• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.19-20
• /
• 2014

Boiler design should be desinged to maximize thermal efficiency of the system under imposed load requirement and a boiler should be validated for transient operation. If a proper prediction is possible on the transient behavior and transient characteristics of a boiler, one may asses the performance of boiler component, control logics and operation procedures. In this work, dynamic modeling method of boiler is presented and dynamic simulation of load runback scenario was carried out on suprecritical oil-firing boiler.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.522-523
• /
• 2015

This paper proposes a deadbeat current controller using predictive current method for three-phase shunt active power filter (SAPF). In proposed controller, the compensating current reference which is necessary for the deadbeat control is estimated by using the predictive current method. This method can improve the accuracy of compensation and ensure the fast dynamic response of SAPF. Simulations have been carried out to demonstrate the perfomance of SAPF using proposed control method.

• Korean Journal of Hydrosciences
• /
• 제3권
• /
• pp.81-96
• /
• 1992

This study represents the methodology for feasibility analysis of small hydro power SHP plant. Cumulative density function of Weibull distribution and Thiessen method were adopted to decide flow duration curve at SHP candidate site. The perfomance prediction model and construction cost estimation model for tunnel-type SHP plant were developed. Eight tunnel -type SHP candidate sites existing on Han-river were selected and surveyed for actual site reconnaissance. The performance characteristics and economical feasibility for these sites were analyzed by using developed models. As a result, it was found that the optimum design flowrate with the lowest unit generation cost for tunel-type SHP candidate site were the flowrate concerming with between 20% and 30% of time ratio on the flow duration curve. Additionally, primary design specifications such as design flowrate, effective head, capacity, annual averageload factor, annual electricity production were estimated and discussed for eight surveyed SHP candidate sites.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.494-497
• /
• 2012

A methodology to predict the output performance of small hydro power using treated effluent in wastewater treatment plant has been studied. Existing plant located Kyunggi-Do were selected and the output performance characteristics for these plants were analyzed. As a result, it was found that the developed model in this study can be used to analyze the output characteristics for small hydro power in wastewater treatment plant. Additionally, primary design specifications such as design flowrate, capacity, operational rate and annual electricity production were estimated and discussed.

• 동력기계공학회지
• /
• 제19권6호
• /
• pp.33-38
• /
• 2015

In this study new CVT(Continuously Variable Transmission) system which is adaptable to a small size electric vehicle is proposed available to gradient response CVT. New pulleys consist of springs adapted driving pulley and driven pulley. At the moment a small electric vehicle drive a slope, new system respond to a gradient as overcoming tensional force of springs. We made prototype of gradient response CVT to test parts performance and travelling performance test. As a result of test, belt pitch diameter varied for high torque direction at the gradient. In the flat travelling, acceleration travelling and gradient travelling performance test, the small electric vehicle with gradient response CVT get improved perfomance than the small electric vehicle with reduction gear.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 춘계학술발표논문집 2부
• /
• pp.1007-1009
• /
• 2010

실험을 통하여 엔진의 성능을 파악하고자 한다면 적지 않은 시간동안 많은 비용과 노력이 필요하다. 최근 연구에서는 이러한 단점을 해결하기 위해 CFD를 이용 선행해석을 통해 미리 그 엔진의 성능을 예측하여 실험에 들이는 시간과 비용을 줄여가고 있다. 본 연구는 실험을 통하여 소형엔진의 성능을 알아보기 이전에 선행해석을 통해 소형엔진의 성능을 예측하고자 한다. 소형엔진의 선행 해석을 위해 전자제어 연료분사 방식의 400cc급 소형엔진을 모델링하고 1D 해석프로그램인 GT-Power를 통하여 엔진의 Toque, Power 및 배기가스를 예측하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권9호
• /
• pp.870-875
• /
• 2015

디젤 엔진은 출력 및 연료소비율이 우수하여 많이 사용되고 있다. 그러나 디젤엔진은 가솔린엔진에 비하여 배출가스 저감 기술 등에서 아직 해결해야할 문제점들이 많고, 대기오염의 주범이다. 디젤엔진에 있어 배기가스 재순환(EGR; Exhaust Gas Recirculation) 기술은 여러 촉매 기술에 비해 질소산화물(NOx) 배출 저감을 위한 가장 효과적인 기술이며 또한 경제성, 적용 가능성 측면에서도 많은 장점을 갖고 있다. 본 연구에서는 EGR 시스템을 장착한 디젤 엔진을 대상으로 EGR이 디젤기관의 출력 성능 및 배기특성에 미치는 영향을 고찰하였고, 다음과 같은 결론을 얻었다. EGR율이 증가함에 따라 IHP 및 BHP는 감소하며, 순수EGR에 의한 영향은 엔진회전수에 따라 차이는 있지만, 순수 EGR에 의한 BHP는 저속 운전에서는 약 9%, 고속운전에서는 3.5% 정도 감소하였다. 그리고 NOx는 EGR율이 증가함에 따라 감소하고, 엔진회전수 증가할수록 증가한다. 또한 매연(smoke)은 EGR율이 증가함에 따라서 증가하고, 엔진회전수가 증가할수록 감소한다. EGR율에 따라 NOx와 매연 배출을 동시에 최소로 할 수 있는 최적의 운전 상태가 존재하며, EGR율이 증가할 수록 NOx 및 매연을 위한 최적운전 속도는 증가한다.

• 조명전기설비학회논문지
• /
• 제24권1호
• /
• pp.145-151
• /
• 2010

영구자석의 반발력을 이용한 반송장치에서 캐리어를 받아 다음 스테이션으로 방향을 전환해주기 위한 회전판의 제어를 수행하기 위한 제어기로서 적당한 모터의 선정을 위하여 두 가지 형태의 제어기를 만들고 이를 비교하여 최적의 제어기를 선정하고자 하였다. 즉 스텝모터를 사용한 마이크로스텝방식의 오픈루프 제어와 DC모터를 사용한 폐루프 제어방식의 DC서보 방향제어기를 설계하고 제작하였다. 이 두 방식의 방향제어기의 성능과 제어특성을 비교하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.166-170
• /
• 1998

The metal transfer of CO2 arc welding machine can be devided into short-circuit(low current) metal transfer. Especially in large crrent region, the main problem of CO2 arc welding machine is much spatter generation which is caused by mainly instant short-circuit matal transfer. So in this paper descrives new current control method in large current region, which can improve welding performance and lessen spatter generation. And as a result of experiment, the effect of proposed control method is demonstrated.

• Tribology and Lubricants
• /
• 제13권3호
• /
• pp.73-84
• /
• 1997

ER clutch is a device using ER fluid, so called "intelligent material" and is a controlled system with electric field strength. Currently, the temperature of ER fluid increases and affects the performance of ER clutch when ER clutch is operating. This study was undertaken to estimate this performance variation due to temperature rise of ER fluid. An analytic heat transfer model of concentric cylinder type ER clutch was developed and with this model, effects of changing geometric, kinetic parameters of ER clutch and ER fluid properties were described. In conclusion, compared with neglecting thermal effects, a performance of ER clutch was very differential and for uniform performance of ER clutch, we have to improve thermal stability of ER fluid. ER fluid.