• The Journal of the Acoustical Society of Korea
• /
• v.24 no.5
• /
• pp.255-261
• /
• 2005

In this paper. experiments are conducted to extract a set of non-Parametric warping functions to examine the characteristics of the warping among speakers' utterances. For this Purpose. we made use of MFCC and LP spectra of vowels in choosing reference spectrum of each vowel as well as representative spectra of each speaker. These spectra are compared by DTW to give the warping functions of each speaker. The set of warping functions are then defined by clustering the warping functions of all the speakers. Noting that male and female warping functions have shapes similar to Piecewise linear function and Power function respectively, a new hybrid set of warping functions is defined. The effectiveness of the extracted warping functions are evaluated by conducting phone level recognition experiments, and improvements in accuracy rate are observed in both warping functions.

• Journal of Digital Contents Society
• /
• v.9 no.2
• /
• pp.325-330
• /
• 2008

Production and distributon of UCC prepared User of UCC. Power law of participation is available tool for analysis of UCC user. We can devide collective intelligence and collaborative intelligence through power law of participation. We can analyze relation of paticipant and departmentalize type of participation, Power law of participation is available tool for platform design of production and distribution.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.10
• /
• pp.49-55
• /
• 2008

This paper presents a novel evaluation method of life expectancy of power system equipment. The life expectancy means expected remaining lifetime; it can be usefully utilized to maintenance planning, equipment replacement planning, and reliability assessment. The proposed method is composed of three steps. Firstly, a cumulative probability for future years is evaluated for targeted age year. Secondly, the cumulative probability is modeled by well-blown cumulative distribution function(CDF) such as Weibull distribution. Lastly, life expectancy is evaluated as the mean value of the model. Since the model CDF is established in the proposed method, it can also evaluate the probability of equipment retirement within specific years. The developed method is applied to examples of generators of combined cycle power plants to show its effectiveness.

• The Korean Journal of Applied Statistics
• /
• v.21 no.6
• /
• pp.1065-1075
• /
• 2008

For the model validation of credit rating models, Kolmogorov-Smirnov(K-S) statistic has been widely used as a testing method of discriminatory power from the probabilities of default for default and non-default. For the credit rating works, K-S statistics are to test two identical distribution functions which are partitioned from a distribution. In this paper under the assumption that the distribution is known, modified K-S statistic which is formulated by using known distributions is proposed and compared K-S statistic.

• Journal of the Korean Chemical Society
• /
• v.57 no.2
• /
• pp.300-305
• /
• 2013

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.697-700
• /
• 2006

저수시 하천유량(Low Streamflow)의 추정은 하천의 수질관리, 용수공급계획, 댐 방류계획등의 수자원관리에 있어서 매우 중요한 부분이다. 이러한 중요성에 따라 Vogel과 Kroll (1989)은 저수시 하천유량을 추정하기 위한 여러 가지 확률분포함수를 제안하였다. 가장 흔히 제안되어지는 이변수 확률분포(Two-Parameter Distribution)로는 Lognormal 분포와 Weibull 분포가 있으며 이와 더불어 Three-Parameter Lognormal, Three-Parameter Weibull, Log Person Type Ⅲ 분포도 널리 사용되어진다. 그러나 이러한 여러 가지 확률 분포함수 중에서 가장 적절한 확률분포의 선택은 저수시 하천유량의 물리적인 측면과는 상관없이 주로 적합도(Gooness of Fit)에 기인된 통계치에 의해서만 결정되기도 하는데 이러한 경우 잘못된 가정을 받아들이는 확률이 높아짐에 따라 추정결과의 신뢰성(Reliability)을 감소시킬 수 있다. 이러한 문제점을 극복하기 위해서 Onoz와 Bayazit (2001)는 Recession Curve를 지수함수로 가정하고 최대 갈수 기간의 길이(Maximum Dry Period Length)의 확률에 대한 이론적인 결과치들을 사용하여 Weibull 분포의 특정한 경우에 해당되어지는 Power 분포를 유도하였으며 유도된 Power 분포의 매개변수를 추정하기 위하여 L-Moment 방법을 사용하였다. 또한 Onoz와 Bayazit (2001) 작은 유출량에서 확률분포와 잘 맞지 않는 경우 작은 유출량값에 작은 가중치를 부여하여 확률분포에 대한 영향을 줄이는 방법인 LL-Moment 방법을 제안하였다. 본 연구에서는 낙동강 유역의 1번부터 5번 소유역에 대해 SSARR 모형을 이용하여 모의한 유출량을 이용하여 Weibull 분포, L-Moment방법에 의해 추정된 매개변수를 사용한 Power 분포, LL-Moment 방법에 의해 추정된 매개변수를 사용한 Power 분포를 적용하였으며 이들 분포의 적합도를 PPCC Test를 사용하여 평가해봄으로써 낙동강 유역에서의 저수시의 유출량 추정에 대한 Power 분포의 적용성을 판단해 보았다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.4
• /
• pp.602-607
• /
• 2006

In this paper, the distributed network synthesis, which is useful to the design of wireless power amplifiers, is proposed, and a RF power amplifier is designed using the technique. The transfer function of distributed matching circuits is derived by Chebyshev approximation, and network element values for a specified topology are given as a function of minimum insertion losses and ripples. As an example, after a power transistor is modeled by load-pull data, the synthesis for distributed matching networks is applied to a power amplifier design, which has the electrical performance of 17dB gain and less IM3 than -43dBc at the 20W output power between 800 to 900MHz frequency range. Experimental results from a fabricated amplifier are shown to approach the design performance in the operating frequency range. The design of impedance matching networks by the transfer function synthesis is a useful method for the design of RF power amplifiers.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.6
• /
• pp.445-452
• /
• 2015

Software reliability in the software development process is an important issue. Software process improvement helps in finishing with reliable software product. Infinite failure NHPP software reliability models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, proposes the reliability model with log and power intensity function (log linear, log power and exponential power), which made out efficiency application for software reliability. Algorithm to estimate the parameters used to maximum likelihood estimator and bisection method, model selection based on mean square error (MSE) and coefficient of determination($R^2$), for the sake of efficient model, was employed. Analysis of failure, using real data set for the sake of proposing log and power intensity function, was employed. This analysis of failure data compared with log and power intensity function. In order to insurance for the reliability of data, Laplace trend test was employed. In this study, the log type model is also efficient in terms of reliability because it (the coefficient of determination is 70% or more) in the field of the conventional model can be used as an alternative could be confirmed. From this paper, software developers have to consider the growth model by prior knowledge of the software to identify failure modes which can be able to help.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.4
• /
• pp.51-58
• /
• 2013

A study on power performance testing of a wind turbine which has no met-mast at a distance of 2~4 rotor diameter was carried out using the Nacelle Transfer Function, NTF, according to IEC 61400-12-2. The wind data for this study was measured at HanKyoung wind farm of Jeju Island. The NTF was modeled using the correlation between wind speeds from the met-mast and from the wind turbine nacelle within 2~4 rotor diameter from the met-mast. The NTF was verified by the comparison of estimated Annual Energy Productions, AEPs, and binned power curves. The Nacelle Power Curve, NPC, was derived from the nacelle wind speed data corrected by NTF. The NPC of wind turbine under test and the power curve offered by the turbine manufacturer were compared to check whether the wind turbine is properly generating electricity. Overall the NPC was in good agreement with the manufacturer's power curve. The result showed power performance testing for a wind turbine which has no met-mast at a distance of 2~4 rotor diameter was successfully carried out in compliance with IEC 61400-12-2.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.9
• /
• pp.28-35
• /
• 2015

In this paper, we propose to identify redundant power states of high-level power model based on clock gating enable signals(CGENs) using dependencies of Boolean functions and structural dependencies of clock gating cells. Three functional dependencies between two CGENs, namely equvalence, inversion, and inclusion, are used. Functions of CGENs in a circuit are represented by binary decision diagrams (BDDs) and the functional relations are used to reduce the number of power states. The structural dependency appears when a clock gating cell drives another clock gating cells in a circuit. Automatic dependency checking algorithm has been proposed. The experimental results show the average number of power state is reduced by 59%.