• 한국염색가공학회지
• /
• 제30권2호
• /
• pp.117-129
• /
• 2018

Cellulose has been widely applied into various medical fields including scaffolding, tissue engineering and tissue formation. In this study, we manufactured cellulose medical fiber from Styela clava tunics(SCT-CS) and analyzed the tensile strength, elongation at break, fluid uptake and surface morphology. And then, the biocompatibility and toxicity of SCT-CS were measured in Sprague-Dawley(SD) rats after the implantation for 30, 60 and 90 days. The level of tensile strength and fluid uptake were lower in SCT-CS than chromic catgut(CCG), while elongation at break level were maintained the higher in SCT-CS. Also, the roughness with pronounced surface patterns as a result of in vivo degradation was significantly greater in CCG than this of SCT-CS although these levels gradually appeared with time in both groups. After implantation for 90 days, SCT-CS and CCG was successfully implanted around muscle of thigh without any significant immune response. Furthermore, no significant alterations were measured in serum parameters and the specific pathological features induced by most toxic compounds for liver and kidney toxicity. Therefore, these results suggest that SCT-CS showing good biocompatibility and non-toxicity can be successfully prepared from cellulose powder of SCT as well as has the potential for use as a powerful biomaterial for medical sutures.

• 공업화학
• /
• 제9권2호
• /
• pp.165-171
• /
• 1998

$Y_2O_3$(99.9%)와 $BaCO_3$(99.9%) 및 CuO(99.9%)를 사용하여 $Y_1Ba_2Cu_3O_{7-x}$(123) 분말을 발화합성법에 의해 제조하였다. 발화전 용액을 여러 가지 pH로 변화시켜 제조하였으며, 이 분말을 성형하여 열처리 온도와 시간 변화에 따른 상형성과 반응특성을 조사하였다. 시료의 조성과 조직의 특성은 ICP와 SEM을 이용하여 측정하였고, Y-Ba-Cu-O계의 상형성과 전화율을 결정하기 위해 X선 회절분석을 하였다. 발화합성법을 이용하여 pH 7(${\pm}0.3$)에서 제조된 123 분말이 순도와 균일성 및 반응특성에서 가장 좋은 결과를 보였다. pH 7(${\pm}0.3$)에서 제조된 분말을 이용한 123 상생성에 따른 활성화에너지(${\Delta}E_a$)는 191kJ/mol으로서 고상반응법의 230kJ/mol에 약 13% 정도 더 낮았다.

• 분석과학
• /
• 제24권4호
• /
• pp.275-281
• /
• 2011

세제 제조시설 폐수의 유기물을 틀로 하여 $Al(OH)_3$과 $H_3PO_4$의 반응으로 $AlPO_4$-계 물질을 합성하였다. 소성된 $AlPO_4$-계 물질을 APTMS, 석신산 무수물과 반응시켜 표면을 카르복실기로 바꾸었다. 분말 XRD 결과, 특징적인 $AlPO_4$-계 물질의 패턴을 얻었으며, 물질의 형태는 SEM으로 조사하였고, 작용기는 FT-IR 분석으로 확인하였다. 증류수에 분산시킨 고체의 표면 전위 측정 결과, $AlPO_4-NH_2$는 양의 표면 전하를 갖는 반면, $AlPO_4$-COOH는 음의 표면 전하를 갖는 것으로 나타났다. 합성된 $AlPO_4$-계 물질을 이용하여 수용액에서 유해 중금속의 제거 실험을 수행하였다. 납 이온은 표면에 존재하는 카르복실기와 착물을 형성하며 물질에 흡착되었고, 흡착 분배계수는 91.1 mL/g이었다. 결론적으로 본 연구에서 고찰한 $AlPO_4$-계 물질은 수환경에서 유해 중금속 이온의 제거에 활용될 수 있을 것이다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권5호
• /
• pp.775-783
• /
• 2007

To elucidate the efficacy of different soy protein sources on piglet's performance, a total of 280 weaned piglets ($Duroc{\times}Yorkshire{\times}Landrace$, $23{\pm}3$ d of age, $5.86{\pm}0.45$ kg initial BW) were allotted to 5 treatment diets comprising soybean meal (SBM), soy protein concentrate (SPC), Hamlet protein (HP300), fungal (Aspergillus oryzae) fermented soy protein (FSP-A), and fungal plus bacterial (A. oryzae+Bacillus subtilis) fermented soy protein (FSP-B), respectively. Experimental diets for feeding trial were formulated to contain each soy protein sources at 8% level to corn-whey powder basal diet. There were 14 pigs per pen and 4 pens per treatment. Experimental diets were fed from 0 to 14 d after weaning and then a common commercial diet was fed from 15 to 35 d. Also for ileal digestibility studies, 18 pigs were assigned to 6 dietary treatments as N-free, SBM, SPC, HP300, FSP-A and FSP-B with T-canulation at distal ileum for 6 days. At $14^{th}$ d of experimental feeding, the ADG was significantly higher (p<0.05) in SPC fed diet as compared with others. Similar trend was noticed during the 15-35 d and overall study (0-35 d). All the processed soy protein sources tested in this experiment improved (p<0.05) growth than SBM during overall study. The nutrient digestibility of GE, DM, CP and Ca showed lower (p<0.05) values in SBM and FSP-A fed groups than SPC and FSP-B treatments. The apparent ileal digestibility of TEAA, non-TEAA and TAA showed lower (p<0.05) in SBM treatments compared with other soy protein sources. The true ileal digestibility of TEAA, non-TEAA and TAA were lower (p<0.05) in SBM fed group than SPC and HP300 treatments, and lower than FSP treatments though they didn't achieve significant difference (p>0.05). Villous height and crypt depth was not affected by dietary treatments. In conclusion, the growth and digestibility of nutrients in weaned pigs fed SPC was superior to others. Also FSP-A and FSP-B showed improved performance than those fed SBM.

• 자원리싸이클링
• /
• 제19권5호
• /
• pp.58-67
• /
• 2010

[ $PdCl_2$ ] 함유된 폴리올공정을 이용하여 다양한 입도와 두께를 가진 판상 은 분말을 제조하였고 그 특성을 분석하였다. 판상 은 제조시 반응시간, $NH_4OH$, PVP 및 $PdCl_2$의 농도를 변화시킴으로서 각각의 조건 변화에 따른 영향을 조사하였다. 또한 제조된 판상 은 분말의 특성을 SEM, HR-TEM, XRD, PSA 및 Image analyzer를 통하여 분석하였다. 본 연구를 통하여 반응시간 120분의 조건에서 평균 크기 약 $5.5\;{\mu}m$ 및 $0.2\;{\mu}m$ 두께의 판상은 분말을 제조하였다. 반응조건 중$NH_4OH$ 및 $PdCl_2$의 농도가 증가함에 따라 분말의 크기가 증가하였다. 또한 PVP 농도가 증가함에 따라 판상 은 분말의 두께는 감소하였다.

• 한국세라믹학회지
• /
• 제39권5호
• /
• pp.473-478
• /
• 2002

Flux법과 마이크로파 가열법으로 $Al_2(SO_4)_3+2Na_2SO_4$ 및 ${\gamma}-Al_2O_3+2Na_2SO_4$ 분말혼합물로부터 ${\alpha}-Al_2O_3$ 판상체(platelets)를 합성하였다. ${\alpha}-Al_2O_3$ 판상체 형성에 미치는 마이크로파의 영향을 조사하기 위하여 DTA-TG, XRD 및 SEM을 이용하였다. $Al_2(SO_4)_3+2Na_2SO_4$ 혼합물의 경우, 마이크로파로 가열된 시료는 재래식으로 가열된 시료에 비하여 입자의 크기가 작고 응집체로 구성된 ${\alpha}-Al_2O_3$ 판상체로 나타났다. ${\gamma}-Al_2O_3+2Na_2SO_4$ 혼합물의 경우, 마이크로파 가열에 의한 ${\alpha}-Al_2O_3$ 판상체 형성온도는 재래식 가열에 의한 형성온도 보다 낮았다. 또한 마이크로파로 가열된 시료의 형상은 재래식으로 가열된 시료의 형상과 유사하였다. 그러나 마이크로파로 가열된 시료는 재래식으로 가열된 시료에 비하여 입자의 크기가 작았다.

• 치위생과학회지
• /
• 제11권5호
• /
• pp.405-410
• /
• 2011

본 연구의 목적은 표면 거칠기를 증가시키기 위하여 알루미나와 하이드록시아파타이트를 이용하여 각각 블라스팅 처리한 뒤 염화나트륨을 전해액 내에 섞어 양극산화 방법을 이용하여 염소가 함유된 표면을 만들고 항균력을 평가하는데 있다. 그리고 표면 특성과 항균력을 평가하여 다음과 같은 결과를 얻었다. 1. SEM 표면 관찰에서는 블라스팅 처리 후 양극산화한 결과 실험군 2와 3에서 연마처리한 실험군 1에 비해 거친 요철구조를 관찰할 수 있었다. 2. EDS 조성분석 결과 실험군 2에서는 칼슘, 인, 염소 성분과 더불어 알루미늄이 관찰된 반면, 실험군 3에서는 칼슘, 인과 염소 성분만을 관찰할 수 있었다. 3. 표면 거칠기 분석 결과 평균 표면 거칠기의 값이 실험군 2, 실험군 3, 실험군 1순으로 작았으며, 실험군 2와 3 간에는 유의한 차이가 없었다(p>0.05). 4. 항균력 평가 결과 실험군 2가 가장 적은 세균수를 보여 우수한 항균력을 보였으나 이는 실험군 3과 유의한 차이가 없었다(p>0.05). 알루미나와 하이드록시아파타이트를 이용하여 각각 블라스팅 처리한 뒤 염화나트륨을 전해액 내에 섞어 양극산화 방법을 이용하여 염소가 함유된 표면을 만들 수 있었으며, 그 결과 연마처리한 시편에 비해 높은 표면 거칠기와 우수한 항균력을 보였다. 그러나 그 재료의 효과와 안정성을 입증하기 위해서는 추가적인 in vitro와 in vivo 실험이 수행되어야겠다.

• Journal of Periodontal and Implant Science
• /
• 제32권3호
• /
• pp.665-683
• /
• 2002

A novel glucanhydrolase from a mutant of Lipomyces starkeyi KSM 22 has additional amylase activity besides mutanolytic activity and has been suggested as promising anti-plaque agent. It has been shown effective in hydrolysis of mutan, reduction of mutan formation by Streptococcus mutans and removal pre-formed sucrose-dependent adherent microbial film and has been strongly bound to hydroxyapatitie. These in vitro properties of Lipomyces starkeyi KSM 22 glucanhydrolase are desirable for its application as a dental plaque control agent. In human experimental gingivitis　model and 6 month clinical trial, mouthrinsing with Lipomyces　starkeyi KSM 22 dextranase was comparable to 0.12% chlorhexidine mouthwash in inhibition of plaque accumulation and gingival inflammation and local side effect was negligible. This study was aimed to evaluate the cytotoxic effect of Lipomyces starkeyi KSM 22 glucanhydrolase on human gingival fibroblasts. Primary culture of human gingival fibroblasts at the 4th to 6th passages were used. Glucanhydrolase solution was made from lyophilized glucanhydrolase powder from a mutant of Lipomyces stakeyi KSM 22 solved in PBS and added to DMEM medium to the final concentration of 0.5, 1, and 2 unit. Cells were exposed to glucanhydrolase solution or 0.1 % chlorhexidine and the cells cultured in DMEM with 10% FBS and 1% antibiotics as control. After exposure, the morphological change, cell attachment, and cell activity by MTT assay were evaluated in 0.5, 1.5, 3, 6, 24 hours after treatment. The cell proliferation and cell activity was also evaluated at 2 and 7 days after 1 minute exposure, twice a day. The cell morphology was similar between the Lipomyces smkeyi KSM 22 glucanhydrolase groups and control group during the incubation periods, while most fibroblasts remained as round cell regardless of incubation time in the chlorhexidine group. The numbers of the attached cells in the glucanhydrolase groups were comparable to that of control and significantly higher than the chlorhexidine group. The numbers of the proliferated cells in the glucanhydrolase groups at 7 days of incubation were comparable to the control group and higher than the chlorhexidine group. The cell activity in glucanhydrolase groups paralleled with the increased cell number by attachment and proliferation. According to these results, Lipomyces starkeyj KSM 22 glucanhydrolase has little harmful effect on attachment and proliferation of human gingival fibroblasts, in contrast to 0.1% chlorhexidine which was cytotoxic to human gingival fibroblasts. Therefore this glucanhydrolase preparation is considered as a safe and promising agent for new mouthwash formula in the near future.

• 한국산업보건학회지
• /
• 제30권2호
• /
• pp.153-162
• /
• 2020

Objectives: 3D printing technologies have become widely developed and are increasingly being used for a variety of purposes. Recently, the evaluation of 3D printing operations has been conducted through chamber test studies, and actual workplace studies have yet to be completed. Therefore, the objective of this study was to determine the emission of volatile organic compounds(VOCs), metals, and particles from printing operations at a workplace. This included monitoring conducted at a commercial 3D printing service workplace where the processes involved material extrusion, material jetting, binder jetting, vat photo polymerization, and powder bed fusion. Methods: Area samples were collected with using a Tenax TA tube for VOC emission and MCE filter for metals in the workplace. For particle monitoring, Mini Particle Samplers(MPS) were also placed in the printer, indoor work area, and outdoor area. The objective was to analyze and identify particles' size, morphology, and chemical composition using transmission electron microscopy with energy dispersive spectroscopy(TEM-EDS) in the workplace. Results: The monitoring revealed that the concentration of VOCs and metals generated during the 3D printing process was low. However, it also revealed that within the 3D printing area, the highest concentration of total volatile organic compounds(TVOC) was 4,164 ppb at the vat photopolymerization 3D printing workplace, and the lowest was 148 ppb at the material extrusion 3D printing workplace. For the metals monitoring, chromium, which, is carcinogenic for humans, was detected in the workplace. As a characteristic of the particles, nano-sized particles were also found during the monitoring, but most of them were agglomerated with large and small particles. Conclusions: Based on the monitoring conducted at the commercial 3D printing operation, the results revealed that the concentration of VOCs and metals in the workplace were within Korea's occupational exposure limits. However, due to the emission of nano-sized particles during 3D printing operations, it was recommended that the exposure to VOCs and metals in the workplace should be minimized out of concern for workers' health. It was also shown that the characteristics of particles emitted from 3D printing operations may spread widely within an indoor workplace.

• 한국광물학회지
• /
• 제19권3호
• /
• pp.129-138
• /
• 2006

경남 고성군 삼산제일광산과 삼봉광산의 폐석 적치장 하류 하천에서 발견된 2차 침전물을 주사 전자현미경 관찰, 전자현미분석 및 X선회절분석을 실시하여 그 실체를 규명하였다. 이 두 광산은 모두 구리 황화염 광물을 주 대상으로 채광하던 곳인데, 현재는 모두 폐광 중이다. 삼봉광산의 경우 흰색 침전물과 청색 침전물, 삼산제일광산의 경우 녹색 침전물이 발견된다. 흰색 침전물은 장축 $10{\mu}m$, 단축 $3{\mu}m$ 정도의 규조류가 약 $30{\mu}m$ 두께로 기존 암석을 피복하고 있는 것인데, 이 규조류는 담수에 서식하는 우상류의 일종인 Fragilaria construens이다. 청색 침전물은 황동석이 용탈되어 변질된 것인데, 변질 결과 Cu:Fe 비가 약 5에서 13으로 증가한다. 녹색 침전물은 $200{\sim}300nm$, 지름은 $200{\sim}300nm$ 정도의 벌레 모양을 가지고 있는 물질이 피복하고 있는데, 이들은 2차적으로 형성된 woodwardite같은 구리의 황산염이 주를 이루고 있는 것으로 여겨진다. 구리의 함량이 현재까지 보고된 구리 황산염 광물에 비하여 월등히 높은 점으로 볼 때 미생물의 활동과 관련이 있다고 생각된다. 이 물질의 정확한 동정을 위해서는 추가적인 연구가 더 필요하다.