• 대한안전경영과학회지
• /
• 제8권4호
• /
• pp.249-265
• /
• 2006

A life cycle assessment(LCA) is increasing its applicability as a powerful tool for an environmental burdens analysis. In this study, some cases are compared in terms of analysis procedures and results obtained with LCAs for evaluating power generation technologies in Korea. For the comparison, 3 power generation technologies are selected because they produces almost 90% of 2003 total electricity generation in Korea. It is shown that the range of evaluation values amounts to maximally the order of about 105, which is rather large discrepancy than the level of 101 in comparison with foreign studies. The difference seems to be due to the simplicity of modeling used in each case study. It is proposed that this large discrepancy should be obviously clarified to improve their reliability in that electricity is a essentialness for all industries and the capacity of LCA of national-level electricity affects the results of LCA for the other sectors.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권2호
• /
• pp.302-317
• /
• 2017

This paper proposes a new full adder design based on pass-transistor logic that offers ultra-low power dissipation and superior variability together with low transistor count. The pass-transistor logic allows device count reduction through direct logic realization, and thus leads to reduction in the node capacitances as well as short-circuit currents due to the absence of supply rails. Optimum transistor sizing alleviates the adverse effects of process variations on performance metrics. The design is subjected to a comparative analysis against existing designs based on Monte Carlo simulations in a SPICE environment, using the 22-nm CMOS Predictive Technology Model (PTM). The proposed ULP adder offers 38% improvement in power in comparison to the best performing conventional designs. The trade-off in delay to achieve this power saving is estimated through the power-delay product (PDP), which is found to be competitive to conventional values. It also offers upto 79% improvement in variability in comparison to conventional designs, and provides suitable scalability in supply voltage to meet future demands of energy-efficiency in portable applications.

• 한국의류학회지
• /
• 제36권9호
• /
• pp.916-927
• /
• 2012

In the $21^{st}$ century, woman leaders are able to influence society through improved social status and economic power. From 1980-1990 there was a rapid global social development of feminism and improved media perceptions. The progression of this process is reflected by female characters in feminism films that included a new dress style. The power suit emerged in the U.S.A of the 1980s, as a dress code that showed the workplace uniform of a professional woman and spread to Korea as an influential style. This study defines the different and similar aspects in the development of women's position and the role involved in a structural background through a comparison of the socio-cultural meaning of the power suit expressed in American and Korean feminism films. For analysis, this study chose American films in the 1980s and Korean films in 1990s that fulfilled elements about feminism films. Subsequently in American feminism films, the power suit expressed an equal authority with men, strategic use of femininity according to task type, and a dissipation of symbolic effects like a rich look. In Korean feminism films, the power suit expressed an end of femininity like female transvestite, independent female images with the masculinization of appearance, and a mix of new and traditional styles.

• 전기학회논문지
• /
• 제64권8호
• /
• pp.1212-1216
• /
• 2015

In this paper, we compared the performance of the Right Handed Nonlinear Transmission Line (RH-NLTL) and Left Handed Nonlinear Transmission Line (LH-NLTL) as a harmonic generator. For a performance comparison, we fabricated both a RH-NLTL and a LH-NLTL harmonic generator whose operational bandwidth is from 0.5 GHz to 1.5 GHz. Under the each condition for the RH-NLTL and the LH-NLTL to maximize second harmonic, the output power of the second harmonic was 9.33 dB lower than the input power for the RH-NLTL and 12.67 dB lower than the input power for the LH-NLTL. Under the each condition for the RH-NLTL and the LH-NLTL to maximize third harmonic, the output power of the third harmonic was 13.33 dB lower than the input power for the RH-NLTL and 14.83dB lower than the input power for the LH-NLTL. Also, we have observed that, generatlly, a RH-NLTL is useful in generating various multiple harmonics and a LH-NLTL is useful in generating a specific order of harmonic by adjusting a proper DC vias, input frequency and input power. These tendencies could be a good guideline to use NLTLs as a frequency multiplier.

• Journal of Power Electronics
• /
• 제11권5호
• /
• pp.621-631
• /
• 2011

In space qualified DC-DC converters, optimization of the following electrical characteristics is of greater interest in comparison with other specifications; power loss/efficiency, output voltage ripple and volume/weight. The main goal of this paper is to present an appropriate solution for optimizing the above mentioned characteristics. For this purpose, a comprehensive power loss model of a DC-DC converter is fully developed. Proper models are also demonstrated for assessment of the output voltage ripple and the utilized transformer volume as the bulkiest component in a DC-DC converter. In order to provide a test bed for evaluation of the proposed models, a 50W push-pull DC-DC converter is designed and implemented. Finally, a novel cost function with three assigned weight functions is proposed in order to have a trade-off among the power loss, the output voltage ripple and the utilized transformer volume of the converter. The cost function is optimized for applications in which volume has the highest priority in comparison with power loss and ripple. The optimization results show that the transformer volume can be decreased by up to 51% and this result is verified by experimental results. The developed models and algorithms in this paper can be used for other DC-DC converter topologies with some minor modifications.

• 한국안전학회지
• /
• 제34권1호
• /
• pp.1-7
• /
• 2019

Electromagnetic measurements of the power cable tunnel were conducted from August 10 to 20, 2018, in the ${\bigcirc}{\bigcirc}$ city underground utility tunnel. During this period, the average temperature was $31.89^{\circ}C$ and the humidity was 67.56% in power cable tunnel. As a result of the electromagnetic measurement, the highest electric field was 25.3 V/m and the magnetic flux density was $42.6{\mu}T$. The average electric field was 18.56 V/m and the magnetic flux density was $29.32{\mu}T$ in the power cable tunnel. As a result of comparison with the electric equipment technical standard, the electric field in the power cable tunnel was 0.5% of the electric equipment standard and 35.2% of the magnetic flux density. It's similar value that electric field is about robotic vacuum(15.53 V/m), and magnetic flux density is similar value about capsule- type coffee machine ($23.07{\mu}T$). The number of cable lines and the size of the electromagnetic waves were not proportional to each other through comparison of cable lines in the power cable tunnel. It was confirmed that 154 kV, rather than 22.9 kV, could have a greater influence on occupational.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 추계학술발표회 발표논문집
• /
• pp.125-126
• /
• 2004

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.237-240
• /
• 2000

A new control method using average comparison strategy have been proposed in this paper. This control method realizes sinusoidal input and output current. unity input displacement factor regardless of load power factor. Moreover compensation of the asymmetrical and harmonic containing input voltage is sautomatically realized and calculation time of control function is reduced.

• 한국농공학회지
• /
• 제37권E호
• /
• pp.1-9
• /
• 1995

It is shown that two step power transformation is more efficient for the normalization of frequency distribution with the coefficient of skewness of zero in comparison with others including SMEMAX and power transformations. It is confirmed that the design low flows calculated using power and two step power transformations used in this study are generally nearer to the observed data as compared with those of SMEMAX transformation at all return periods in the applied watersheds of the Kum, Naktong and Yongsan rivers in Korea.

• 한국수소및신에너지학회논문집
• /
• 제33권6호
• /
• pp.707-714
• /
• 2022

Hydrogen production using solid oxide electrolysis cells (SOEC) is a promising technology because of its efficiency, cleanness, and scalability. Especially, high-power SOEC system has received a lot of attention from researchers. This study compared and analyzed the low-power and high-power SOEC system in term of economic. By using revenue requirement method, levelized cost of hydrogen (LCOH) was calculated for comparison. In addition, the sensitivity analysis was performed to determine the dependence of hydrogen cost on input variables. The results indicated that high-power SOEC system is superior to a low-power SOEC system. In the capital cost, the stack cost is dominant in both systems, but the electricity cost is the most contributed factor to the hydrogen cost. If the high-power SOEC system combines with a nuclear power plant, the hydrogen cost can reach 3.65 $/kg when the electricity cost is 3.28 ¢/kWh and the stack cost is assumed to be 574 $/kW.