• The Korean Journal of Vision Science
• /
• v.20 no.4
• /
• pp.543-551
• /
• 2018

Purpose : The purposes of this study were to evaluate the changes of intraocular pressure according to corneal ablation amount after corneal refractive surgery and the changes of intraocular pressure according to refractive errors before corneal refractive surgery. Methods : The mean age of adults who underwent LASIK corneal refractive surgery were $37.34{\pm}7.42years$, and 108 adults(48 males, 60 females) were participated in this study. Refractive errors, intraocular pressure, and corneal ablation amount were measured using an autorefractor, a noncontact tonometer, and an excimer laser. All test values were considered statistically significant when p<0.05. Results : The mean intraocular pressure before corneal refractive surgery was $15.08{\pm}2.60mmHg$ in males and $14.16{\pm}2.67mmHg$ in females. The decrease of intraocular pressure after corneal refractive surgery were 4.22mmHg in males and 3.61mmHg in females. Spherical equivalent power were $-3.89{\pm}2.17D$ in males and $-4.45{\pm}2.92D$ in females before corneal refractive surgery, and $-0.10{\pm}0.46D$ in males and $-0.04{\pm}0.46D$ in females after corneal refractive surgery. The corneal ablation amount after corneal refractive surgery were statistically significant, with $53.95{\mu}m$ in males and $61.26{\mu}m$ in females. There was significant correlation between corneal ablation amount and decrease of intaocluar pressure(r=0.2299, p<0.001). As the growth of corneal ablation amount in males, the decrease of intraocular pressure was significantly increased. As the growth of refractive error, the amount of decrease in intraocular pressure was also significant. The decrease of intraocualr pressure were $3.04{\pm}2.18mmHg$ in low refractive error, $4.10{\pm}2.16mmHg$ in middle refractive error, and $4.65{\pm}3.29mmHg$ in high refractive error. Conclusion : We found that intraocular pressure decreased after corneal refractive surgery by noncontact tonometer and the change of intraocular pressure which is an important index for glaucoma diagnosis, may affect the judgment of eye disease. We think that a preliminary questionnaire whether corneal refractive surgery is necessary for the measurement of intraocular pressure.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.17-24
• /
• 2019

Purpose: The present study aims to assess the level of coherency and the accuracy of Point dose of the Isocenter of VERO, a linear accelerator developed for the purpose of the Stereotactic Body Radiation Therapy(SBRT). Materials and Method: The study was conducted randomly with 10 treatment plans among SBRT patients in Kyungpook National University Chilgok Hospital, using VERO, a linear accelerator between June and December, 2018. In order to assess the equipment's power stability level, we measured the output constancy by using PTW-LinaCheck, an output detector. We also attempted to measure the level of accuracy of the equipment's Laser, kV(Kilo Voltage) imaging System, and MV(Mega Voltage) Beam by using Tofu Phantom(BrainLab, Germany) to assess the accuracy level of geometrical Isocenter. We conducted a comparative analysis to assess the accuracy level of the dose by using an acrylic Phantom($30{\times}30{\times}20cm$), a calibrated ion chamber CC-01(IBA Dosimetry), and an Electrometer(IBA, Dosimetry). Results: The output uniformity of VERO was calculated to be 0.66 %. As for geometrical Isocenter accuracy, we analyzed the error values of ball Isocenter of inner Phantom, and the results showed a maximum of 0.4 mm, a minimum of 0.0 mm, and an average of 0.28 mm on X-axis, and a maximum of -0.4 mm, a minimum of 0.0 mm, and an average of -0.24 mm on Y-axis. A comparison and evaluation of the treatment plan dose with the actual measured dose resulted in a maximum of 0.97 % and a minimum of 0.08 %. Conclusion: The equipment's average output dose was calculated to be 0.66 %, meeting the ${\pm}3%$ tolerance, which was considered as a much uniform fashion. As for the accuracy assessment of the geometric Isocenter, the results met the recommended criteria of ${\pm}1mm$ tolerance, affirming a high level of reproducibility of the patient's posture. The difference between the treatment plan dose and the actual measurement dose was calculated to be 0.52 % on average, significantly less than the 3 % tolerance, confirming that it obtained predicted does. The current study suggested that VERO equipment is suitable for SBRT, and would result in notable therapeutic effect.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.3
• /
• pp.114-159
• /
• 2012

The Northern Song Dynasty Period (北宋時代) was a drastic transitional era in all aspect of Chinese society including the politico-economic system, ideology and cultural trait. These changes that began in the late Tang (唐) Dynasty Period accomplished in the Northern Song Dynasty. In this phase, the fundamental change influenced in all institutional area; and among them, the capital city planning and its associating building technology to pile stone walls shows one of the significant change of those time. Based on the geographical factor, confluences of many rivers, the Kaifeing (開封) area where the BianLieng palace had developed as a political and economical centre since the Tang Dynasty when the Grand Canal was constructed. According to archaeological researches, the central city structure of Dongjing Walled Town was begun to plan in the late Tang Dynasty and formed in Five Dynasties. The fundamental functional change of city completed in the Midnorthern Song Dynasty. In spite of the relatively late beginning of archaeological investigations to Kaifeng Walled Town and Dongjing Walled Town due to unfavourable natural environment, excavations inaugurated since 1981 have achieved the significant investigations including the actual measurement and excavation to the outer wall, the preliminary excavation to the inner city area, the investigation and excavation to the royal palace of Song and the survey to the royal palace of King Zho in the Ming (明) Dynasty. These surveys have provide important data to reconstruct the 변량 palace, and elucidate the characteristics of city plan in the Dongjing Walled Town and the institutional change of capital city plan of the Northern Song Dynasty. The basic layout of Dongjing Walled Town reflect the realisation of ideality of the late Chinese medieval capital city structure that establish the commercial and economic centre based on the intensification of emperor's power by means of the organisation of ethical institution and the development of commercial economy. Firstly, the central place of the Kaifeng area is encircled with triple walls. This emphasise the authority of emperor located on the summit in the hierarchical ethic system succeeding to the main capital city plan of the late phase of ancient China. Secondly, the location of Dongjing Walled Town was decided by the transport network and the commercial function and defence function. Thirdly, this site shows the change of city structure and landscape of the Northern Song Dynasty. The closed Fengri (坊里: block) system transferred the open Jiexiang (街巷: road) system. Fourthly, the capital city was characterised by the free market trade and the diversification of market place. Fifthly, a convenient transport network in the Bian River, a centre of the Grand Canals, enabled to construct the Kaifeng Walled Town. Therefore, the Northern Song Dynasty continuously accomplished the developed water system as concerning about the utilisation of waterways after the construction of city.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.6
• /
• pp.85-96
• /
• 2018

Developed nations have implemented various policies to reduce greenhouse gases since the 1997 Kyoto Protocol in order to minimize the effects of global warming. Korea should also reduce energy consumption in the industrial sector, and the transportation and building sectors in order to achieve its greenhouse gas reduction target of 37 percent compared to the Business As Usual levels. The government implements various laws and regulations for reducing energy consumption. To reduce energy consumption in the building sector, in particular, the Energy Conservation Design Standards are enforced according to the 'Enforcement Support for Green Building Construction'. The amount of electricity used to maintain room temperature at $28^{\circ}C$ in these buildings have a 30% reduction (measured on the walls and rooftop) in power usage compared to buildings not required to meet these standards. Although the effect of these energy savings on landscaping is proven, this demonstration is not effective for energy saving since it is not a suitable method for the 'Energy Saving Design Standards of Buildings'. For landscaping to be effective as far as a component of energy reduction, the perfusion rate of the building should be calculated based on the thermal conductivity of the component materials for the energy saving designs with respect to the basis of Article 14 of the Green Building Act. Therefore, the purpose of this study is to ensure that the planting-based mats currently being widely used in the landscape industry can have insulating performance suitable for the 'Energy Saving Design Standards' of Buildings according to the 'Enable Green Building Construction Methods'.

• Journal of the Korean Society of Urban Environment
• /
• v.18 no.4
• /
• pp.485-494
• /
• 2018

This study aims to identify the characteristics of oxidation and chemical composition of PM in winter season, 2017 at Incheon area. The mean concentration of air pollutants were $46{\pm}22{\mu}g/m^3-PM_{10}$, $29{\pm}18{\mu}g/m^3/-PM_{2.5}$, $5{\pm}3ppb-SO_2$, $0.56{\pm}0.24ppm-CO$, $21{\pm}13ppb-O_3$ and $28{\pm}17ppb-NO_2$, respectively. The dominant ion of the $PM_{1.0}$ chemical component were organic with $3.2{\mu}g/m^3$ and nitrate with $1.9{\mu}g/m^3$. The day and night variation of the $PM_{1.0}$ chemical components was higher in nighttime than those of daytime. The averaged nitrate oxidation rate (SOR) was 0.06 and sulfate oxidation rate was 0.11 during the field campaign. In the high mass loading period, nitrate oxidation rate (NOR) was up to 0.6 and also the nitrate in $PM_{1.0}$ was increased. The averaged ratio of $NO_x/SO_2$ was 8.7 and nitrate/sulfate was 3.1, respectively. In this results, the nitrate component in $PM_{1.0}$ was influenced by NOx from the stationary source as power plant and the mobile source around the measurement site.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.3
• /
• pp.1-7
• /
• 2021

In this paper, by embedding a bare-die chip-type drive amplifier into the PCB composed of ABF and FR-4, it implements an embedded active device that can be applied in 28 GHz band modules. The ABF has a dielectric constant of 3.2 and a dielectric loss of 0.016. The FR-4 where the drive amplifier is embedded has a dielectric constant of 3.5 and a dielectric loss of 0.02. The proposed embedded module is processed into two structures, and S-parameter properties are confirmed with measurements. The two process structures are an embedding structure of face-up and an embedding structure of face-down. The fabricated module is measured on a designed test board using Taconic's TLY-5A(dielectric constant : 2.17, dielectric loss : 0.0002). The PCB which embedded into the face-down expected better gain performance due to shorter interconnection-line from the RF pad of the Bear-die chip to the pattern of formed layer. But it is verified that the ground at the bottom of the bear-die chip is grounded Through via, resulting in an oscillation. On the other hand, the face-up structure has a stable gain characteristic of more than 10 dB from 25 GHz to 30 GHz, with a gain of 12.32 dB at the center frequency of 28 GHz. The output characteristics of module embedded into the face-up structure are measured using signal generator and spectrum analyzer. When the input power (P_in) of the signal generator was applied from -10 dBm to 20 dBm, the gain compression point (P_1dB) of the embedded module was 20.38 dB. Ultimately, the bare-die chip used in this paper was verified through measurement that the oscillation is improved according to the grounding methods when embedding in a PCB. Thus, the module embedded into the face-up structure will be able to be properly used for communication modules in millimeter wave bands.

• New Physics: Sae Mulli
• /
• v.68 no.12
• /
• pp.1293-1301
• /
• 2018

The basic magnetic properties of commercially available High-$T_c$ Superconductor (HTS) GdBCO-coated conductor (GdBCO-CCs) were investigated by using physical property measurement system-vibrating sample magnetometer (PPMS-VSM). From the zero-field-cooled (ZFC) m(T) curve, the $T_c$ was found to be ~93 K. After removing the background m(H) data, we obtained both the net m(H) data and the ${\Delta}m_{irr}$. The $H_{irr}(T)$ coincided very well with the power-law relation $H_{irr}=H_{irr}(0)(1-T/T_c)^n$ with $$n{\sim_=}1.19$$. The magnetic flux behavior was investigated by using the ${\delta}$ values in the relationship $J_c{\propto}{\Delta}m_{irr}{\propto}H^{-{\delta}}$. A ${\delta}{\approx}0$ region denoting an independent magnetic flux pinning effect, a ${\delta}{\approx}0.6{\sim}1.2$ region representing a collective flux pinning effect due to the interaction, and a ${\delta}{\gg}2$ region representing freely moving magnetic fluxes caused by the Lorentz force were observed. The boundary line between ${\delta}{\approx}0$ and ${\delta}{\approx}0.6{\sim}1.2$ is denoted by a $H_1$, and the one between ${\delta}{\approx}0.6{\sim}1.2$ and ${\delta}{\gg}2$ is denoted by a $H_2$. The ${\delta}(T)$ was obtained in the region of $H_1$ < H < $H_2$. As the temperature was decreased, the ${\delta}$ value gradually decreased.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.271-278
• /
• 2022

This study attempted to prepare basic data for international students with Vietnamese nationality in Korea to identify positive psychological capital, social support, social presence, and quality of life and to prepare support measures to improve their quality of life. Data collection is from May 1, 2021 to June 30, 2021, and was conducted through an online survey for anonymity and convenience. For data analysis, the IBM SPSS/25 statistical program was used, and the significance level for the results was measured as .05, and the reliability of each measurement tool was calculated. The results of this study are summarized as follows. First, the age of the subjects was '24 years old-27 years old', and women accounted for the majority. In the fourth grade, the fourth grade was the most, with "outgoing" personality, "sometimes" experiences of interpersonal conflict, "more than four years and less than five years" in the period of residence in Korea, and the level of Korean proficiency was "grade three." Second, the average quality of life of Vietnamese international students was 3.52 points (out of 5 points), positive psychological capital was 3.98 points (out of 6 points), social support was 2.96 points (out of 4 points), and social presence was 3.59 points (out of 5 points). Third, in the case of the quality of life of Vietnamese international students, there was a significant difference according to their personality, and as a result of post-verification, the quality of life of the 'extroverted' group was higher than the 'mixed' group. There was a significant difference according to interpersonal conflict), and as a result of post-examination, the "no conflict" group had a higher quality of life than the "conflict frequent" group. Fourth, the factors that most affected the subject's quality of life were social support, positive psychological capital, and personality (extroverted). The explanatory power of the model was 33.2%.

• Journal of Life Science
• /
• v.33 no.5
• /
• pp.406-413
• /
• 2023

In this study, the various physiological and anti-inflammatory activities of Sanguisorba officinalis L. roots (SR) were assessed for potential use as functional cosmetic materials. As a result of measuring electron-donating abilities to determine the antioxidant ability of SR extract, activity increased as the concentration increased, showing an excellent antioxidant capacity of 93.8% at a 1,000 ㎍/ml concentration. Further, the antioxidant power of SR extract, which was determined using an ABTS⁺ assay measurement, was more than 99% at concentrations of 50 ㎍/ml or more, while the tyrosinase inhibition rate was 37.7% at the highest concentration of 1,000 ㎍/ml. Consequently, the elastase and collagenase inhibition of SR extract measured 84.9% and 90.3%, respectively, at a 1,000-㎍/ml concentration. As a result of confirming the survival rate of Raw 264.7 cells, the cell survival rate was determined to be 80% or more below a 100 ㎍/ml concentration, and subsequent cell-related experiments were conducted at concentrations below 100 ㎍/ml. Furthermore, after applying a NO assay to identify anti-inflammatory activity, it was confirmed that SR extract had an inhibitory rate of 50.8% at a concentration of 500 ㎍/ml, and it was excellent at suppressing the inflammatory expression. As a result of verifying protein expression by treating SR extract in Raw 264.7 cells, it was confirmed that expression was inhibited concentrated in all factors. Therefore, it is judged that SR can be used as a functional cosmetic material with antioxidant, whitening, and wrinkle-improving physiological effects and anti-inflammatory activities.

• Journal of Venture Innovation
• /
• v.3 no.2
• /
• pp.41-76
• /
• 2020

This study confirmed factors affecting smart factory technology acceptance through empirical analysis. It is a study on what factors have an important influence on the introduction of the smart factory, which is the core field of the 4th industry. I believe that there is academic and practical significance in the context of insufficient research on technology acceptance in the field of smart factories. This research was conducted based on the Unified Theory of Acceptance and Use of Technology (UTAUT), whose explanatory power has been proven in the study of the acceptance factors of information technology. In addition to the four independent variables of the UTAUT : Performance Expectancy, Effort Expectancy, Social Influence, and Facilitating Conditions, Government Assistance Expectancy, which is expected to be an important factor due to the characteristics of the smart factory, was added to the independent variable. And, in order to confirm the technical factors of smart factory technology acceptance, the Task Technology Fit(TTF) was added to empirically analyze the effect on Behavioral Intention. Trust is added as a parameter because the degree of trust in new technologies is expected to have a very important effect on the acceptance of technologies. Finally, empirical verification was conducted by adding Innovation Resistance to a research variable that plays a role as a moderator, based on previous studies that innovation by new information technology can inevitably cause refusal to users. For empirical analysis, an online questionnaire of random sampling method was conducted for incumbents of domestic small and medium-sized enterprises, and 309 copies of effective responses were used for empirical analysis. Amos 23.0 and Process macro 3.4 were used for statistical analysis. For accurate statistical analysis, the validity of Research Model and Measurement Variable were secured through confirmatory factor analysis. Accurate empirical analysis was conducted through appropriate statistical procedures and correct interpretation for causality verification, mediating effect verification, and moderating effect verification. Performance Expectancy, Social Influence, Government Assistance Expectancy, and Task Technology Fit had a positive (+) effect on smart factory technology acceptance. The magnitude of influence was found in the order of Government Assistance Expectancy(β=.487) > Task Technology Fit(β=.218) > Performance Expectancy(β=.205) > Social Influence(β=.204). Both the Task Characteristics and the Technology Characteristics were confirmed to have a positive (+) effect on Task Technology Fit. It was found that Task Characteristics(β=.559) had a greater effect on Task Technology Fit than Technology Characteristics(β=.328). In the mediating effect verification on Trust, a statistically significant mediating role of Trust was not identified between each of the six independent variables and the intention to introduce a smart factory. Through the verification of the moderating effect of Innovation Resistance, it was found that Innovation Resistance plays a positive (+) moderating role between Government Assistance Expectancy, and technology acceptance intention. In other words, the greater the Innovation Resistance, the greater the influence of the Government Assistance Expectancy on the intention to adopt the smart factory than the case where there is less Innovation Resistance. Based on this, academic and practical implications were presented.