• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1606-1608
• /
• 2002

The triac is a bidirectional triode with blocking and conducting characteristics used in motor control or heater power control. This greatly simplifies the circuits required for the control of the full wave AC Power by reducing the number of power handling components and by reducing the size and complexity of the gate control circuit.[3] In this paper, We can understand measurement results of analysis which have been made on the electrical characteristics of triac with gate diffusion time for the gate area.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.210-212
• /
• 2018

A new switching mode has been proposed to obtain high power factor and low THD in single stage AC-DC converter. The conventional voltage mode control in critical conduction mode distorts input current shape with poor THD in flyback topology. Once TRIAC dimmer is connected, visible flicker in the LED lamp is easily detected due to a lack of TRAIC holding current near the input voltage zero cross. The newly proposed method can shape the input current by providing a desired reference voltage so that low THD is obtained by ideal sinusoidal input current in case of no dimmer connection and flat input current performs good TRIAC dimmer compatibility in phase-cut dimming condition. To confirm the validity of the proposed method, theoretical analysis and experimental result from 8W dimmable LED lighting system are presented.

• Journal of the Korean Society of Radiology
• /
• v.6 no.6
• /
• pp.495-498
• /
• 2012

In this paper, the basic behavior of the environment and the driving time as a prediction of the lifetime of the power semiconductor devices were recorded. Radiator of a power device driving time and temperature operating environment, including cumulative record by the controller of the power converter, and doing it so you can see the power semiconductor devices for the life of the structure that the size of the change in the temperature of the semiconductor chip and the number of iterations to maintenance warranty period because of a lifetime by forecasting or replacement can be made at the appropriate time that is considered.

• Korean Journal of Metals and Materials
• /
• v.49 no.9
• /
• pp.708-714
• /
• 2011

The premature failure of a servovalve used for six months in a thermal power plant has been analyzed. The servovalve was made of stainless steel, containing 16Cr-0.44Mo, along with other elements. An overload of oil-supply pumping and an abnormal increase in the oil flux were observed during operation. A study revealed that erosion and corrosion could be the main causes of the failure. The visual examination of the servovalve did not show any appreciable damage. However, corrosion and erosion of the servovalve were observed using scanning electron microscopy (SEM). Upon examination of the servovalve, the corrosion was found to have occurred throughout the bushing and spool; however, erosion occurred at only the edge-side. In addition, the condition of the electrohydraulic control system (EHC) oil was investigated with respect to its satisfaction of the management standard.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.2 s.19
• /
• pp.45-48
• /
• 2007

The proposed method offers an improved DC/DC converter scheme to increase power density. It is based on half-bridge topology with newly introduced pulse-grouping control method, which helps to reduce the transformer size and the volume of semiconductor devices maintaining high efficiency. Test results with 85W(18.5V/4.6A) design shows that the measured efficiency is 93.5% with power density of $36W/in^3$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.6-7
• /
• 2008

Current sensing in power semiconductors involves sensing of over-current in order to protect the device from harsh conditions. This technique is one of the most important functions in stabilizing power semiconductor device modules. The sense FET is very efficient method with low power consumption, fast sensing speed and accuracy. In this paper we have analyzed the characteristics of proposed sense FET and optimized its electrical characteristics to apply conventional 450V power MOSFET devices by numerical and simulation analysis. The proposed sense FET has the n-drift doping concentration $1.5\times10^{14}cm^{-3}$, size of $600{\mu}m^2$ with 4.5 $\Omega$, and off-state leakage current below 50 ${\mu}A$. We offer the layout of the proposed sense FET to process actually. The offerd design and optimization methods is meaningful, which the methods can be applied to the power devices having various breakdown voltages for protection.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.2
• /
• pp.353-360
• /
• 2017

Recently, due to physical limitation of Si based power semiconductor, development speed of switching power semiconductors is falling and it is difficult to expect any further performance improvements. SiC based power semiconductor with superior characteristic than Si-based power semiconductor have been developed to overcome these limitations. however, there is not method to apply for real system. Therefore, suggested the feasibility and solution for SiC-based power semiconductor system. design to 1kW class DC-DC boost converter and demonstrated the superiority of SiC MOSFET under the same operating conditions by analyzing switching frequency, duty ratio, voltage and current, and comparing with Si based power semiconductor through experimental efficiency according to each system load. The SiC MOSFET has high efficiency and fast switching speed, and can be designed with small inductors and capacitors which has the advantage of volume reduction of the entire system.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.195-198
• /
• 2000

A CMOS power amplifier for wireless home networks is designed using 0.2sum 1-poly 5-metal standard CMOS technology and simulation results are presented. The power amplifier provides maximum output power of 16.5dBm to a 50-Ohm load at 2.450Hz and dissipates 220mW of dc power from a single 2.5-V supply. The designed CMOS power amplifier has power control range of 20dB and an overall power-added efficiency of 17%

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.4
• /
• pp.388-396
• /
• 2012

In this paper, a $320{\times}240$ pixel, 80 frame/s CMOS image sensor with a low power dual correlated double sampling (CDS) scheme is presented. A novel 8-bit hold-and-go counter in each column is proposed to obtain 10-bit resolution. Furthermore, dual CDS and a configurable counter scheme are also discussed to realize efficient power reduction. With these techniques, the digital counter consumes at least 43% and at most 61% less power compared with the column-counters type, and the frame rate is approximately 40% faster than the double memory type due to a partial pipeline structure without additional memories. The prototype sensor was fabricated in a Samsung $0.13{\mu}m$ 1P4M CMOS process and used a 4T APS with a pixel pitch of $2.25{\mu}m$. The measured column fixed pattern noise (FPN) is 0.10 LSB.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2659-2661
• /
• 1999

This paper studies the scope and object of international standards related to power supplies and semiconductor convertors. IEC 60478 and IEC 60686 are international standards for stabilized power supplies with DC and AC output, respectively, and IEC 61204 for low-voltage power supply devices with DC output. IEC 60146 : Semiconductor Convertors is a representative international standard in the field of semiconductor convertors. In this field, there are some international standards such as IEC 60971. IEC 61136-1. IEC 61800. and etc.. In this paper, IEC 60686, 60971, 61136-1, and 61240 are mainly studied.