• Journal of Information Science Theory and Practice
• /
• v.5 no.3
• /
• pp.61-70
• /
• 2017

This study investigated the use of e-journals by health researchers in the Nigerian Institute of Medical Research (NIMR). A descriptive survey method was adopted for the study and a questionnaire was used for data collection. The study population was comprised of fifty-four (54) respondents who are health researchers in the institute. The data collected were presented and analyzed using tables, frequency distribution, simple percentages, and charts. The result of the study revealed that all the respondents are aware of the availability of e-journals and attest to making use of them. The study revealed that electronic journals were mostly used for the purpose of conducting research work and the PDF format was preferred for downloading e-journals. However, it was observed that low Internet connectivity and intermittent electricity supply constitute a major obstacle to the use of e-journals. The study, therefore, recommended that the institute's management invest more resources on network connectivity, particularly its bandwidth, and ensure reliable power supply.

• Journal of Information Technology Applications and Management
• /
• v.12 no.4
• /
• pp.93-104
• /
• 2005

Recently, RFID/USN is one of fundamental technologies in information and communications networks. Low-Rate WPAN, IEEE802.15.4 is a low-cost communication network that allows wireless connectivity in applications with limited Power and relaxed throughput requirements. Its applications are building automation, personal healthcare, industrial control, consumer electronics, and so on. Some applications require location information. Of course location awareness is useful to improve usability of data Low-Rate WPAN Is regarded as a key specification of the sensor network with the characteristics of wireless communication, computing, energy scavenging, self-networking, and etc. Unfortunately ZigBee alliance propose a lot of applications based on location aware technologies, but the specification and low-rate WPAN devices don't support anything about location-based services. RSSI ( Received Signal Strength indication) is for energy detection to associate, channel selection, and etc. RSSI is used to find the location of a potable device in WLAN. In this paper we studied indoor location awareness using vector matching of RSSI in low-Rate wireless PAN. We analyzed the characteristics of RSSI according to distance and experimented location awareness. We implemented sensor nodes with different shapes and configured the sensor network for the location awareness with 4 fixed nodes and a mobile node. We try to contribute developing location awareness method using RSSI in 3-dimension space.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.4
• /
• pp.665-683
• /
• 2011

Wireless sensor networks (WSN) consist of a large amount of sensor nodes distributed in a certain region. Due to the limited battery power of a sensor node, lots of energy-efficient schemes have been studied. Clustering is primarily used for energy efficiency purpose. However, clustering in WSNs faces several unattained issues, such as ensuring connectivity and scheduling inter-cluster transmissions. In this paper, we propose a location-based spiral clustering (LBSC) algorithm for improving connectivity and avoiding inter-cluster collisions. It also provides reliable location aware routing paths from all cluster heads to a sink node during cluster formation. Proposed algorithm can simultaneously make clusters in four spiral directions from the center of sensor field by using the location information and residual energy level of neighbor sensor nodes. Three logical addresses are used for categorizing the clusters into four global groups and scheduling the intra- and inter-cluster transmission time for each cluster. We evaluated the performance with simulations and compared it with other algorithms.

• Korean Journal of Health Education and Promotion
• /
• v.16 no.1
• /
• pp.187-201
• /
• 1999

A purpose of this study is to provide Rousseau's health theory and health education in 『Emil』. Though Rousseau was not so much a doctor as a philosopher, he was good at health care and health education. After he had thought over healthy children for 20 years, he had written 『Emil』 for 3 years. His health theory was included in the book. He was aware of the importance of mother's milk, clothes, and physical health. Especially, he told mothers to rear a child at the breast. He understood thoroughly the demerits of medicines, and made no account of doctors and medicines. But on the other hand, He emphasized natural healing power in human body. He thought that one oneself was a physician. He thought highly of inner healing. He thought that only hygiene of medicine was useful to mankind. He prescribed that hygiene was a kind of ethics education. Therefore, his hygiene was associated with mental health and moral evaluation. Because many years have passed, today we can not accept all his assertions. But we need to stress preventive medicines, spontaneous healing, and self-care in health education.

• The Journal of the Korea Contents Association
• /
• v.14 no.5
• /
• pp.18-29
• /
• 2014

was somewhat of a turning point for Godard, allowing the Novelle Vague auteur to address for the first time the current political climate of the world in one of his film, and this film is a film of constant questioning and is, in the truest sense, a 'talking film'. In this paper, I attempt to analyse the sound of this film to interpret the complicated sound structure in . Godard was aware of the power of sound and experimented diverse methods such as 'direct sound', interviewing using the effect of on-sound and off-sound, multiple narration, reading a text aloud, sound effect and music which are controled and selected by himself in this film. , with its largely improvised dialogue, was a work of journalism which was recorded a generation of Marx Coca-Cola.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.2
• /
• pp.5-9
• /
• 2015

Thermal management becomes serious in 3D stacked IC because of higher heat flux, increased power generation, extreme hot spot, etc. In this paper, we reviewed the recent developments of thermal management for 3D stacked IC which is a promising candidate to keep Moore's law continue. According to experimental and numerical simulation results, Cu TSV affected heat dissipation in a thin chip due to its high thermal conductivity and could be used as an efficient heat dissipation path. Other parameters like bumps, gap filling material also had effects on heat transfer between stacked ICs. Thermal aware circuit design was briefly discussed as well.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.1
• /
• pp.40-48
• /
• 2005

A hydraulic hose is an important part of the hydraulic system which transmits power using pressurized fluids. It allows relative motion between components at each end of the hose assembly, and it is much easier to route a hose assembly than it is to bend and install a rigid tubing assembly. Unnecessary loads, which drop the hose's pressure capability and shorten service life, depend on a hose-routing. Therefore, the Hydraulic system designers must be aware to consider unnecessary load does not affect the here. For this consideration in an early stage of the design process, CAD system must support the hose assembly routing design function which is to generate routing path and design fitting angle properly. This paper proposes 2 methods. One is to generate curves that are similar to routing paths of the real hose assembly using the energy minimization method and the optimization method. The other is to design fitting angles that are important design elements of a hose assembly using the Parallel Transport Frame. To implement the proposed methods above, commercial CAD software, CATIA has been integrated with our program.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.159-165
• /
• 2017

As increasing the number of the elderly people, various IT-based home systems for the elderly are actively studied. However, while most systems for the elderly focus on systems detecting emergency cases, systems considering energy reduction in the elderly housing are rarely found. In fact, the systems for the elderly housing consumes rather more electric power for their functions. In this paper, a emergency monitoring system including the functions to reduce energy useage is studied and it is implemented. Though the system, we can achieve both of future-oriented functions for the aged and green society, which are emergency monitoring and energy reduction.

• Journal of Computing Science and Engineering
• /
• v.4 no.3
• /
• pp.189-206
• /
• 2010

It is generally accepted that dynamic voltage scaling (DVS) is one of the most effective techniques of energy minimization for real-time applications in embedded system design. The effectiveness comes from the fact that the amount of energy consumption is quadractically proportional to the voltage applied to the processor. The penalty is the execution delay, which is linearly and inversely proportional to the voltage. According to the granularity of tasks to which voltage scaling is applied, the DVS problem is divided into two subproblems: inter-task DVS problem, in which the determination of the voltage is carried out on a task-by-task basis and the voltage assigned to the task is unchanged during the whole execution of the task, and intra-task DVS problem, in which the operating voltage of a task is dynamically adjusted according to the execution behavior to reflect the changes of the required number of cycles to finish the task before the deadline. Frequent voltage transitions may cause an adverse effect on energy minimization due to the increase of the overhead of transition time and energy. In addition, DVS needs to be carefully applied so that the dynamically varying chip temperature should not exceed a certain threshold because a drastic increase of chip temperature is highly likely to cause system function failure. This paper reviews representative works on the theoretical solutions to DVS problems regarding inter-task DVS, intra-task DVS, voltage transition, and thermal-aware DVS.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.854-857
• /
• 2008

Wireless sensor consists of an internal power source which has limited life time. Several MAC protocols have exploited scheduled sleep/listen cycles to conserve energy in sensor networks. Duty cycle is a user-adjustable parameter in low duty cycle MAC protocols, which determines the length of the sleep period in a frame. The sire of duty cycle has direct effect on the Performance of MAC Protocols. In this Paper, we simulated TEEM (A Traffic Aware, Energy Efficient MAC) and S-MAC in NS-2 with different duty cycle values and analyze how duty-cycle effects on the performance and energy consumption of both the protocols.