• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.8
• /
• pp.927-934
• /
• 2015

In this paper, in order to prevent impulse surge PoE(Power Over Ethernet) communications error caused by natural phenomenon in industrial sites, countermeasure design of impulse surge of PoE communications equipment is suggested by designing dual impulse surge protection circuit. In order to analyze characteristic of impulse surge noise signal, surge generating device which meet international standard IEC 61000-4-5 is invented. And this device shows that surge signal is weakened by designing dual PoE power supply protection circuit by connecting surge generating device to the PoE data transfer line.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.362-367
• /
• 2005

Control network adopted in the national power-plant or manufactory are mostly vendor-dependent products, which have their own special specification, components and individual communication methods. These systems not only raise installation cost, but also bring many difficulties to maintenance and extension. To overcome these problems, this paper introduces a development and application case of a new "PC/Ethernet-based fieldbus" architecture and protocol to be used in mid-level fieldbus. The designed system has a basic idea of "3 Layers fieldbus over Standard-LAN" and implemented on PCs. PC gives user friendly environment. By using an open standard Ethernet in layer 1,2, the system has low cost, wide communication bandwidth and high compatibility. Layer 3 protocol designed for large realtime data communication makes user bypass TCP/IP layer and gives user direct access to the Ethernet. This new protocol eliminates potential collision of Ethernet, and transmits large periodic/non-periodic control data by using long-frame/wide-bandwidth of Ethernet effectively, and offers simple API-Services to the upper layer. Since the system have installed in H-power plant simulator and U-nuclear power plant simulator in Korea, it have been proved to be efficient and stable without any trouble in realtime communication service for full-scope plant simulator that has a lot of control elements.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.4
• /
• pp.71-79
• /
• 2011

This paper proposes a reliability enhancement of industrial real-time Ethernet using master redundancy method for NPPs(Nuclear Power Plants). In this paper, Ethernet Powerlink is investigated for distributed control systems for NPPs considering real-time and reliability performance. The proposed method can reduce a master switch-over time using PReq signal when Ethernet Powerlink master(Managing Node) failure was occurred. Using the OPNET simulation results, the performance enhancement of master switch-over time of Ethernet Powerlink is verified for NPPs.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.570-572
• /
• 2000

In this paper, we present the configuration of Direct Load Control System using TCP/Ethernet Module for the Load Management Europe and America has operated the DLC system by many communication system, and Taiwan, Japan has controlled the cooling load at peak hours of power system. Up to now, Many Researches for the DLC of communication method, so called, pager, power line carrier, ripple control, etc. has advanced. Now, we present new communication method for the DLC using TCP/Ethernet module which is widespread all over the world.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.1
• /
• pp.195-209
• /
• 2024

The current road traffic signal controller developed in the 1990s has limitations in flexibility and scalability due to power supply problems, various communication methods, and hierarchical black box structures for various equipment and devices installed to improve traffic safety for road users and autonomous cooperative driving. In this paper, we designed a road traffic safety facilities equipment and devices integrated management system that can cope with the rapidly changing future traffic environment by solving the using direct current(DC) and power supply problem through the power over ethernet(PoE) technology and centralized data-driven control through message broker technology. In addition, a data-driven real-time control method for road traffic safety facilities equipment and devices operating based on time series data was implemented and verified.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.5
• /
• pp.1102-1109
• /
• 2017

In Train Control Network(TCN), to support advanced services beyond control applications, it was revised to support high speed ethernet as IEC 61375-2-5(ETB) and IEC 61375-3-4(ECN). And Train Topology Discovery Protocol(TTDP) was included by which train-consist can be automatically configured. Meanwhile, to adopt wireless LAN as an next onboard network, TTDP need to be modified to reflect the characteristics of WLAN. This paper proposed a TTDP for WLAN using transmission power control and the number of HELLO-ACK handshake. And it determined whether the TTDP executed using the two WLAN interfaces having different bandwidths is correct or not. The proposed TTDP can allow to reduce interference from other nodes. For evaluation of performance of TTDP, NS-2 was used. The evaluation result shows the high reliability of the TTDP in wireless environment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.381-385
• /
• 2010

An aging Society solitary life old mans are increasing. The nurses have to visit old mans and must confirm their disease, because they do not act well. It is very difficult to take care old man, because the number of Nurses are small. This problem is solved by collection of data about condition of old mans from long distance. Data communication with Ethernet have benefit to collection of measurement of old man's condition. The Data storage system an long distance place are storaged data and after several day data was transmitted to the DB over the Ethernet. For Miniaturization of such system the system must be OS-less Embedded Ethernet Server system. Such system manages the file management system only with H/W. The Storage device is used SD-card. SD Card is small size and operates with small power. By using 512MB sd memory card, it is possible to storage during 5~6 years, 10 byte of temperature value per second. In this paper, we make a Embedded Ethernet Server using W3100A, Atmega128 MCU and data stroage device using SD-Card. This system operates with O/S-less Embedded Ethernet Server. We talk about file System, Storage and Ethernet. We explained about MCU Atmega128, Interface between LAN LSIand W3100A, Interface between W3100A and Phyceiver RTL8201, data I/O between MCU and SD-Card and File System. We shows the experiment device and result of monitoring.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.415-416
• /
• 2012

본 논문에서는 저가격형 PoE(Power over Ethernet)를 위한 새로운 부하분담기법을 적용한 스위칭 전원 회로를 제안한다. 기존의 PoE 전원회로는 Ethernet 채널 당 제한된 전력용량으로 인해 보다 큰 전력이 요구될 경우 채널별 DC/DC컨버터의 출력을 서로 병렬 접속하여 사용하고 있으며 각 채널별 부하를 동일하게 분담하기 위해 부하분담 IC 및 부가회로가 추가됨에 따라 회로 구조가 복잡하고 부피가 증대되는 단점이 있다. 제안된 PoE 전원회로는 이러한 문제를 해결하기 위해 병렬 연결된 채널 간 부하분담을 별도의 부가회로 없이 일정하게 제어할 수 있다. 제안 회로의 타당성 검증을 위해 이론적 분석 및 50W 급 시작품 제작을 통한 실험결과를 제시한다.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.838-846
• /
• 2012

This paper proposes a cost-effective hybrid-type power budget extender (PBEx) that can provide a high power budget of over 45 dB in an asymmetric 10-Gb/s Ethernet passive optical network (10/1G-EPON). The hybrid-type 10/1G-EPON PBEx comprises a central office terminal (COT) and remote terminal (RT) module supporting four channels and uses a coarse wavelength division multiplexing (CWDM) technology between the COT and RT for a reduction of fiber cost and efficient access network design. The proposed 10/1G-EPON PBEx can provide over a 40-km reach and 128-way split per CWDM wavelength with no modification of a legacy 10/1G-EPON system and can satisfy the error-free service in $10^{10}$ packet transmission.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.857-864
• /
• 2020

The multi-functional VoIP phone supports the Ethernet protocol in the TIPS(: Tactical IP Switch), which is one of the sub-systems of the tactical information and communication system (TICN). It provides secured voice / video calls in conjunction with VoIP exchanges and supports differential services such as multi-party calls and command functions. In this paper, improving methods have been proposed to reduce power supply defects in the field of multi-functional VoIP phones. The power supply part was improved by applying TVS of the output voltage inlet of the dedicated adapter of the multi-functional VoIP phone, TVS of the PoE module input, adding blocking diodes, and adding DC / DC converters behind the poly-switch. Also, functional and environmental tests were performed to verify the validity of the proposed methods.