• 제목/요약/키워드: Power ON/OFF

검색결과 2,085건 처리시간 0.035초

Analysis of Off-Line and On-Line Partial Discharge in High Voltage Motor Stator Windings

  • Kim, Hee-Dong;Kong, Tae-Sik;Lee, Sang-Kil;Kim, Beom-Soo;Kim, Doo-Young
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권3호
    • /
    • pp.1086-1092
    • /
    • 2015
  • The off-line and on-line partial discharge (PD) in the stator winding of three high-voltage (HV) motors (1,400 HP, 6.6 kV) is measured and analyzed in this paper. The off-line PD is measured at high values between 24,300 ~ 36,100 pC after 18 years of motor operation. Spare replacement motors were not available for testing the degree of deterioration of the stator windings in standstill status. Therefore, on-line periodic analysis was conducted to monitor the trend of PD after installing a ceramic sensor (110 pF, 6.6 kV) in the terminal box for each phase of each motor. In the stator winding of the No.1 and No.2 HV motors, which showed high magnitudes of off-line PD and low magnitudes of on-line PD, defects are expected to appear in the neutral end of the winding. On the contrary, in the stator windings of the No.3 HV motor, which exhibits high off-line and on-line PD magnitude, defects are expected to appear in the terminal end of the winding where a voltage close to the phase voltage is applied.

New ZVZCT Bidirectional DC-DC Converter Using Coupled Inductors

  • Qian, Wei;Zhang, Xi;Li, Zhe;Jin, Wenqiang;Wiedemann, Jochen
    • Journal of Power Electronics
    • /
    • 제19권1호
    • /
    • pp.11-23
    • /
    • 2019
  • In this study, a novel zero voltage zero current transition (ZVZCT) bidirectional DC-DC converter is proposed by employing coupled inductors. This converter can turn the main switch on at ZVZCT and it can turn it off with zero voltage switching (ZVS) for both the boost and buck modes. These characteristics are obtained by using a simple auxiliary sub-circuit regardless of the power flow direction. In the boost mode, the auxiliary switch achieves zero current switching (ZCS) turn-on and ZVS turn off. Due to the coupling inductors, this converter can make further efficiency improvements because the resonant energy in the capacitor or inductor can be transferred to the load. The main diode operates with ZVT turn-on and ZCS turn-off in the boost mode. For the buck mode, there is a releasing circuit to conduct the currents generated by the magnetic flux leakage to the output. The auxiliary switch turns on with ZCS and it turns off with ZVT. The main diode also turns on with ZVT and turns off with ZCS. The design method and operation principles of the converter are discussed. A 500 W experimental prototype has been built and verified by experimental results.

GTO의 턴-오프 과도전류와 과도전류가 스위칭에 미치는 영향 (Tail current and its effect on turn-off performance of power GTO thyristor)

  • 장창일;이종;지린견;민원기;김상철;박종문;김은동;김남견
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1998년도 하계종합학술대회논문집
    • /
    • pp.417-420
    • /
    • 1998
  • In this paper the formation mechanism of tail current is analyzed and its effect on GTO turn-off performance is given. The conclusion is that the large tail current will considerably increase the turn-off loss $E_{off}$ and cause the re-triggering during GTO's off-switching, therefore the best design criterion is that the tail current of power GTO must be as low as possible.w as possible.

  • PDF

Evaluation of 0ff-gas Characteristics in Vitrification Process of ion-Exchange Resin

  • Park, S. C.;Kim, H. S.;K. H. Yang;C. H. Yun;T. W. Hwang;S. W. Shin
    • Nuclear Engineering and Technology
    • /
    • 제33권1호
    • /
    • pp.83-92
    • /
    • 2001
  • The properties of off-gas generated from vitrification process of ion-exchange resin were characterized. Theoretical composition and flow rate of the off-gas were calculated based on chemical composition of resin and it's burning condition inside CCM. The calculated off-gas flow rate was 67.9Nm$^3$/h at the burning rate of 40kg/h. And the composition of off-gas was avaluated as $CO_2$(41.4%), steam(40.0%), $O_2$(13.3%), NO(3.6%), and SO$_2$(1.6%) in order. Then, actual flow rate and composition of off-gas were measured during pilot-scale demonstration tests and the results were compared with theoretical values. The actual flow rate of off-gas was about 1.6 times higher than theoretical one. The difference between theoretical and actual flow rates was caused by the in-leakage of air to the system, and the in-leakage rate was evaluated as 36.3Nm$^3$/h. Because of continuous change in the combustion parameters inside CCM, during demonstration tests, the concentration of toxic gases showed wide fluctuation. However, the concentration of CO, a barometer of incompleteness of combustion inside CCM, was stabilized soon. The result showed quasi-equilibrium state was achieved two hours after feeding of resin.

  • PDF

서버 클러스터 환경에서 에너지 절약을 위한 서버 전원 모드 제어에서의 동적 종료 (Dynamic Shutdown of Server Power Mode Control for Saving Energy in a Server Cluster Environment)

  • 김호현;함치환;곽후근;정규식
    • 정보처리학회논문지:컴퓨터 및 통신 시스템
    • /
    • 제2권7호
    • /
    • pp.283-292
    • /
    • 2013
  • 기존 서버 클러스터에서는 고성능을 보장하기 위해, 실시간 요청 수량에 관계없이 모든 서버를 항상 On 한다. 그 방법에서는 QoS를 보장하지만 일부 서버들이 Idle할 때 서버 전력을 낭비하게 된다. 서버들이 소모하는 에너지를 절약하기 위해, 서버가 필요하지 않을 경우 해당 서버의 전력을 Off 하게 하는 서버 전력 제어 방법이 제안되었다. 서버 전력 제어 방법은 서버의 Power가 실제로 어느 시점에 Off 되느냐에 따라 정적인 방법과 동적인 방법이 있다. 정적인 방법에서는 특정 서버가 Off 하기로 결정된 다음 일정 시간 지연 후 그 서버가 Off 된다. 동적인 방법에서는 그 서버에서 수행중인 모든 서비스가 종료된 다음에 해당 서버가 Off 된다. 이는 가변 시간 지연 후 서버가 Off 되는 방법에 해당된다. 정적 종료방식은 단점이 있다. 반복 실험을 통해 수작업으로 최적의 시간 지연을 알아내기 위해서는 많은 시간이 소요된다. 본 논문에서는 정적 종료 방식의 단점을 극복하는 동적 종료 방식을 제안한다. 제안된 방식은 최적의 지연 시간으로 자동적으로 접근하므로 좋은 전력 절약을 하면서 QoS를 보장하는 것을 가능하게 해준다. 30대의 PC 클러스터를 이용하여 실험이 수행되었다. 실험결과는 제안하는 동적 종료 방법이 기존의 정적 종료 방법과 비교할 때 에너지 절감측면에서는 비슷하지만 QoS 측면에서 우수함을 보여준다.

고전력밀도 AC/DC Adapter를 위한 off-time 제어법 (Off-time Control Method for High Power Density AC/DC Adapter)

  • 강신호;장준호;홍성수;이준영
    • 전력전자학회논문지
    • /
    • 제12권6호
    • /
    • pp.510-516
    • /
    • 2007
  • 본 논문에서는 더 높은 에너지 효율을 요구하는 전자 기기들의 사용에 따른 고전력 밀도 AC/DC adapter를 위한 향상된 제어 방법을 제안한다. PFC (Power Factor Correction) 토폴로지는 BCM (Boundary Conduction Mode)제어 방식을 적용한 부스트 토폴로지를 기본으로 하였으며, DC/DC 토폴로지는 50% 고정 duty법과 함께 새롭게 제안된 Off-time 제어법을 적용한 하프브릿지 토폴로지를 기본으로 하였다. 이는 반도체 소자와 마그네틱 소자의 크기를 줄이는데 용이하다. 85W급 AC/DC 어뎁터(18.5V/4.6A)를 설계하여 실험한 결과 90%의 효율과 $36W/in^3$의 전력밀도가 측정되었고 무부하시 전력 손실은 0.5W를 달성하였다.

Uniform Pricing 체계 하에서의 시장지배력과 제약비발전 보상체계 (A Study on Market Power and Compensation for Constrained Off generators under Uniform Pricing Scheme)

  • 신영균;김발호;전영환
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 하계학술대회 논문집 A
    • /
    • pp.649-651
    • /
    • 2003
  • In the framework of competitive electricity market, the Market Power due to the transmission congestion, lack of demand-side response, various uncertain factors etc. have been significant problem. This paper reviews the market rules of Korea power system and the uplift scheme for constrained on/off generators. Then, this paper points out several problems and the mitigation measures of local market power concerning the compensation for constrained-off generators.

  • PDF

4.5kV/1.5kA급 IGCT 설계 및 특성분석 (Design of 4.5kV/1.5kA IGCT)

  • 김형우;김상철;서길수;김은동
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
    • /
    • pp.357-360
    • /
    • 2003
  • In this paper, we designed 4.5kV/1.5kA IGCT devices. GCT thyristor has many superior characteristics compared with GTO thyristor, for examples; snubberless turn-off capability, short storage time, high turn-on capability, small turn-off gate charge and low total power loss of the application system containing device and peripheral parts such as anode reactor and snubber capacitance. In this paper we designed GCT thyristor devices, and analyzed static and dynamic characteristics of GCT thyristor depending on the minority carrier lifetime, n-base thickness and doping concentration of n-base region, respectively. Especially, turn-on and turn-off characteristics are very important characteristics for GCT thyristor devices. So, we considered above characteristic for design and analysis of GCT devices.

  • PDF

대기전력 차단시점 발견을 위한 모델링과 그룹생성 알고리즘 구현 (Modeling for Discovery the Cutoff Point in Standby Power and Implementation of Group Formation Algorithm)

  • 박태진;김수도;박만곤
    • 한국멀티미디어학회논문지
    • /
    • 제12권1호
    • /
    • pp.107-121
    • /
    • 2009
  • 대기전력(Standby power) 소모가 발생하는 첫 번째 요인은 전원에서 IC로 들어오면서 거쳐야하는 기동전압 때문이며 나머지 하나는 IC가 동작할 때의 전류 때문이다. 본 논문에서는 대기전력 상태와 차단 시점의 패턴분석을 통해서 자동 On/Off할 수 있도록 하는 간단한 모듈장치 구성과 알고리즘 적용에 목적을 두었다. 이를 위해서 전력 신호분석과 모델링에 근간을 두었으며 대기전력 절감을 위해서 On/Off 차단기준을 마련했다. On/Off 차단 시점을 찾기 위해서 $1^{st}$ SCS와 $2^{nd}$ SCS의 차분값(subtraction value), 그리고 콘센트로부터 유입된 초당 샘플링 계수에 대한 중간값(median value)을 중요한 파라미터로써 정의한 다음 대기전력 상태에서의 유사그룹 및 유력패턴 그룹 생성 알고리즘을 수행했다.

  • PDF

형광등 안정기의 연속 점등과 ON/OFF시 실제 소비 전력 비교 (Comparison of Real Power between Continuous and ON/OFF Operation of Ballast for Fluorescent Lamps)

  • 이용후;이진우;노재엽
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 1999년도 학술대회논문집-국제 전기방전 및 플라즈마 심포지엄 Proceedings of 1999 KIIEE Annual Conference-International Symposium of Electrical Discharge and Plasma
    • /
    • pp.76-79
    • /
    • 1999
  • This paper describes real power difference continuous and on/off operation of ballast for fluorescent lamps. We tested ballasts for fluorescent lamps, such that glow stater ballast, rapid stating ballast, and electronic ballast. We measured consumed real power. Input voltage is A.C. 220V and ON time 8 is minutes, OFF time 2 is minutes.

  • PDF