• Journal of Food Hygiene and Safety
• /
• v.22 no.4
• /
• pp.338-345
• /
• 2007

This study surveyed on the actual conditions of using sanitizers and disinfectants for improvements of sanitization on food utensils at 105 school and 20 industry foodservice operations. The questionnaire which was administered to 125 foodservices was used as a mail or visitation method. The answers of asking "Perception on temporary authorization system of sanitizers and disinfectants on food utensils" were 75% in contract managed school foodservices, 81.8% in self operated school foodservices, and 50% in industry. Main factors to choose sanitizers were sterilizing power (38.6%, 28.6%, 38.9%) and safety (32.6%, 46.1%, 33.3%) at every foodservices. Keeping ratio of sanitizers and disinfectants guidelines in contract managed school, self operated school and industry foodservices were 64.8%, 52% and 73.7%, respectively. If easy and practical guideline is developed, most foodservices replied to use if for disinfection of foodservices. Most of the foodservices were not only knowing sanitizers and disinfectants but also possessing a guideline. However, they didn't perform disinfection according to the guideline due to its complexity. Consequently, we suggest that it is necessary to provide an easy and practical "sanitizers and disinfectants guideline" and useful information.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.10 no.4
• /
• pp.267-273
• /
• 1977

Rainbow trout were reared in a small indoor aquarium which was equipped with a simple recirculating biofilter combined with a small amount of inflowing water for 199 days from April 25 to November 10, 1977 in Busan where very hot summer air temperature is encountered, and results obtained were promissing as following; 1. The aquarium has dimensions of $1m\;\times\;1m\;\times\;67cm(depth)$, and a bottom center sedimentation chamber of conical type through which out-flowing water is pushing fecal matter and other detritus outward. The conical sedimentation chamber measures 20 cm depth and 20 cm diameter at its upper mouth and tapers to the bottom end which is connected to 4 cm diameter draining pipe. The draining pipe goes through under the tank and then is elevated on the side. The water depth was maintained at about 40 cm depth by adjusting the heigh of draining pipe. The filter bed contained 16 l of $3\~5\;mm$ zeolite gravels, and water circulation rate was about 1030 l/hr. 2. Continuous inflowing water resulted in a good elimination of waste materials through its outflowing water thus reducing waste loading in the filter. 3. Mean temperature of water in the rearing aquarium containing about 400 l water volume was maintained at around 20 to $22^{\circ}C$ by 0.59 l/min of the inflowing well water which usually maintained the temperature of $17^{\circ}C$ during the hot summer season from the first of July to the first of October when the 10-days-mean air temperature ranged from $20^{\circ}\;to\;27.3^{\circ}C$ $(total\;mean\;24.6^{\circ}C) $ and under this condition the fish continued normal growth. 4. The production per 1 l/min of inflowing water with this simple biofilteration reached 30 hg. 5. The total cost including all feed and power during this experimental rearing period fell well within the economic establishment and if the feed and filteration system are improved the benefit-cost ratio will be much increased.

• Applied Biological Chemistry
• /
• v.48 no.1
• /
• pp.23-33
• /
• 2005

Agricultural sciences field in South Korea has many strong points such as numerous researchers, establishment of research infra-structure, excellence in research competitiveness and high technological level. However, there are also many weaknesses including insufficient leadership at related societies and institutes, deficiency of the next generation research group, and insufficiency in research productivity. There are many opportunities including increasing the importance of the biotechnological industry, activating international cooperation researches, and exploring the multitude of possible research areas to be studied. However, some threats still exist, such as pressure from the government of developed countries to open the agricultural market, the decrease of specialized farms, and intensification for researches to gratify economic and social demands. To encourage research activities in the agricultural sciences field in Korea, the following actions and systems are required: 1) formulation of a mid- and a long-term research master plan, 2) development of a database on the man power in related fields, 3) activation of top-down research topics, and associated increase of individual research grants, 4) development of special national programs for basic researches in agricultural sciences, 5) organization of a committee for policy and planning within the related societies, and 6) system development for the fair evaluation of the research results.

• Microbiology and Biotechnology Letters
• /
• v.40 no.4
• /
• pp.414-418
• /
• 2012

The quantity of research on microbial fuel cells has been rapidly increasing. Microbial fuel cells are unique in their ability to utilize microorganisms and to generate electricity from sewage, pig excrement, and other wastewaters which include organic matter. This system can directly produce electrical energy without an inefficient energy conversion step. However, with MFCs maximum power production is limited by several factors such as activation losses, ohmic losses, and mass transfer losses in cathodes. Therefore, electron acceptors such as nitrate and ferric ion in the cathodes were utilized to improve the cathode reaction rate because the cathode reaction is very important for electricity production. When 100 mM nitrate as an electron acceptor was fed into cathodes, the current in single-cathode and dual-cathode MFCs was noted as $3.24{\pm}0.06$ mA and $4.41{\pm}0.08$ mA, respectively. These values were similar to when air-saturated water was fed into the cathodes. One hundred mM nitrate as an electron acceptor in the cathode compartments did not affect an increase in current generation. However, when ferric ion was used as an electron acceptor the current increased by $6.90{\pm}0.36$ mA and $6.67{\pm}0.33$ mA, in the single-cathode and dual-cathode microbial fuel cells, respectively. These values, in single-cathode and dual-cathode microbial fuel cells, represent an increase of 67.1% and 17.6%, respectively. Furthermore, when supplied with ferric ion without air, the current was higher than that of only air-saturated water. In this study, we attempted to reveal an inexpensive and readily available electron acceptor which can replace platinum in cathodes to improve current generation by increasing the cathode reaction rate.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.12
• /
• pp.913-921
• /
• 2011

This study examined the overall feasibility of low carbon green village formed in rural area. The check method is analyzing its environmental and economic feasibility and energy self-reliance. The biomass of the villages was set as 28 ton/day of livestock feces and 2 ton/day of cut fruit tree branches which make up the total of 30 ton/day. The facility consisted of a bio gasfication facility using wet (livestock feces) biomass and combined heat power generator, composting facility and wood boiler using dry (cut fruit tree branches) biomass. When operating the system, 540,540 kWh/yr of electricity and 1,762 Gcal/yr of heat energy was produced. The region's electricity energy and heat energy self-reliance rate will be 100%. The economic feasibility was found as a loss of 140 million won where the facility installation cost is 5.04 billion won, operation cost is 485.09 million won and profit is 337.12 million won. There will be a loss of about 2.2 billion won in 15 years but in the environmental analysis, it was found that crude replacement effect is about 178 million won, greenhouse gas reduction effect is about 92 million won making up the total environmental benefit of 270 million won. This means, there will be a yearly profit of about 130 million won. In terms of its environmental and economic feasibility and energy self-reliance, this project seemed to be a feasible project in overall even if it manages to get help from the government or local government.

• Proceedings of the KOSOMBE Conference
• /
• v.1992 no.05
• /
• pp.27-47
• /
• 1992

Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

• Korean Security Journal
• /
• no.22
• /
• pp.91-111
• /
• 2010

Around the middle of the ninth century the strict bone-rank system of Silla frustrated many people who had political ambition but lacked nobility. They had to seek other ways, including maritime trade. Such an undertaking reflected and also increased their economic and military power. Trade prospered with T'ang China and with Japan as well. The threat of piracy to Silla's thriving maritime trade caused to create a succession of garrisons at important coastal points. Chonghae Jin (Chonghae garrison) was regarded as the most important of these. It was established in 828 by Chang Pogo. Chonghae Jin was on Wando, an island just east of the southwestern tip of Korea and a key place at this time in the trade between China, Korea, and Japan. From this vantage point Chang Pogo became a merchant-prince with extensive holdings and commercial interests in China and with trade contacts with Japan. Although piracy was rampant in East Asia at that time, either the Chinese or Silla government was not able to control it due to inner political strife and lack of policing resources. Infuriated by the piracy and the government's inability to control it, Chang Pogo came back to Silla to fight against the pirates and to protect maritime trade. He persuaded the king of Silla and was permitted to control the private armed forces to sweep away the pirates. In 829 he was appointed Commissioner of Chonghae-Jin with the mission of curbing piracy in that region. Chang's forces were created to protect people from pirates, but also developed into traders among Silla Korea, T'ang China, and Japan in the 9th century. This was geographically possible because the Chonghae Garrison was situated at the midpoint of Korea, China, and Japan, and also because Chang's naval forces actually dominated the East Asia Sea while patrolling sea-lanes. Based on these advantages, Chang Pogo made a great fortune, which might be collected from a charge for protecting people from pirates and the trades with China and Japan. Chang's forces could be termed the first private security company in the Korean history, at least in terms of historical documents. Based on historical documents, the numbers of private soldiers might be estimated to exceed tens of thousands at least, since Chang's forces alone were recorded to be more than ten thousand. Because local powers and aristocratic elites were said to have thousands of armed forces respectively, the extent of private forces was assumed to be vast, although they were available only to the privileged class. In short, the domination of Chang's forces was attributable to the decline of central government and its losing control over local powers. In addition it was not possible without advanced technologies in shipbuilding and navigation.

• Korean Security Journal
• /
• no.44
• /
• pp.85-116
• /
• 2015

Found in 23 Dec 1953 to cope with illegal fishing of foreign ships and coastal guard duty, Korea Coast Guard was re-organized as an office under Ministry of Public Safety since the outbreak of sinking of passenger ship "Sewolho". In the course of re-organization, intelligence and investigation duty were transferred to Police Department except "Cases happened on the sea". But the definition of intelligence duty is vague and there are lots of disputes over the jurisdiction and range of activities. With this situation in consideration, the object of this study is to analyse legal and institutional characteristic of KCG Intelligence, to compare them to that of Police Department, foreign agencies like Japan Coast Guard and US Coast Guard, to expose the limit and to suggest solution. To summarize the conclusion, firstly, in the legal side, there is no legal basis on intelligence in [The Government Organization Act], no regulation for mission, weak basis in application act. Secondly, in the institutional side, stated in the minor chapter of [The Government Organization Act], 'the cases happened on sea' is a quite vague definition, while guard, safety, maritime pollution duty falls under 'on the sea' category, intelligence fell to 'Cases happened on the sea' causing coast guard duty and intelligence have different range. In addition, reduced organization and it's manpower led to ineffective intelligence activities. In the case of Police Department, there is definite lines on 'administration concerning public security' in [The Government Organization Act], specified the range of intelligence activities as 'collect, make and distribute information concerning public security' which made the range of main duty and intelligence identical. Japanese and US coast guards also have intelligence branch and performing activities appropriate for the main missions of the organizations. To have superiority in the regional sea, neighboring countries Japan and China are strengthening on maritime power, China has launched new coast guard bureau, Japan has given the coast guard officers to have police authority in the regional islands, and to support the objectives, specialized intelligence is organized and under development. To secure maritime sovereignty and enhance mission capability in maritime safety duty, it is strongly recommended that the KCG intelligence should have concrete legal basis, strengthen the organization and mission, reinforce manpower, and ensure specialized training administrative system.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.48-59
• /
• 2018

This study was conducted to suggest the effective management and recycling processes of coffee waste, which can be easily obtained from coffee shops and coffee-related products industries. Prior to the fabrication of pellets, the potential of coffee waste as a raw material of pellet was investigated through the examination of its chemical compositions and fuel characteristics. Major gradient included in coffee waste was holocellulose, followed by fat/oil and protein. Coffee waste contained a small quantity of ash (0.7%), such as calcium, sodium, potassium and magnesium. Interestingly, coffee waste was easily dried probably due to its porous structure. Pellets fabricated with coffee waste and larch sawdust showed good fuel characteristics, such as moisture content, ash content, density and durability. The pellets exceed greatly the minimum requirements of $1^{st}$-grade wood pellet standard designated by National Institute of Forest Science (NIFOS). Particularly, the high calorific value of coffee waste showed the potential as a raw material of pellet. However, owing to high nitrogen and sulfur contents, coffee waste is like to be used as a raw material of wood pellet for combined heat and power plants equipped with a reduction system of $NO_x$ and $SO_x$ gases. On the other hand, 91 wt% larch sawdust and 9 wt% coffee waste are required to fabricate the $1^{st}$-grade wood pellets designated by NIFOS. Pellets fabricated with the conditions are estimated to have nitrogen content of 0.298% and sulfur content of 0.03%. Lastly, if amounts of coffee waste and sawdust in the production of wood pellets are adequately adjusted according to its purchasing price, the manufacturing cost of pellet can effectively be reduced. In addition, it is expected tp prepare the effective recycling process of waste and to relieve the environmental burden with the reduction of waste from the commercialization of coffee waste/larch pellets.

• Journal of Sericultural and Entomological Science
• /
• v.15 no.2
• /
• pp.9-14
• /
• 1973

In order to find out effects of the generative power of silk worm moth which have been brought up in the high temperature accommodation at their pupa stage. For this specific study, 9 different kinds of male silk worms have been selected as specimen. All those specimen were brought up in the normal temperature at their larvae stage and after the pupation period they have been accommodated in the condition of high temperature for a certain length in accordance with the study programme. Afterwards, those mlae specimen were copulated with Suwon jam 103${\times}$104 which were all brought up in normal conditions. This study was carried out to find the copulation function as well as the ratio of unfertilized eggs(male sterility test). Results of study have been revealed as follows: 1) Although some differences were observed, male pura which have been brought up in the condition of high temperature shown the low rate of unfertilized eggs rather than those were brought up in the normal conpition. 2) In this group the eclosion(emergency) has been found to be poor rather, than those specimen brought up in normal conditions. 3) The copulation function of Moran, Daedong, J124 and C108 specimen were found to be poor than those of Suwon jam. 4) Fertility rate of Moran, Daedong, J124 and C108 was found to be around 65%. This figure is rather lower than what we normally expect. 5) Unfertilized egg ratio of Moran, Daedong and C108 were found to be around 20% if they were brought up in the condition of high temperature for one day from the time of pupation: 40% at 2 days, and 70% at 3 days duration. More than 3 days treatment has shown no progress in the unfertilized egg ratio. 6) One day's treatment for the pupa at the later stage has shown the unfertilized egg ratio of about 10%; 20% at 2 day's treatment, 35% at 3 day's treatment, 40-60% at 4 day's treatment, more than 60% at 5 day's treatment, and the 70% of fertilized egg ratio was only observed when the treatment days come to 7 days. It was understood that the unfertilized egg ratio was high at the antepupa stage rather than that of post-pupa stage. 7) According to the result of observation the sperm in copulatory pouch and seminal receptacle out of the normal female silk worm which have been copulated with the male brought up in the condition of high temperature at their moth stage. The reproduction system found in the control zone has been found to be normal and the sperm is amountful and active in motion while the sperm found in the treatment to be limited in amount and slow in motion. The observation was made within 5 hours from the copulation. 8) According to the result of observation of sperm of seminal receptacles of the female silkworm moth, and according to that observation of sperm in the seminal receptacle in female silkworm moth, the amount of sperm and mobility in the female moth brought up in high temperature were poor comparing that were brought up in normal temperature zone. Some of them are even found to be no trace of such. 9) Appearance and mosle of the copulatory organ of the male silkworm moth was found to be no anatomical change. 10) Testis of the later pupa stage which was brought up in the high temperature was found to be almost net developed to anucleate sperm and they are degenerated at stage of between maturation division and sperm abnormal stage. Mean time at control zone, the formation of anucleate sperm was already observed.