• 한국분말재료학회지
• /
• 제3권4호
• /
• pp.227-232
• /
• 1996

(i) The development of a metallurgical bond during the spray forming of clad products has offered the possibility of manufacturing large rolls, including those used in hot and cold strip mills. Small rolls are already being produced in Japan. (ii) Technical developments, including the use-of-multi-atomizers have resulted in the elimination of porosity from the internal bore of a sprayed tube. Bimetallic tubing can also be manufactured and the installation of a 4.5 ton tube plant in the USA should provide low operation costs. (iii) Spray forming offers a potentially low cost manufacturing route for superalloy ring/casing components in high strength superalloys. (iv) A large pilot plant has been built for the spray forming of ultra-clean superalloys for turbine disc applications. (v) Using twin-atomizing technology, special steel billets have been spray formed up to 400mm diameter with deposition yields in excess of 90%. (vi) Al/Si alloy extrusion billets with excellent dimensional tolerances are being manufactured for large scale automotive applications. Several new aluminum alloys have also been developed, including high strength, low density and low cocfficient of expansion materials. (vii) New copper alloys have been developed and pilot plants are in operation to produce these alloys once markets have become established.

• Nutrition Research and Practice
• /
• 제13권6호
• /
• pp.529-534
• /
• 2019

BACKGROUND/OBJECTIVES: The leaves of Moringa oleifera (MO) and Moringa stenopetala (MS) commonly grown in Ethiopia possess potential nutritional and medicinal value. The aim of this study was to evaluate the nutritional and functional characteristics of the dried leaf powder from two Moringa species to develop sustainable nutritional supplements for Ethiopians from locally grown plant sources. MATERIALS/METHODS: Freshly harvested and air-dried MO and MS leaves were authenticated and the nutritional contents, such as protein, ash, lipids, and selected vitamins and minerals, were analyzed using standard analytical procedures. Amino acid compositions were also determined by an amino acid analyzer. Nine-week-old mice were randomly divided into four groups to investigate the anti-obesity effects of Moringa. The first group was fed a basal diet, the second group a high-fat diet, and the others were fed a high-fat diet containing 0.1% Moringa leaf powder from each species. After seven weeks, serum indices related to lipid profiles from each mouse were analyzed. RESULTS: The present study revealed high protein (28-29%) and ash (7-11%) contents. Glutamic acid, aspartic acid, proline, and leucine were the most abundantly found amino acids in both species. The predominant minerals in the leaf powder were calcium (826-1,530 mg/100 g), potassium (794-904 mg/100 g), and magnesium (286-431 mg/100 g). Pyridoxine (475.06 mg/100 g) and vitamin E (34.2 mg/100 g) were found only in MS. Niacin was found only in MO at 32.21 mg/100 g, whereas ascorbic acid was found in both species (3.89 and 6.19 mg/100 g dry weight for MO and MS, respectively). The results of the animal study showed that mice on a high-fat diet containing 0.1% MO leaf powder alleviated the elevation of cholesterol, triglycerides, and low-density lipoprotein cholesterol induced by the high fat diet. MO was more effective than MS in preventing hypercholesterolemia and fat deposition. CONCLUSION: The findings in this work confirmed that Moringa leaves of both MO and MS possessed high nutritional value but MO was better at preventing the harmful effects of the high-fat diet than MS.

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권3호
• /
• pp.9-12
• /
• 2005

[ $Y_1Ba_2Cu_3O_{7-8}$ ] (YBCO) coated conductor has been fabricated by batch-type process using oxide-precursor-based metal-organic deposition (MOD) method. The batch-type process can be scaled up more simply to Produce long-length YBCO conductor than the reel-to-reel process. Also, it has less handling problems and is adequate to the ambient gas environment. In this work, YBCO oride powder was used as a starting precursor for MOD method. After reel-to-reel dip coating process, me ter-long-buffered metal tape was wound around a cylinder and underwent calcination and annealing processes. Annealed YBCO films showed good c-axis alignment and dense surface morphology with no cracks, but exhibited very low critical current density of $10^5\;A/cm^2$.

• 공업화학
• /
• 제9권6호
• /
• pp.798-802
• /
• 1998

탄소제립물은 야자각 분말을 coal tar 용액과 혼합시켜 성형한 후, 이를 여러 가지 온도에서 탄화시켜 제조하였다. 탄소제립물의 미세공 조절을 위하여 질소분위기에서 벤젠 증착시간을 변화시켰다. 여러 가지 시료에 대해서 SEM을 이용하여 얻은 Morphology와 진밀도를 비교하였고 Cahn D-200장치를 이용한 산소 및 질소의 흡착속도를 측정하여 가스의 확산계수, 분리계수 및 흡착평형량을 얻었다. 흡착특성 결과의 분석을 통해 분자체 제조에 적합한 탄화온도와 변형시간은 각각 $800^{\circ}C$와 10분이며, 이때 산소와 질소의 분리계수는 26.4임을 알 수 있었다.

• 한국세라믹학회지
• /
• 제45권7호
• /
• pp.411-417
• /
• 2008

Aerosol Deposition Method (ADM) is a novel technique to grow ceramic thick films with high density and nano-crystal structure at room temperature. $^{1,2)}$ For these unique advantages of ADM, it would be applied to the fabrication process of 3-D integration ceramic modules effectively. However, it is critical to control the properties of starting powders, because a film formation through ADM is achieved by impaction and consolidation of starting powders on the substrates. We fabricated alumina thick films by ADM for the application to integral substrates for RF modules. When the as-received alumina powders were used as a starting material without any treatments, it was observed that the dielectric properties of as-deposited alumina films, such as relative permittivity and loss tangent, showed high dependency on the frequency. In this study, some techniques of powder pre-treatments to improve the dielectric properties of alumina thick films will be shown and the effects of starting powders on the properties of AD films will be discussed.

• 한국표면공학회지
• /
• 제47권5호
• /
• pp.215-220
• /
• 2014

Electrodeposition behaviors of Pd-Ni alloys were investigated from the polarization curves in a solution containing ethylenediamine as complexing agent. The microstructure and hardness of electrodeposited Pd-Ni alloys were also characterized. Codeposition of Pd-Ni alloys was successfully performed in the wide current density ranging from 2 to $5000A{\cdot}m^{-2}$ because the deposition potential of Pd became close to that of Ni in the ethylenediamine-contained solution. It was also found from X-ray diffraction patterns that the solid solution between Pd and Ni was formed with variation of the composition of alloys. The measured hardness of Pd-Ni alloys increased with increasing the contents of Ni due to solid solution strengthening and grain refinement. The electrodeposited Pd-Ni alloys also exhibited a crack free smooth surface morphology from the SEM observation.

• 방사선산업학회지
• /
• 제9권4호
• /
• pp.167-170
• /
• 2015

Radioisotope (Nuclear) battery using $^{63}Ni$ was prepared as beta cell. The electroplated $^{63}Ni$ on Ni foil is fabricated, and beta cell and photovoltaic hybrid battery was designed to use at both day and night in space project. A Ni-plating solution is prepared by dissolving metal particles including $^{62}Ni$ and $^{63}Ni$ from neutron irradiation of ($n,{\gamma}$). Electroplating solution of a chloride bath consists on nickel ions in HCl, $H_3BO_3$, and KOH. The deposition was carried out at current density of $10mA\;cm^{-2}$. The prepared beta source was attached on a PN junction and measured I-V properties. The power output at activity of 0.07 mCi and 0.45 mCi were 0.55 pW and 2.69 nW, respectively.

• 한국재료학회지
• /
• 제31권10호
• /
• pp.546-551
• /
• 2021

To improve ferroelectric properties of PZT, many studies have attempted to fabricate dense PZT films. The AD process has an advantage for forming dense ceramic films at room temperature without any additional heat treatment in low vacuum. Thick films coated by AD have a higher dielectric breakdown strength due to their higher density than those coated using conventional methods. To improve the breakdown strength, glass (SiO₂-Al₂O₃-Y₂O₃, SAY) is mixed with PZT powder at various volume ratios (PZT-xSAY, x = 0, 5, 10 vol%) and coating films are produced on silicon wafers by AD method. Depending on the ratio of PZT to glass, dielectric breakdown strength and energy storage efficiency characteristics change. Mechanical impact in the AD process makes the SAY glass more viscous and fills the film densely. Compared to pure PZT film, PZT-SAY film shows an 87.5 % increase in breakdown strength and a 35.3 % increase in energy storage efficiency.

• Mycobiology
• /
• 제46권2호
• /
• pp.159-167
• /
• 2018

This study evaluated the in vitro and in vivo hypolipidemic effects of the medicinal mushroom Phellinus pini. The methanol extract (ME) of the fruiting body of Ph. pini was active against pancreatic lipase and cholesterol esterase with 99.14% and 67.23% inhibited activity at 1.0 mg/mL, respectively. It also inhibited 81.81% and 55.33% of ${\alpha}$-glucosidase and ${\alpha}$-amylase activities, respectively, at 2.0 mg/mL. Hyperlipidemia as induced by feeding rats with a high fat and cholesterol diet (HFC). HFC supplemented with a 5% fruiting body powder of Ph. pini (HFC + PhP) significantly reduced plasma total cholesterol, low-density lipoprotein cholesterol, and triglycerides in rats compared with HFC. The reduced levels were comparable to rats fed the normal control diet (NC). The atherogenic index of HFC + PhP rats was significantly lower than that of the HFC rats. The excretion of fecal total lipid and cholesterol in the HFC + PhP rats was significantly higher than those in the NC and HFC rats. Histopathological examinations demonstrated scant deposition of lipids in the liver of rats fed HFC + PhP. The dietary supplementation with the fruiting body powder provided natural plasma lipid and glucose lowering effects in experimental rats without adverse effects on the plasma biochemical parameters and liver function related enzyme activities. Therefore, the hypolipidemic effects of Ph. pini may be due to the inhibitory effects on pancreatic lipase, cholesterol esterase, ${\alpha}$-glucosidase, and ${\alpha}$-amylase, and excretion of excess lipids and cholesterol in the feces.

• 한국분말재료학회지
• /
• 제25권1호
• /
• pp.1-6
• /
• 2018

Uniform $TiO_2$ blocking layers (BLs) are fabricated using ultrasonic spray pyrolysis deposition (USPD) method. To improve the photovoltaic performance of dye-sensitized solar cells (DSSCs), the BL thickness is controlled by using USPD times of 0, 20, 60, and 100 min, creating $TiO_2$ BLs of 0, 40, 70, and 100 nm, respectively, in average thickness on fluorine-doped tin oxide (FTO) glass. Compared to the other samples, the DSSC containing the uniform $TiO_2$ BL of 70 nm in thickness shows a superior power conversion efficiency of $7.58{\pm}0.20%$ because of the suppression of electron recombination by the effect of the optimized thickness. The performance improvement is mainly attributed to the increased open-circuit voltage ($0.77{\pm}0.02V$) achieved by the increased Fermi energy levels of the working electrodes and the improved short-circuit current density ($15.67{\pm}0.43mA/cm^2$) by efficient electron transfer pathways. Therefore, optimized $TiO_2$ BLs fabricated by USPD may allow performance improvements in DSSCs.