• Korean Journal of Materials Research
• /
• v.12 no.3
• /
• pp.205-210
• /
• 2002

The HPS(High Porosity Support, 39.3%) and the LPS( Low Porosity Support, 18.7%) were fabricated to investigate the phase transformation and the chance of microstructure with porosity of alumina support. Alumina sol was made using aluminum tri-sec $butoxide(ATSB,\; Al(O-Bu)_3)$, the membrane on porous support with different porosity and the membrane without support were fabricated. The $\theta$-to ${\alpha}-A1_2O_3$ phase transformation in the membranes was investigated using thin film X-ray diffraction (XRD), and the change of microstructure was observed using scanning electron microscopy(SEM). XRD patterns showed that the membrane on LPS and HPS had 10$0^{\circ}C$, 5$0^{\circ}C$ higher $\theta$-to ${\alpha}-A1_2O_3$ transformation temperature compared to the unsupported membrane. A similar effect was also observed in microstructure of the membranes, theoritical temperature difference were 97$^{\circ}C$ and 44$^{\circ}C$ by Crapeyron equation.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.90.2-90
• /
• 2003

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.2
• /
• pp.87-91
• /
• 2011

The purpose of this study is to develop ceramic glazes for the pottery production by utilizing wasted white porcelain, celadon porcelain and bone china thrown away from the areas of Icheon and Yeoju. Most of Korean pottery manufacturers are located in the both areas. According to the XRF analysis, the wasted white porcelain contains over 67 % of silica. It is enough to make a transparent glaze without adding silica. The wasted celadon porcelain contains much $Fe_2O_3$, which is suitable for producing a celadon glaze. The wasted bone china contains 22 % of $P_2O_5$, which is suitable for making a milky white bone china glaze. As a result, it is expected that production of pottery glaze using the wasted porcelains will reduce pollution problems comes from the landfill, and obtain economic effects in terms of resources recycling. It is also expected to be utilized as alternative materials of imported ones.

• Analytical Science and Technology
• /
• v.29 no.6
• /
• pp.269-276
• /
• 2016

Gosan-ri site is known as the early Neolithic cultural heritage, in which an archaic plainware, called as the Gosan-ri-type pottery, was excavated regarding as the first pottery manufactured in Korea. In this study, OSL dating was carried out to five soil layer samples collected in stratigraphic cross-section for evaluating the formation and occupation of the Gosan-ri site. Paleodose of each soil sample was calculated using the single aliquot regenerative dose (SAR) method with preheat of $220^{\circ}C$ and finally determined using maximum age model, considering its deposition process. The OSL age was determined from the ratio of paleodose to annual dose rate. From the resultant OSL ages and the related 14C dates, it was concluded that the Gosan-ri site was formed after 9,000 BC and a variety of cultural feature including the Gosan-ri-type pottery were occupied ranging from the early Neolithic to the middle of 4,000 BC. Finally, the Gosan-ri site was discarded in the middle of 4,000 BC and has been arrived at present through natural deposits.

• Journal of Conservation Science
• /
• v.33 no.2
• /
• pp.131-147
• /
• 2017

The purpose of this study is to analyze the characteristics of Punchong and Whiteware pottery excavated from the kiln site in Dongkok-Town, Gimge. Scientific analysis is carried out to evaluate the physical and chemical properties of the body and glaze. The physical properties indicate the gradual development of the production technology with respect to the kiln operating conditions and period. In chemical properties, the ceramic body is found to be made of raw materials from the same source, but the mixing method depends on the type of Punchong and Whiteware pottery, the production kiln, and period. Whiteware pottery is manufactured with less over 1.3% of the colorant content and more about 1.2% of the $K_2O$ flux content than Punchong pottery. This compositions allow easier vitrification at the same temperature. These characteristics which is low colorant content and high flux content become more prominent as lately. The ceramic glaze is likely to have changed the type of raw materials used after 16~17C, as the contents of MgO, $TiO_2$, MnO, $P_2O_5$ are less three to ten times than 15C.

• Analytical Science and Technology
• /
• v.25 no.5
• /
• pp.324-332
• /
• 2012

Construction era of Pungnabtoseong earthen wall is one of the most popular controversial issues in Korean archaeological research. For the evaluation of construction era, OSL dating was carried out using seven pottery pieces collected in each construction stage. From TL/OSL characteristics, and the results of absolute zeroing test and recovery test, it was proved that the pottery samples were completely bleached. The reliable paleodose was evaluated by using the SAR method with preheat at $220^{\circ}C$, and the pottery OSL age was determined from the ratio of paleodose to annual dose rate. Considering the resultant OSL ages, archaeological context and the related 14C ages, the first construction era was determined as $294{\pm}52$ yrs AD ($1{\sigma}$ SE). Also we found that the enlargement of construction stage III was $328{\pm}30$ yrs AD ($1{\sigma}$ SE) and final construction was finished within $400{\pm}76$ yrs AD ($1{\sigma}$ SE). Therefore, it is suggested that the construction of Pungnabtoseong earthen wall was firstly started in the late $3^{rd}$ century AD and several enlargements and repairs had been carried out, before the transfer of the capital of Baekje dynasty to Woongjin (Gongju) at 475 AD.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.3
• /
• pp.158-171
• /
• 2023

Pottery filled with organic materials was excavated from the G-2 building site of Yongjangseong Fortress, Jingo, a relic of the Goryeo Dynasty. In this study, the characteristics of organic material were confirmed by a scientific analysis of organic material in pottery found at the palace in Yongjangseong, Jindo. In addition, it was intended to review the analysis method to identify the natural resin and to secure characteristic components(biomarkers) for each natural resin and use them as basic data in the future. The organic materials in the pottery were analyzed using attenuated total reflectance Fourier-transformed infrared spectroscopy(ATR-FTIR) and gas chromatography mass spectrometry(GC-MS). The infrared spectral characteristics were estimated to be natural resin, and biomarkers of organic materials were identified as sesquiterpene-based compounds(C₁₅H₂₄, MW 204) and derivatives. The lacquer(T.vemicifluum) is composed mainly of alkenes, alkanes, and catechol. Pine resin(P.densiflora), on the other hand, is primarily composed of diterpenoid(abietic acid, pimaric acid) and Whangchil(yellow lacquer) is identified to have sesquiterpenes(such as selinene, muurolene, calamenene) as its main components. So, the organic material in the pottery can be identified as Whangchil by comparing their compounds with modern resin materials from Dendropanax. morbifera that correspond with the results. Whangchil, which is exuded from the Dendropanax. morbifera, has been used as a natural coating materials since ancient times, and it has been confirmed that the characteristic components are well preserved even 700 years later. It can be assumed that the interior Whangchil was stored not for use as a coating, but rather for ritual purposes when the building was constructed, because the pottery was found near the cornerstone. Furthermore, based on simplified sample preparation using pyrolysis-gas chromatography mass spectrometry(Py-GC-MS), the thermal decomposition products were found to be similar to the characteristic components, suggesting that this method can be applied to the identification of natural resins used in historic artifacts.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1770-1773
• /
• 1991

In this paper we present one modeling system, which is composed of a 3-dimensional proile measurement unit, a CAD system and a NC milling machine. This system is compactly combined so that measurement, designing and manufacturing can be performed efficiently. This system was actually applied to make a plaster model of the pottery.

• KOMUNHWA
• /
• no.36
• /
• pp.23-46
• /
• 1990

We have examined 10 samples of neolithic pinched potteries from Tongsam-dong site to find out the composition of paste and the firing temperature through scientific methods. We made thin sections of shards and observed them under a polarizing microscope.

• Journal of Convergence for Information Technology
• /
• v.9 no.4
• /
• pp.8-13
• /
• 2019

In this paper, based on the production technology and infrastructure of local cultural contents, it is determined that reconstruction and commercialization of local culture resources are necessary due to absence of character brand products centered on storytelling. It is expected to contribute to the expansion of the supply of advanced ceramic products along with the foundation of various contents production as it becomes the foundation to establish the developed business base through the differentiation strategy of the character product development based on the storytelling. In addition, due to the manual production, only a small amount of production can be produced and the production period is lengthened. On the other hand, the production period of gypsum mold is shortened by making mock-up through 3D program and 3D printing, It was effective in developing a wide variety of pottery products.