• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.323-328
• /
• 2014

D-MAC protocol is used convergence network, which is designed to connect wireless link between things. This protocol is supported to local data exchange and aggregation among neighbor nodes, and distributed control packet from sink to sensor node. In this paper, we analysis about efficiency of power consumption according to whether or not security authentication of D-MAC in convergence network. If authentication scheme is applied to MAC communication, it is related to power consumption of preamble whether or not with and without authentication process. It is reduced to energy consumption against denial attack of service, when it is applied to authentication. Future work will take the effort to deal with security authentication scheme.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.12
• /
• pp.1730-1738
• /
• 2001

This paper presents an overview of testing and analyzing field performance of a centrifugal chiller which has a rated capacity of 200 RT(703 kW). Field data of a chiller installed in the cleanroom research building of KIST has been collected far performance analysis. The operating data included start-up, shut-down, and quasi-static state where cooling capacity and compressor power consumption varied cyclically. It was found that the steady-state thermodynamic model could be applied to relate the cooling capacity and COP under quasi-static conditions. The results led to finding the required cooling load pattern and a possible energy saving method. This study provides a method of evaluating performance of a large capacity centrifugal chiller in which field test is necessary.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.12
• /
• pp.73-81
• /
• 2019

Titanium alloys have been spotlighted in numerous industries owing to their superior mechanical properties, such as high specific strength. However, the high heat and wear resistance of titanium alloys also lower their machinability and limit the wider application of the material. Many researchers have investigated the processing of titanium alloys, and it is required to evaluate the effectiveness and efficiency of developed technologies. From this perspective, this research studied sustainability in titanium alloy machining. The power consumption of the machine was measured during the process and analyzed in terms of process parameters and individual machine components. Here, an end mill specially designed for titanium was also investigated and compared with a general-purpose cutting tool. Based on the experimental results, a model was constructed to predict the power consumption of the overall process. It is expected that this study will contribute to the more effective and efficient processing of titanium alloys.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.612-618
• /
• 2009

Recently the roles of railways about the prevention of global warming caused by greenhouse gases and for low carbon green growth are larger than ever. And the railroad-related research institutions have been active in researching for energy conservation. Especially the urban railroad has been emerged as the best means of transportation compared to the general public transportation systems in punctuality, stability, ecology and etc. In operating the urban railroad system there are various ways for energy savings. In the larger category, One is the hardware aspect according to the structure of the vehicle and the development of control systems. The other is the software aspect which efficient train operation can be made through control of driving patterns and driving diagram. In this paper, there is sense to analyze the result in verifying expectation relation with variable and the use of electric power on this after selecting main variables that can influence to the energy of the train operation in the software aspect. First, after collecting the basic data related to operation(train speed, operating hours, power consumption, the position of stopping station, electrical power system etc.) and according to this, investigating the consumption of the energy of the operation, in the side of energy consumption deducing and analyzing problem, this will be found solutions.

• Journal of the Korean Home Economics Association
• /
• v.46 no.8
• /
• pp.121-133
• /
• 2008

The purpose of this study was to decipher the BRQ (Brand Relationship Quality) Construct of fashion product consumers and to identify influencing variables. Consumption values of consumers, fashion product attributes and marketing communication instruments were investigated as affecting variables. A questionnaire was distributed to 350 women between the age of 20 and 50 living in Seoul and other metropolitan areas from Mar. 5 to Mar. 18, 2008. Collected data were analyzed by factor analysis, reliability, multiple regression, frequency and percentage using SPSS (Version 15,0) statistical Package. The results were as follows: Firstly, the BRQ Construct of fashion product consumers was proved to be composed of five factors; 'self-connective love', 'pursuing symbol', 'trust', 'intimacy', and 'knowledge'. Secondly, consumption values had a significant effect on the BRQ Construct and their explanatory power was 32%, 'Epistemic value' was the most significant variable affecting BRQ. 'Functional value' had a significant influence on some BRQ factors. Thirdly, explanatory power of fashion product attributes affecting BRQ was 45%. 'Aesthetic attribute' had significant effect on all BRQ factors, while 'functional attribute' showed significant effect on only 'pursuing symbol', 'trust', and 'intimacy'. Finally, marketing communication mixes showed 21% explanatory power and 'word of mouth' and 'display' among marketing communication mixes were found as the most influential variables affecting the BRQ Construct.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.6
• /
• pp.61-69
• /
• 2014

Various Time Synchronization protocols considering for the characteristics of WSN(Wireless Sensor Network) have been developed, because a time relationship plays an important role in many WSN applications, as well. Synchronization accuracy as well as constraints of energy should be considered for WSN Time Synchronization protocols, especially. In this paper, I analyze Time Synchronization protocols for WSN after classifying these protocols with a new criteria (i.e. power consumption). So, this method will contribute to evaluating and comparing WSN Time Synchronization protocols in respect of power consumption.

• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.430-438
• /
• 2021

The spatial distribution of neutron flux or reaction rate was calculated by cell or mesh tally in traditional Monte Carlo simulation. However, either cell or mesh tally leads to the increase of memory consumption and simulation time. In this paper, the function expansion tally (FET) method was developed in Reactor Monte Carlo code RMC to solve this problem. The FET method was applied to the tallies of neutron flux distributions of uranium block and PWR fuel rod models. Legendre polynomials were used in the axial direction, while Zernike polynomials were used in the radial direction. The results of flux, calculation time and memory consumption of different expansion orders were investigated, and compared with the mesh tally. Results showed that the continuous distribution of flux can be obtained by FET method. The flux distributions were consistent with that of mesh tally, while the memory consumption and simulation time can be effectively reduced. Finally, the convergence analysis of coefficients of polynomials were performed, and the selection strategy of FET order was proposed based on the statistics uncertainty of the coefficients. The proposed method can help to determine the order of FET, which was meaningful for the efficiency and accuracy of FET method.

• Journal of Biosystems Engineering
• /
• v.39 no.2
• /
• pp.69-75
• /
• 2014

Purpose: This paper is aimed at analyzing the heating performance of the vertical closed loop type Geothermal Heat Pump System (GHPS) distributing the farm site and providing basic data of the GHPS. Method: Seedling greenhouse heating was made from October 2012 to May 2013. The seedling greenhouse was divided into 4 sectors (A, B, C and D zone, total $3,300m^2$) with different temperatures. It was heated from 5PM to 8AM, and during the night the greenhouse was covered by non-woven fabric thermal curtains along the upper 2m of the greenhouse for temperature maintenance. In order to analyze the heating performance of the GHPS, power consumption and operating time of the GHPS, inlet and outlet water temperature of the condenser, temperatures of each zone of the greenhouse, and ambient temperature were measured. Results: When operating only one heat pump unit, heat generated in the condenser decreased as the experiment progressed and power consumption increased correspondingly. However, the heating coefficient of performance decreased from 3.3 to 2.0 rapidly. Also, when operating two heat pump units, heat generated in the condenser decreased and power consumption increased. Heating coefficient of performance decreased from 4.5 to 3.7 rapidly. When the set temperature of the greenhouse was $13.7{\sim}20.1^{\circ}C$ and minimum ambient temperature was $-20.8{\sim}4.8^{\circ}C$, the annually accumulated heat and power consumption were 520,623 kW, 142,304 kW, respectively. Conclusion: When the set temperature of the greenhouse was $13.7{\sim}20.1^{\circ}C$ and the minimum ambient temperature was $20.8{\sim}4.8^{\circ}C$, the annually accumulated heat and power consumption were 520,623 kW, 142,304 kW, respectively. When operating only one heat pump unit, the heating COP was 2.0~3.3, and when operating 2 heat pump units, it was 3.7~4.5. If several heat pumps are installed in one GHPS, it is suggested that all heat pumps be operated except in special cases. Because the scale of the water pumps are set to the scale of when all heat pump units are operating, if even one unit is not operating, the power consumption will increase. That becomes the cause of COP decrease.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.3
• /
• pp.13-18
• /
• 2017

In this paper, We Numerically Analyze the Performance of the 802.11 Power Save Multi-Poll (PSMP) Operation. From the Analysis, we have Power Saving Efficiency Indicating how much time is Used for Power Consumption Over the Entire Operation Time. Consequently, we can Estimate the Operational Efficiency of the PSMP Operation.

• Nuclear Engineering and Technology
• /
• v.54 no.4
• /
• pp.1301-1311
• /
• 2022

Global climate change brings environmental quality sensitivity, especially in developed countries. Developed countries use non-renewable energy sources intensively both in their own countries and in other countries, they make productions that cause an enormous rate of increase in CO₂ emissions and unsustainable environmental costs. This has increased the interest in environmentally friendly alternative energy sources. The aim of this study is to investigate the impact of nuclear energy consumption and technological innovation on environmental quality in G7 countries using annual data over the period 1970-2015. The Panel Threshold Regression Model was used for the analysis. Empirical findings have indicated that the relationship between nuclear energy consumption and carbon emissions differs according to innovation for nuclear power plants. It was also concluded that nuclear energy consumption reduces carbon emissions more after a certain level of innovation. This result shows that the increase in innovative technologies for nuclear power plants not only increases energy efficiency but also contributes positively to environmental quality.