• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권6호
• /
• pp.316-321
• /
• 2000

In this paper, we proposed MBDD(Modified Binary Decision Diagram) as a multi-level logic synthesis method and a vertex of MBDD to NMOS transistors matching. A vertex in MBDD is matched to a set of NMOS transistors. MBDD structure can be achieved through transformation steps from BDD structure. MBDD can represent the same function with less vertices less number of NMOS transistors, consequently capacitance of the circuit can be reduced. Thus the power dissipation can be reduced. We applied MBDD to a full odder and a 4-2compressor. Comparing the 4-2compressor block with other synthesis logic, 31.2% reduction and 19.9% reduction was achieved in numbers of transistors and power dissipation respectively. In this simulation we used 0.8 ${\mu}{\textrm}{m}$ fabrication parameters.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2002년도 정기학술대회
• /
• pp.387-401
• /
• 2002

The Digital Engineered Safety Feature Actuation System (DESFAS) of nuclear power plants actuates safety systems to mitigate severe accidents occurred in nuclear power plants. The reliability of the system should be evaluated in order to meet the reliability criteria of nuclear power plants. In this work, we have calculated and evaluated the lifetime of DESFAS by using Reliability Block Diagram (RBD) and failure rates of digital control components. Surveillance test is assumed in the evaluation. The result shows that the digital control component can be used in DESFAS system.

• 드라이브 ㆍ 컨트롤
• /
• 제10권2호
• /
• pp.30-36
• /
• 2013

Tractor is a farm vehicle that is designed to provide a high tractive effort at low speed. It is used for versatile agricultural tasks such as hauling a trailer, tillage, mowing and construction work. Most older tractors use a manual transmission. However, as the intensity of work increases, tractors equipped with automatic transmission become popular due to the work convenience. In order to give the operator a large degree of control in field work, 24 gears with automatic 8-speed and manual 3-speed are arranged in transmission. This paper deals with the gear train that is designed for 8-speed automatic transmission by the engagement of multi-disk clutches. The gear ratio for each speed as well as power transmission mechanism is analyzed through velocity analysis. In addition, constraints of mesh gear ratio are derived by investigating the power flow path in velocity diagram for the given 8-speed gear ratio.

• 전기학회논문지
• /
• 제57권11호
• /
• pp.1910-1915
• /
• 2008

The load analysis for the distribution system and facilities has relied on measurement equipment. Moreover, load monitoring incurs huge costs in terms of installation and maintenance. This paper presents a new model to analyze wherein facilities load under a feeder every 15 minutes using meter reading data that can be obtained from a power consumer every 15 minute or a month even without setting up any measuring equipment. After the data warehouse is constructed by interfacing the legacy system required for the load calculation, the relationship between the distribution system and the power consumer is established. Once the load pattern is forecasted by applying clustering and classification algorithm of temporal data mining techniques for the power customer who is not involved in Automatic Meter Reading(AMR), a single-line diagram per feeder is created, and power flow calculation is executed. The calculation result is analyzed using various temporal and spatial analysis methods such as Internet Geographic Information System(GIS), single-line diagram, and Online Analytical Processing (OLAP).

• International Journal of CAD/CAM
• /
• 제7권1호
• /
• pp.91-101
• /
• 2007

To understand the structure of molecules, various computational methodologies have been extensively investigated such as the Voronoi diagram of the centers of atoms in molecule and the power diagram for the weighted points where the weights are related to the radii of the atoms. For a more improved efficiency, constructs like an $\alpha$-shape or a weighted $\alpha$-shape have been developed and used frequently in a systematic analysis of the morphology of molecules. However, it has been recently shown that $\alpha$-shapes and weighted $\alpha$-shapes lack the fidelity to Euclidean distance for molecules with polysized spherical atoms. We present the theory as well as algorithms of $\beta$-shape and $\beta$-complex in $\mathbb{R}^3$ which reflects the size difference among atoms in their full Euclidean metric. We show that these new concepts are more natural for most applications and therefore will have a significant impact on applications based on particles, in particular in molecular biology. The theory will be equivalently useful for other application areas such as computer graphics, geometric modeling, chemistry, physics, and material science.

• 전기학회논문지
• /
• 제63권9호
• /
• pp.1300-1305
• /
• 2014

In this paper, we suggest an optimization method which can save about 5[%] of the cost though the optimizing of configuration and capacity for the facility. To achieve this goal, we compared the design data of the power, motor and drive system with the actual operation data of the plate mill plant in K-Steelworks. Therefore we measured the actual loading data by facilities considering the operating conditions of the plate mill plant in K-Steelworks, after that analyzed these data. In addition, we review the optimal capacity for transformer, switchgear and drive, and also reconfigured the electrical room and power single line diagram through the validation of motor data by equipment and the confirmation of process data considering the load characteristics. Consequently, the optimization method of capacity for the facilities shall have effectiveness in building new plate mill plant to further reduce costs at future.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.419-421
• /
• 2002

This paper presents a methodology for the application of Unified Modeling Language (UML) to develop the new load management system. Development of new load management system in competitive electricity market is very complex since it requires too much data of power system. For the efficient and flexible design to develop of new load management system, a UML approach in applied which is composed of a class diagram, package diagram using Rational Rose Unified Process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.211-213
• /
• 1998

This paper introduces the additional remote monitoring and remote setting functions needed to operate the distribution automation system effectively. we compare the additional functions with the old functions. The remote setting of minimum trip value of fault indicator is an example of additional function. It saves time and line-man's power. Also this paper describes the data transmission flow diagram for operation of distribution automation system using wireless communication method.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2006년도 추계학술발표대회 논문집
• /
• pp.115-120
• /
• 2006

This study concentrates on a new idea that is formulated as a creative space recognition in contemporary architecture and painting. It is stimulated from Deleuze's philosophy, which is expressed with the philosophical instrument, "Non-Representation". After discussing the concept of non-representation used in Deleuze's philosophy, case example in contemporary architecture are analysed to comparatively Investigate the relationship between the architectures by Rem Koolhaas and painting by Francis Bacon. Therefore, he founds expressions of "diagram" and "movement" in painting of F. Bacon. Diagram meansit is a power that is comprised of various points of wiew with the kind experiences that one has in life. Movement that were extracted form the Instrument in space recognition of Deleuze's panting theory were of topology, insertion of geometry, reiteration of layers, transparency and translucency, reflection effect.

• 조명전기설비학회논문지
• /
• 제26권7호
• /
• pp.23-29
• /
• 2012

A single line diagram is a graphic user interface to represent electrical connectivity between power equipments in distribution automation systems. This paper proposes a new single line auto-drawing technique based on the service oriented architecture. Web service, CIM(Common Information Model) and SVG(Scalable Vector Graphics) are adopted to implement SOA concept. A web service demo system was established which is configured with the service provider, consumer and broker to verify the feasibility of this study.