown in the set questions in 9 Korean Landscape textbooks, Dongchundang, Pungamjeonsa, Simgogseowon did not appeared. As a result of reviewing the tendency of the examination questions for History of Korean Landscape Architecture, the questions which ask minor facts without generality and which include difficult information and site uncomprehended in the textbook should be reconsidered.

• Journal of Intelligence and Information Systems
• /
• v.14 no.2
• /
• pp.179-192
• /
• 2008

This case study shows constructing the knowledge-based system using a rule-based approach for detecting illegal transactions regarding money laundering in the Korea Financial Intelligence Unit (KoFIU). To better manage the explosive increment of low risk suspicious transactions reporting from financial institutions, the adoption of a knowledge-based system in the KoFIU is essential. Also since different types of information from various organizations are converged into the KoFIU, constructing a knowledge-based system for practical use and data management regarding money laundering is definitely required. The success of the financial information system largely depends on how well we can build the knowledge-base for the context. Therefore we designed and constructed the knowledge-based system for anti-money laundering by committing domain experts of each specific financial industry co-worked with a knowledge engineer. The outcome of the knowledge base implementation, measured by the empirical ratio of Suspicious Transaction Reports (STRs) reported to law enforcements, shows that the knowledge-based system is filtering STRs in the primary analysis step efficiently, and so has made great contribution to improve efficiency and effectiveness of the analysis process. It can be said that establishing the foundation of the knowledge base under the entire framework of the knowledge-based system for consideration of knowledge creation and management is indeed valuable.

• Journal of the Korean Professional Engineers Association
• /
• v.20 no.3
• /
• pp.15-25
• /
• 1987

Statistical control charts are useful tools to monitor and control the manufacturing processes and are widely used in most Korean industries. Many Korean companies, however, do not always obtain desired results from the traditional control charts by Shewhart such as the X-chart, X-chart, X-chart, etc. This is partly because the quality charterstics of the process are not distributed normally but are skewed due to the intermittent production, small lot size, etc. In Shewhart X-chart, which is the most widely used one in Korea, such skewed distributions make the plots to be inclined below or above the central line or outside the control limits although no assignable causes can be found. To overcome such shortcomings in nonnormally distributed processes, a distribution-free type of confidence interval can be used, which should be based on order statistics. This thesis is concerned with the design of control chart based on a sample median which is easy to use in practical situation and therefore properties for nonnormal distributions may be easily analyzed. Control limits and central lines are given for tile more famous nonnormal distributions, such as Gamma, Beta, Lognormal, Weibull, Pareto, Truncated-normal distributions. Robustness of the proposed median control chart is compared with that of the X-chart, the former tends to be superior to the latter as the probability distribution of the process becomes more skewed. The average run length to detect the assignable cause is also compared when the process has a Normal or a Gamma distribution for which the properties of X are easy to verify, the proposed chart is slightly worse than the X-chart for the normally distributed product but much better for Gamma-distributed products. Average Run Lengths of the other distributions are also computed. To use the proposed control chart, the probability distribution of the process should be known or estimated. If it is not possible, the results of comparison of the robustness force us to use the proposed median control chart based on a normal distribution. To estimate the distribution of the process, Sturge's formula is used to graph the histogram and the method of probability plotting, $X^2$-goodness of fit test and Kolmogorov-Smirnov test, are discussed with real case examples. A comparison of the propose4 median chart and the X chart was also performed with these examples and the median chart turned out to be superior to the X-chart.