• 한국광학회:학술대회논문집
• /
• 한국광학회 1999년도 제16회 광학 및 양자전자 학술발표회Proceedings of 16th Optics and Quantum Electronics Conference, 1999
• /
• pp.216-217
• /
• 1999

A tapered ridge mode laser diode with increased spot size is designed and analyzed . The mode evolution concept is applied to design the taper and the method does not require regrowth or multiple-step etching technique. Three-dimensional BPM results show that the designed taper can transfer more than 97% of the mode power in the active region to the expanded mode.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 동계학술발표회 논문집
• /
• pp.211-212
• /
• 2008

• 전기의세계
• /
• 제31권3호
• /
• pp.226-234
• /
• 1982

DC choppers are usually used to control the DC motor by varying the average value of DC input voltage to the DC motors. In this paper, a chopper circuit is suggested and reconstructed by replacing the free-wheeling diode with the parallel capacitor in the conventional ones. It is demonstrated that this chopper circuit with capacitor can reduce the ripples of the output voltage and current in contrast to those of the chopper with diode, and it can be controlled the output waveforms smoothly at high power demand.

• Current Optics and Photonics
• /
• 제3권6호
• /
• pp.583-589
• /
• 2019

We report experimental results on 940-nm 350-mW AlGaAs/InGaAs transverse single-mode laser diodes (LDs) adopting graded-index separate confinement heterostructures (GRIN-SCH) and p,n-clad asymmetric structures, with improved temperature and small-divergence beam characteristics under high-output-power operation, for a three-dimensional (3D) motion-recognition sensor. The GRIN-SCH design provides good carrier confinement and prevents current leakage by adding a grading layer between cladding and waveguide layers. The asymmetric design, which differs in refractive-index distribution of p-n cladding layers, reduces the divergence angle at high-power operation and widens the transverse mode distribution to decrease the power density around emission facets. At an optical power of 350 mW under continuous-wave (CW) operation, Gaussian narrow far-field patterns (FFP) are measured with the full width at half maximum vertical divergence angle to be 18 degrees. A threshold current (I_th) of 65 mA, slope efficiency (SE) of 0.98 mW/mA, and operating current (I_op) of 400 mA are obtained at room temperature. Also, we could achieve catastrophic optical damage (COD) of 850 mW and long-term reliability of 60℃ with a TO-56 package.

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1646-1649
• /
• 2012

The $O_2$ annealing technique has considerably suppressed the leakage current of GaN power devices, but this forms NiO at Ni-based Schottky contact with increasing on-resistance. The purpose of the present study was to fabricate 1.5 kV GaN Schottky barrier diodes by improving $O_2$-annealing process and GaN buffer. The proposed $O_2$ annealing performed after alloying ohmic contacts in order to avoid NiO construction. The ohmic contact resistance ($R_C$) was degraded from 0.43 to $3.42{\Omega}-mm$ after $O_2$ annealing at $800^{\circ}C$. We can decrease RC by lowering temperature of $O_2$ annealing. The isolation resistance of test structure which indicated the surface and buffer leakage current was significantly increased from $2.43{\times}10^7$ to $1.32{\times}10^{13}{\Omega}$ due to $O_2$ annealing. The improvement of isolation resistance can be caused by formation of group-III oxides on the surface. The leakage current of GaN Schottky barrier diode was also suppressed from $2.38{\times}10^{-5}$ to $1.68{\times}10^{-7}$ A/mm at -100 V by $O_2$ annealing. The GaN Schottky barrier diodes achieved the high breakdown voltage of 700, 1400, and 1530 V at the anode-cathode distance of 5, 10, and $20{\mu}m$, respectively. The optimized $O_2$ annealing and $4{\mu}m$-thick C-doped GaN buffer obtained the high breakdown voltage at short drift length. The proposed $O_2$ annealing is suitable for next-generation GaN power switches due to the simple process and the low the leakage current.

• 한국전자파학회논문지
• /
• 제11권5호
• /
• pp.782-787
• /
• 2000

광대역 고출력 SP3T MMIC GaAs PIN 다이오드 스위치를 설계, 제작하고 특성을 측정하였다. 전력단속능력을 개선시키기 위하여 다이오드의 버퍼층을 저온 버퍼와 초격자 버퍼로 이루어진 2층 구조로 설계하였다. 개발된 다이오드의 항복전압은 65V이고 순방향 정압강하는 1.3V 이었다. MMIC 스위치는 마이크로스트립 라인형으로 구현되었고 인덕턴스가 낮은 via hole 공정을 이용하여 신호를 접지하였다. 평면형 구조보다 더 낮은 기생성분과 진성영역에서 고품질을 갖는 수직형 에피텍셜 PIN 구조를 사용하여 우수한 마이크로파 성능을 얻었다. 제작된 SP3T 스위치의 고출력 특성은 14.5GHz CW에서 입력전력을 8dBm부터 32dBM 까지 증가시킬 때 삽입손실은 0.6dB보다 작은, 분리도는 50dB보다 크게 측정되었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.845-848
• /
• 2009

전력용반도체(Power Management IC)는 전력의 변환이나 제어용으로 최적화되어 있는 전력장치용 반도체 소자로서 전자기기에 들어오는 전력을 그 전자기기에 맞게 변경하는 역할을 하며, 일반 반도체에 비해서 고내압화, 큰 전류화, 고주파수화 되어 있다. 전력용반도체는 전기가 쓰이는 제품에는 다 들어가며, 자동차, 공업제품, 컴퓨터와 주변기기, 통신, 가전제품, 모바일 기술, 대체 에너지 등에 대한 수요 증가가 시장의 성장을 촉진한다. 전력용반도체 개발을 통해 대일무역적자 해소 기여, 취약한 비메모리 산업의 육성을 통한 반도체산업의 균형발전, 신성장동력 창출을 통한 미래 경제발전을 도모할 수 있다. 본 고에서는 반도체 부문의 미래 유망품목인 전력용반도체의 필요성 및 중요성, 시장현황 및 전망을 중심으로 살펴보고 결론에서 정책적 시사점을 도출하고자 한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.413-416
• /
• 1997

In this paper, we propose a new single-stage isolated switching power supply. The proposed converter reduces the diode conduction loss and offer both the high input Power factor and the direction conversion from the ac line to a dc output voltage. This paper present the Operational principle, analysis and control and experimental results of a 100W prototype.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.362-365
• /
• 1999

In this paper, the method of reducing harmonics and correcting of power factor in single PWM converter associated with diode rectifier and boos converter is studied. The ac-dc converter in which the harmonic distortion in the input current is reduced using a third harmonic injected PWM is proposed. A lower switching power loss and easy configuration o control circuit are obtained by adopting discontinuous current mode. Simulation and experimental results of ac-dc converter with 5[KHz] switching frequency are presented and correction of power factor and reduction of total harmonic distortion was established.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2003년도 제25회 학술발표회 초록집
• /
• pp.204-204
• /
• 2003