• Asian-Australasian Journal of Animal Sciences
• /
• 제24권12호
• /
• pp.1651-1659
• /
• 2011

This study was conducted to detect quantitative trait loci (QTL) for thirteen growth and meat quality traits in pigs by combing QTL experimental populations. Two F2 reference populations that were sired by Korea native pig (KNP) and dammed by Landrace (LN) or Yorkshire (YK) were generated to construct linkage maps using 123 genetic markers (mostly microsatellites) and to perform QTL analysis on porcine chromosomes (SSCs) 1, 2, 3, 6, 7, 8, 9, 11, 13, 14, and 15. A set of line-cross models was applied to detect QTL, and a series of lack-of-fit tests between the models was used to characterize inheritance mode of QTL. A total of 23, 11 and 19 QTL were detected at 5% chromosome-wise level for the data sets of KNP${\times}$LN, KNP${\times}$YK cross and joint sets of the two cross populations, respectively. With the joint data, two Mendelian expressed QTL for live weight and cooking loss were detected on SSC3 and SSC15 at 1% chromosome-wise level, respectively. Another Mendelian expressed QTL was detected for CIE a on SSC7 at 5% genome-wise level. Our results suggest that QTL analysis by combining data from two QTL populations increase power for QTL detection, which could provide more accurate genetic information in subsequent marker-assisted selection.

• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2609-2615
• /
• 2013

A series of fluorene-carbazole copolymers containing the pendant phosphor chromophore $Ir(absn)_2(acac)$ (absn: 2-(1-naphthyl)benzothiazole; acac: acetylacetone) were designed and synthesized via Yamamoto coupling. In the film state, these copolymers exhibited absorption and emission peaks at approximately 389 and 426 nm, respectively, which originated from the fluorene backbone. However, in electroluminescent (EL) devices, a significantly red-shifted emission at approximately 611 nm was observed, which was attributed to the pendant iridium(III) complex. Using these copolymers as a single emission layer, polymer light-emitting devices with ITO/PEDOT:PSS/polymer:DNTPD/TmPyPb/LiF/Al configurations exhibited a saturated red emission at 611 nm. The attached iridium(III) complex had a significant effect on the EL performance. A maximum luminous efficiency of 0.85 cd/A, maximum external quantum efficiency of 0.77, maximum power efficiency of 0.48 lm/W, and maximum luminance of 883 $cd/m^2$ were achieved from a device fabricated with the copolymer containing the iridium(III) complex in a 2% molar ratio.

• 대한전자공학회논문지SD
• /
• 제39권3호
• /
• pp.9-19
• /
• 2002

본 논문에서는 thermionic emission 모델을 이용하여 SCH 양자우물 레이저 다이오드에 대한 L-I-V특성을 해석적으로 도출하였다. SCH의 bulk 캐리어와 양자우물 속박 캐리어의 관계를 도출하였고, 주입된 전류를 각 영역에서의 캐리어 재결합을 고려한 전류 연속 방정식을 만족하도록 하였다. 또한, high level injection과 전하 중성 조건하에 ambipolar 확산 방정식을 이용하여 캐리어 분포를 고찰하였다. 위 해석적인 모델을 이용하여 계산한 결과, 클래딩 영역의 전위장벽 변화가 전류 전압 특성 변화의 주요 원인으로 나타났다. 또한 thermionic emission에 의한 주입 전류의 forward flux 증가가 캐리어 주입을 증가시키고, 레이저 다이오드의 직렬 저항을 감소시키는 것을 보였다.

• 한국인터넷방송통신학회논문지
• /
• 제16권4호
• /
• pp.153-158
• /
• 2016

본 논문에서는 접지된 2중 유전체층 사이의 완전도체띠 격자구조에 의한 TE(transverse electric) 산란문제를 전자파 수치해석 방법으로 알려진 PMM(point matching method)을 이용하여 해석하였다. 경계조건들은 미지의 계수를 구하기 위하여 이용하였고 산란 전자계는 Floquet 모드 함수의 급수로 전개하였으며, 도체띠의 해석을 위해 완전도체 경계조건을 적용하였다. 완전도체띠의 폭과 주기, 접지된 2중 유전체층의 비유전율과 두께 및 입사각에 대해 정규화 된 반사전력을 계산하였다. 최소값을 가지는 변곡점들의 대부분의 반사전력은 입사각 이외의 다른 방향으로 산란된다. 접지된 2중 유전체층을 가지는 제안된 구조에 대한 수치결과들은 기존 논문의 수치해석 결과들과 비교하여 매우 잘 일치하였다.

• 한국전자파학회논문지
• /
• 제29권6호
• /
• pp.449-456
• /
• 2018

본 논문에서는 마이크로파 무선전력전송에 적용될 수 있는 여러 다중 빔 형성 방법을 제안한다. 기존의 다중 빔 형성방법은 능동소자패턴(active element pattern: AEP)을 고려하지 않기 때문에 실제 시스템에 적용 시 의도한 빔 형성과 오차가 발생하게 된다. 이를 해결하기 위해 능동소자패턴의 평균을 고려하는 방법과, 변형된 푸리에 급수 방법을 통해 모든 능동소자패턴을 고려하는 방법이 제안되었다. 또한, 부엽과 null 제어를 위하여 Dolph-Tschebyscheff 방법에 중첩의 원리를 적용하여 다중 빔을 형성하는 방식을 제안하였다. 제안된 방식을 사용하여 다중 빔 형성 시 의도된 빔 형성과의 오차가 감소하는 것을 확인하였으며, 다중 빔 형성을 하며 부엽 제어를 동시에 할 수 있는 것을 확인하였다.

• 한국태양에너지학회 논문집
• /
• 제37권1호
• /
• pp.1-14
• /
• 2017

A series of coupled time domain simulations considering stochastic waves and wind based on five 1-h time-domain analyses are performed in normal operating conditions. Power performance and tower base Fore-Aft bending moment and pitching motion response of the floating spar-buoy wind turbine with 2 MW direct-drive PMSG have been analyzed by using HAWC2 that account for aero-hydro-servo-elastic time domain simulations. When the floating spar-buoy wind turbine is tilted in the wind direction, maximum of platform pitching motion is close to $4^{\circ}$. Statistical characteristics of tower base Fore-Aft bending moment of floating spar-buoy wind turbine are compared to that of land-based wind turbine. Maximum of tower base Fore-Aft bending moment of floating spar-buoy wind turbine and land-based wind is 94,448 kNm, 40,560 kNm respectively. This results is due to changes in blade pitch angle resulting from relative motion between wave and movement of the floating spar-buoy wind turbine.

• Smart Structures and Systems
• /
• 제19권2호
• /
• pp.163-179
• /
• 2017

The axisymmetric buckling delamination of the Piezoelectric/Metal/Piezoelectric (PZT/Metal/PZT) sandwich circular plate with interface penny-shaped cracks is investigated. The case is considered where open-circuit conditions with respect to the electrical displacement on the upper and lower surfaces, and short-circuit conditions with respect to the electrical potential on the lateral surface of the face layers are satisfied. It is assumed that the edge surfaces of the cracks have an infinitesimal rotationally symmetric initial imperfection and the development of this imperfection with rotationally symmetric compressive forces acting on the lateral surface of the plate is studied by employing the exact geometrically non-linear field equations and relations of electro-elasticity for piezoelectric materials. The sought values are presented in the power series form with respect to the small parameter which characterizes the degree of the initial imperfection. The zeroth and first approximations are used for investigation of stability loss and buckling delamination problems. It is established that the equations and relations related to the first approximation coincide with the corresponding ones of the three-dimensional linearized theory of stability of electro-elasticity for piezoelectric materials. The quantities related to the zeroth approximation are determined analytically, however the quantities related to the first approximation are determined numerically by employing Finite Element Method (FEM). Numerical results on the critical radial stresses acting in the layers of the plate are presented and discussed. In particular, it is established that the piezoelectricity of the face layer material causes an increase (a decrease) in the values of the critical compressive stress acting in the face (core) layer.

• 대한전자공학회논문지
• /
• 제8권3호
• /
• pp.1-14
• /
• 1971

본논문은 릴레이 제어기구의 안정도해석과 종합성능판별의 기초가 되는 리미트사이클진동의 주기해를 정확하고도 신속하게 얻을 수 있는 방법을 개발한 것으로서 특히 궤적법은 동종의 릴레이에 대해서는 특서정수의 변화에 대해서 직각대응시킬 수 있고, 주기해를 정확하게, 그리고 신속하게 직속할 수 있는 장점을 지닌다. 이제까지 다루워 왔던 describing 함수해석법과도 비교하여 그의 부정확성과 불편성 동종릴레이 특성정수변화에 대한 비적응성도 검토하여 궤적법의 우월을 명시하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.279-282
• /
• 2003

In this paper, to apply piezoelectric transformer for PDA backlight inverter, piezoelectric transformer using the composition which $Nb_2O_5$ added into PNW-PMN-PZT ceramics was fabricated as Rosen-type one with the size of $1165mm^3$. And their electrical characteristics were investigated with the variations of load resistance and driving frequency And then, the driving circuit for PDA CCFL(0.6W) which composed of the two MOSFETs connecting in series was manufactured using piezoelectric transformer, VCO and one-chip microprocessor. After driving for 25 min using the proposed circuit for PDA CCFL(0.6W), driving frequency of 214.4kHz, input voltage of 31.78 V and input current of 21.1mA were shown. And then, output voltage of 293.2 V and output current of 2.2mA were shown. At the same time, efficiency of 96.2$\%$ and temperature rise of $3.6^{\circ}C$ were appeared at the piezoelectric transformer.

• 수산해양기술연구
• /
• 제7권1호
• /
• pp.1-8
• /
• 1971

The forth dye diffusion experiment, which was authorized by the Office of Atomic Energy, and some physical aspect of oceanographic observations were carried out in the sea off Kori in September 29-October 1, 1971. In a series of drift bottle experiments the 337 bottles were released. And bottom topography by echo soundings in the survey was well approached to the chart No. 433, Kori and Approaches, published by Hydrographic Office in October 1970. Results deduced from this survey were as follows: 1. A small ridge extends from Kori-Mal tip in southwestward over 1300 meters, and eastside of which is plain and a little sloping while westside of which cliffy and very steeper sloping. 2. A gyre was formed in the waters from Kori-Mal to Mat-dum in cum sole definitely at flood tide and in contra solem less definitely at ebb tide. And that the gyre rose and decayed with the turn of the tide. 3. Diffusion coefficients of 2.5% Rhodamine B solution of 200 liters were 9. 3 ${\times}{10^2}$ c$m^2$/sec in the waters Kori-Mal to Mat-dum and 28.6${\times}{10^2}$ c$m^2$/sec in the waters eastside of Mat-dum at the time after 26 minutes from releasing of the dye solution. 4. According to the above results the eastside of Mat-dum is rather recommendable to settle as the point for the outlet of drainage or waste of atomic power plant to be constructed.