• 해양환경안전학회지
• /
• 제18권6호
• /
• pp.610-616
• /
• 2012

세계는 지금 본격적인 에너지 기후시대로 도래했으며 녹색성장을 이끌 강력한 에너지 정책이 선진국가 진입의 초석으로 신재생에너지를 활용하여 미래의 에너지 자원으로 동력화하는 것이 21세기 에너지 수요를 충족시키는 개발 목표가 되고 있다. 최근 신재생에너지 개발의 필요성에 따라 해양에너지가 주목을 받고 있다. 해양에너지는 아직 개발되지 않은 가장 유망한 재생 및 청정에너지 자원 중 하나이다. 이에 따라 각 해역에 적합한 조류에너지 변환장치의 개발이 매우 필요하다. 본 연구에서는 조류발전용 터빈에 작용하는 유입각, 해저면 효과 및 공동현상 발생에 따른 효율의 변화를 후류유동특성을 통해 파악하였다. 계산 조건하에서 해저면 효과에 의한 효율저하는 크게 나타나지 않았고, 유입각은 10도 이상부터 효율 저하가 나타났고 45도에서는 출력계수가 7 % 낮게 계산되었다. 유입속도가 증가할수록 토크와 출력계수가 증가하였으나, 공동현상이 발생하는 3 m/s이상부터 오히려 출력저하가 나타났다. 또한 유동특성의 고찰을 통해 유입각이 크고 공동현상이 나타날수록 출력감소의 원인이 됨을 확인하였다.

• 한국인터넷방송통신학회논문지
• /
• 제13권1호
• /
• pp.49-54
• /
• 2013

WPM(Wavelet Packet Modulation)은 고속 전송에 적합한 다중 반송파 전송방식으로 여러 필터의 조합으로 유연한 시스템을 구현할 수 있는 장점이 있다. WPM과 같은 다중 반송파 시스템에서 높은 PAPR(Peak to Average Power Ratio)은 가장 큰 문제점중 하나이다. 본 논문에서는 WPM 시스템의 필터 계수를 조정 하는 방법으로 최소 PAPR을 갖는 WPM 시스템을 제안한다. 우선 PR(Perfect Reconstruction)을 만족하는 필터 계수의 방정식을 구하여 그 방정식을 이용하여 PAPR이 가장 낮게 나올 수 있는 필터계수를 선택한다. 이 필터 계수를 이용하여 최소 PAPR을 갖는 WPM 시스템을 구현하고 모의실험을 통하여 성능 비교를 하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2009년도 학술발표회 초록집
• /
• pp.1306-1310
• /
• 2009

The roughness coefficients were estimated by the Manning's equation for the measured stage and flow velocity of Bocheong stream basin in Kum river. The relationships between the estimated roughness coefficients and the geomorphologic factors were formulated by the linear, logarithmic, exponential and power type function, thereafter correlation equations were presented. The correlation analysis was performed between the measured stream length and the basin area of Bocheong stream basin by the linear, logarithmic, exponential and power type function, and correlation equation for the stream length was given. The roughness coefficient has strong correlationship with stream slope, but low correlation coefficients with stream length and basin area. For the correlationship with the roughness coefficients and the stream slope, the logarithmic type function has the smallest correlation coefficient, on the other hand, the exponential type function has the largest correlation coefficient. For the relationship between the stream length and the basin area, the correlation coefficient of the logarithmic type function shows the smallest value, linear type function shows the largest value.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1267-1269
• /
• 1999

This paper studies on arrangement of load correlation coefficient for advanced load management. To accurate load correlation coefficient, we used two real factors, electrical energy(kWh) and peak load current of pole transformers, acquired by measuring instrument. Out of several correlation equations, we find that the quadratic equation is the most accurate to express peak load current and working electrical energy. If the data is located in the outside of ${\pm}3{\sigma}$ it is discarded. For load management, we rearranged load correlation coefficient considering +2${\sigma}$ at load correlation equation. Comparing conventional load correlation coefficient with rearranged one, we can get the result of error reduced and it is adjacent to the actual data. It will be used peak load forecasting from working electrical energy and we are able to prevent from the damaging of pole transformer due to overload.

• 동력기계공학회지
• /
• 제14권6호
• /
• pp.83-88
• /
• 2010

The wear behavior of epoxy matrix composites filled with nano sized silica particles is discussed in this paper. Especially, the variation of the coefficient of friction and the wear resistance according to the change of apply load and sliding velocity were investigated for these materials. Wear tests of pin-on-disc mode were carried out and the wear test results exhibited as following ; The epoxy matrix composites showed lower coefficient of friction compared to the neat epoxy through the whole sliding distance. As increasing the sliding velocity the epoxy matrix composites indicated lower coefficient of friction, whereas the neat epoxy showed higher coefficient of friction as increasing the sliding velocity. The specific friction work of both materials were increased with apply load. In case of the epoxy matrix composites, the running in periods of friction were reduced as increase in apply load. The epoxy matrix composites were improved the wear resistance by adding the nano silica particles remarkably. It is expected that the load carrying capacity of the epoxy matrix composites will be improved by increase of Pv factor.

• 한국조명전기설비학회지:조명전기설비
• /
• 제11권6호
• /
• pp.90-95
• /
• 1997

고주파 유도가열을 위한 인버터의 공진회로 설계에서 인덕턴스 L의 작용과, 출력전달 요소로 사용된 변압기의 결합계수, 그리고 코일을 사용한 가열부하의 결합계수가 공진회로의 출력, 회로의 Q와 공진주파수에 큰 영향을 주고 있음을 등가회로를 도출하여 그 특성을 해석하였다. 또한 변압기를 테브난 등가회로로 구성할 경우, 변압기의 이차측 임피던스를 일차측 임피던스고 환산하면, 권선비 n$^2$에 비례 할 뿐만 아니라 결합계수 $K^2$에도 비례함을 도출하여 결합계수형 테브난 등가회로에 의한 정확성이 큰 인버터 공진회로 설계의 기초방식을 나타냈다.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.655-664
• /
• 2019

In order to analyze the nonlinear phenomena of the bifurcation and chaos caused by the switching of nonlinear switching devices in inductively coupled power transfer (ICPT) systems, a Jacobian matrix model, based on discrete mapping numerical modeling, is established to judge the system stability of the periodic closed orbit and to study the nonlinear behavior of Hopf bifurcation in a system under full resonance. The general flow of the parameter design, based on the stability principle for ICPT systems, is proposed to avoid the chaos and bifurcation phenomena caused by unreasonable parameter selection. Firstly, based on the state equation of SS-type compensation, a three-dimensional bifurcation diagram with the coupling coefficient as the bifurcation parameter is established with a numerical simulation to observe the nonlinear phenomena in the system. Then Filippov's method based on a Jacobian matrix model is adopted to deduce the boundary of stable operation and to judge the type of the bifurcation in the system. Then the general flow of the parameter design based on the stability principle for ICPT systems is proposed through the above analysis to realize stable operation under the conditions of weak coupling. Finally, an experimental platform is built to confirm the correctness of the numerical simulation and modeling.

• International Journal of Fluid Machinery and Systems
• /
• 제9권2호
• /
• pp.129-136
• /
• 2016

An experimental investigation was carried out to improve the performance of a counter-rotating type horizontal-axis tidal stream power unit. Front and rear blades were designed separately based on modified blade element momentum (BEM) theory, and their performances at different conditions of blade tip speed ratio were measured in a wind tunnel. Three different groups of blades were designed successively, and the results showed that Group3 possessed the highest power coefficient of 0.44 and was the most satisfactory model. This experiment shows that properly increasing diameter and reducing chord length will benefit the performance of the blade.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1077-1080
• /
• 1998

In this paper, a simple low-power current-mode CMOS wotage reference circuit is proposed. The reference circuit of enhancement-mode MOS transistors and resistors. Temperature compensation is made by adding a current component proportional to a thermal voltage to a current component proportional to a threshold voltage. The designed circuit has been simulated using a $0.65\mu\textrm{m}$ n-well CMOS process parameters. The simulation results show that the reference circuit has a temperature coefficient less than $7.8ppm/^{\circ}C$ and a power-supply(VDD) coefficient less than 0.079%/V for a temperature range from $-30^{\circ}C$ to $130^{\circ}C$ and a VDD range from 4.0V to 12V. The power consumption is 105㎼ for VDD=5V and $T=30^{\circ}C.$ The proposed reference circuit can be designed to generate a wide range of reference voltages owing to its current-mode operation.

• 센서학회지
• /
• 제21권4호
• /
• pp.303-310
• /
• 2012

We carried out the power performance evaluation for 1.5 MW${\times}$2 by using anemometer installed on WTGS(Wind Turbine Generator System) in the wind farm at Shi-hwa bang-a-mu-ri. In this paper, we compared and analyzed the performance of guaranteed output and measured output of WTGS which includes output curve, output coefficient, AEP(Annual Energy Product) and availability, etc.. The power performance of WTGS was optimized in the low wind speed sections(3 m/s ~ 10 m/s) and the measured output was more produced by AEP 109 % and availability 112 % than the guaranteed output. In addition, we could also cut the high cost of testing WTGS performance by using anemometer as a substitute for weather mast.