• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1456-1458
• /
• 1999

As the system reliability of power supply is highly increased, we need distribution maintenance techniques without any power interruption. To meet such an increasing demand, a groat deal of hot line work on the high voltage overhead distribution lines has been carried out. In this regard, Hot line work techniques has being applied widely. However, hot line work techniques can not cover all kinds of work without interruption. To cope with those problems, the temporary power supply work technique such as bypass cable truck technique, temporary switch technique and mobile transformer technique was developed and applied. This paper presents the most optimal method according to distribution work contents through the comparison and analysis the characteristis and problems of the existing various work techniques. Also this paper suggested the countermeasers of the prsent problems.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1034-1037
• /
• 2002

A switched-capacitor(SC) type DC-DC converter having capability of integrated circuit fabrication have been marked for the application of mobile equipments. Especially, a ring type SC power supply is featured by the flexible and dynamic voltage conversion ratio change. In this paper, an improvement of the gate driving techniques is proposed for high power efficiency and less area occupation on the chip. Furthermore, its power-saving operation in the stand-by state is proposed. The three-capacitors ring type power supply is really designed and discussed. As results, the simulation results shows the high efficiency of 92.1%, and the higher output put voltage of 10.5 V compared with conventional one of 8.6 V.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09b
• /
• pp.118-121
• /
• 2003

Generally, the repeater in CDMA(Code Division Multiple Access) included HPA(HI-Power Amplifier) to amplifier communication signals. Also , HPA contained PD(Predistortor) to maintain the linearization of amplifier characteristics. A configuration component of PD have been used electricity nonlinear devices such that diode. But this diode takes many influences at the circumstance temperature. Consequently, it can't maintain output linearization, and drop the communication quality. The manufacturer set bias of the circuit to the manual at the first out of ware-house low But the Q-point changes according to the change of the high temperature or low temperature. Therefore, we designed a system to maintain the Q-point by FDM(Fuzzy Decision Maker) in this paper.

• Proceedings of the KAIS Fall Conference
• /
• 2005.05a
• /
• pp.128-131
• /
• 2005

본 논문에서는 정해진 형태의 정보를 입력하면 태양광, 풍력 등의 분산형전원의 도입 및 운용에 대한 각종 정보를 상세하고 전문적(설계나 감리, 운용자 등)인 측면에서 제공받을 수 있는 시스템의 알고리즘을 개발하고자 한다. 구체적으로는 분산형전원의 계통연계 시에 발생할 수 있는 정상, 비정상(사고), 전력품질에 대한 9개의 항목으로 전력용량, 전기방식, 역률, 뱅크 역조류, 상시전압변동, 순시전압변동, 플리커, 단락용량, 연계가능용량 등이며, 분산형전원의 배전계통에의 연계 적합 여부를 종합적으로 판단하는 시스템이다.

• Journal of Power Electronics
• /
• v.17 no.3
• /
• pp.725-732
• /
• 2017

This paper proposed a real-time, low-cost, fast transistor open-circuit fault diagnosis method for voltage-source inverter fed induction motors. A transistor open-circuit changes the symmetry of the inverter topology, leading to different similarities among three phase load currents. In this paper, dynamic time warping is proposed to describe the similarities among load currents. The proposed diagnosis is independent of the system model and needs no extra sensors or electrical circuits. Both simulation and experimental results show the high efficiency of the proposed fault diagnosis method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.77-86
• /
• 2020

Power quality problems caused by feeder voltage drop and extension construction cost problems can occur with the increasing utilization rates of the existing fixed-type EV (electric vehicle) charger. Moreover, EV users might not be able to access the EV charger due to a lack of EV charging facilities. Therefore, this paper proposes an MPSD (movable power supply device) for EVs to overcome user inconvenience caused by the insufficient number of chargers and extension cost issues. The proposed MPSD was mainly composed of a PV (photovoltaic) system, ESS (energy storage system), EV charging system, and monitoring and control system. Furthermore, there are three operation modes available to enhance the flexibility of the MPSD application, depending on the situation. This paper also presents an economical evaluation modeling using the present worth method to consider the cost and benefit elements. The simulation results based on proposed modeling showed that MPSD is more economical than the existing EV charger. Moreover, its profit can be increased significantly depending on the distance to the installation point.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.6
• /
• pp.495-499
• /
• 2020

Power factor improvement at high temperatures has been a major research topic for the development of skutterudite thermoelectric materials. Here, we attempted to optimize the process parameters for manufacturing skutterudite materials, especially for p-type systems. We focused on the effect of aging time variation to maximize the high-temperature performance of the Ce-filled Fe³CoSb¹² skutterudite system. The optimized aging time was concluded to be a key parameter for the formation of single-phase nanostructures in this p-type skutterudite system. The optimized condition was effective in reducing the bipolar effect at high temperature ranges by increasing the carrier concentration in the p-type system. To confirm the conclusions, the electrical conductivity, Seebeck coefficient, and power factor were measured. The results matched well with the microstructure and with those of an XRD analysis performed for the system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.10
• /
• pp.2450-2456
• /
• 2015

In this paper, we propose a real-time remote monitoring system for distributed solar power generation system. The proposed system consists of PVC, UTC, OTC and monitoring server. PVC collects the operational information from the PV's inverter via serial interface. The sensing data is transmitted to the server by wireless communications and stored in the DB server. The PV's status is monitored via UTC, and the operating of PVC and UTC are managed by OTC. In addition, by providing information about the power generated by PV system and failure diagnosis in real time, the proposed system shows the possibility of reducing the maintenance costs and improved failure recovery time.

• Journal of Korean language education
• /
• v.25 no.1
• /
• pp.83-113
• /
• 2014

This study aims to examine the change of strategy use by analyzing the refusal sequence of beginner Japanese Korean learners by time difference of 10 weeks. The results of the study are as follows; First, in the solidarity system of politeness(power-, distance-), learners showed similar ability as native Koreans after 10 weeks. Second, in the deference system(power-, distance+), there was a difference according to the situational burden when using strategies. In the invitational setting, the learners sought justification for their refusal or tried to negotiate by explaining in detail as time passed. However, in the request setting, they showed no will to compromise by refusing directly and leading the listener to give up. Third, similar difference was found in the use of strategies depending on the situational burden in the hierarchical system(power+, distance+). While learners could present their justification for refusal by showing their interest in the invitation as time passed in the invitation setting, they expressed straight refusal and were not willing to negotiate in the request setting.

• Journal of Engineering Education Research
• /
• v.22 no.6
• /
• pp.74-88
• /
• 2019

In recent years, the design has formed and operated convergence education in conjunction with many other academic fields, and ABEEK also encourages the participation of convergence engineering programs. The purpose of this study is to require design and software convergence major to operate program that accord engineering education certification criteria to develop a program outcomes evaluation system and examine its validity. The program outcomes evaluation system was developed in accordance with development research methods and procedures. As a result, developed evaluation system program outcomes for convergence-based program outcomes: convergence ability, creative thinking ability, entrepreneur ability, and design ability. Finally, it revised and supplemented them through expert validity examine. Expert validity review included 9 experts in engineering, IT engineering, education technology, and design. The validity, usefulness, intelligibility, universality, and explanatory power of the evaluation system were reviewed. The results of this study are expected to provide practical tools for operating ABBEK of convergence programs between design and engineering.