• Analytical Science and Technology
• /
• v.23 no.2
• /
• pp.155-160
• /
• 2010

This study was performed to compare international analytical methods of bromate and applied to determine bromate in bottled mineral water in Korea. Bromate in bottled mineral water was eluted by 10~50 mM potassium hydroxide (KOH) and determined by ion chromatograph-suppressed conductivity detector (ICCD). Sample was purified with on guard Ba-, Ag- and H-cartridges and $0.2\;{\mu}m$ membrane filter. The method detection limit (MDL) and the limit of quantitation (LOQ) of bromate were 0.1 and $0.5\;{\mu}g/L$, respectively. The calibration curve showed good lineality above 0.9998 in the ranges of the $0.5\sim40\;{\mu}g/L$. Bromate from 33 samples among total 157 bottled mineral water samples was detected in the concentration range of $0.5\sim6.5\;{\mu}g/L$. The detected concentrations were within bottled mineral water quality criteria ($10\;{\mu}g/L$) in Korea.

• Polymer(Korea)
• /
• v.35 no.1
• /
• pp.35-39
• /
• 2011

In this work, mesoporous carbons (CMK-3) were prepared by a conventional templating method using mesoporous silica (SBA-15) for using catalyst supports in polymer electrolyte membrane fuel cells (PEMFCs). The CMK-3 were chemically activated to obtain high surface area and small pore diameter with different potassium hydroxide (KOH) amounts, i.e., 0, 1, 3, and 4 g as an activating agent. And then Pt-Ru was deposited onto activated CMK-3 (K-CMK-3) by a chemical reduction method. The characteristics of Pt-Ru catalysts deposited onto K-CMK-3 were determined by surface area and pore size analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and inductive coupled plasma-mass spectrometry (ICP-MS). The electrochemical properties of Pt-Ru/K-CMK-3 catalysts were also analyzed by cyclic voltammetry (CV). From the results, the K3g-CMK-3 carbon supports activated with 3 g KOH showed the highest specific surface areas. In addition, the K3g-CMK-3 led to uniform dispersion of Pt-Ru onto K-CMK-3, resulted in the enhancement of elelctro-catalystic activity of Pt-Ru catalysts.

• Journal of the Korean Chemical Society
• /
• v.37 no.8
• /
• pp.711-716
• /
• 1993

The mechanism for electrochemical oxidation of natural alkaloid, ${\iota}$-sparteine (SP) was studied in acetonitrile solvent. The cyclic voltammogram of SP shows two irreversible anodic peaks at +0.75 V and +1.45 V vs. Ag/AgCl (0.1M AgNO$_2$ in acetonitrile) electrode. Coulometry reveals that the number of electrons involved in each oxidation peaks is in the range of 1.2∼1.3 respectively. Neutral imine radical was produced by fast deprotonation of SP radical cation formed by oxidation of one nitrogen atom in SP. Two pathways are possible for the reaction of the neutral radical: Due to the disproportionation of the radical, SP and enamine were mainly produced. Also, the 1,2-dehydrosparteinium cation was formed as minor product through the second one electron transfer oxidation of this radical. The (+)-lupanine was produced by treatment of sparteinium cation with potassium hydroxide. We have isolated and confirmed the electrolysis products using IR, GC-MS, UV-Vis, and thin-layer spectroelectrochemical method.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.1
• /
• pp.55-62
• /
• 2012

The present paper investigates the performance of the KOH aqueous solution as an absorbent to capture carbon dioxide ($CO_2$). The chemical absorption was carried out according to consecutive reactions that are generated in the order of $K_2CO_3$ and $KHCO_3$. The overall absorption was completed with following the physical absorption. When the absorption was conducted with the KOH as the limiting reactants in batch a reactor, $K_2CO_3$ production rate was the 1st order reaction for $OH^-$. However, $KHCO_3$ generation reaction was independent of the $CO_3^{2-}$ concentration and the rate was calculated to be $0.18gCO_2/min$ for all KOH absorbents, which is the same value of the reaction rate using $K_2CO_3$ aqueous solution as the absorbents. The overall $CO_2$ capture ratio of the 5% KOH absorbent was estimated to be 19% and the individual value in section 1 and 2 was 57 and 12%, respectively. The amount of $CO_2$ absorbed in the solution was very slightly less than the theoretical value, which was ascribed to the side reaction that produces $K_2CO_3{\cdot}KHCO_3{\cdot}1.5H_2O$ during the reaction and the consequent diminish in $CO_2$ absorption in the KOH solution.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.3
• /
• pp.186-191
• /
• 2015

BACKGROUND: Carotenoids which are a major source of vitamin A are contributed to have great potential role in anti-carcinogenic effects and eyesight. Carotenoids which can not synthesize in human body are required for food supply. The objectives of this study are to investigate compositions and contents of pumpkin (Cucurbita spp.) germplasms based on their pulp color. METHODS AND RESULTS: Carotenoids were extracted with 0.2% ascorbic acid in ethanol and saponified with 80% potassium hydroxide. Insoluble compounds were extracted into hexane. A total of nine carotenoids (three xanthophylls and six carotenes) were identified from pumpkin germplasms using HPLC equipped with photodiode array detector (450 nm). Especially, lutein and ${\beta}$-carotenes were major compound in germplasms. Among isomers of ${\beta}$-carotene, all-trans-${\beta}$-carotene (16-27% of total carotenoids) was predominant compositions. The mean of total carotenoid contents was showed as brown (286.1 mg/100 g dw) > dark green (217.0) > orange (153.4) > primrose (85.8) > dark yellow (80.3). On the basis of carotenoid information, PLS-DA score plots showed different patterns by cluster in pumpkin germplasms. It was considered that these differences of phenotype were relative closely to genotype. CONCLUSION: This study indicated that dark color of pumpkin pulp was presented in high-level of biological pigments. It may contribute to develop potentially beneficial functional food ingredients.

• Analytical Science and Technology
• /
• v.24 no.1
• /
• pp.10-14
• /
• 2011

This study was performed to compare international analytical methods of bromide and applied to determine bromide in bottled mineral water and raw ground water in Korea. Bromide in water was eluted by 10~50 mM potassium hydroxide (KOH) and determined by ion chromatography-suppressed conductivity detector (IC-CD). Sample was purified with Ba- and H-on-guard cartridge and $0.2\;{\mu}m$ membrane filter. The method detection limit (MDL) and the limit of quantitation (LOQ) of bromide were 0.2 and $0.5\;{\mu}g/L$, respectively. The calibration curve showed good lineality above 0.9993 in the ranges of the $0.5\sim80\;{\mu}g/L$. A correlation coefficient of bromide in ground water and sum of bromide and bromate in bottled mineral water is 0.808.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.938-943
• /
• 2018

Thin nano-sized fibres were prepared by an electrospinning method. The spinning appratus consisted of pump for polymer injection, nozzle and nozzle rotus, and an aluminum plate collected the polymer fibers. Its surface was chemically modified for selective improved adsorption of carbon monoxide at indoor level. The chemical activation enabled to form the fibres 250-350 nm in thickness with pore sizes distributed between 0.6 and 0.7 nm and an average specific surface area of $569m^2/g$. The adsorption capacities of pure (100%) and indoor (0.3%) $CO_2$, of which level frequently appears, at the ambient condition were improved from 1.08 and 0.013 to 2.2 and 0.144 mmol/g, respectively. It was found that the adsorption amount of $CO_2$ adsorbed by the chemically activated carbon nanofiber prepared through chemical activation would vary depending on the ratio of specific surface area and micropores. In particular, chemical interaction between adsorbent surface and gas molecules could enhance the selective capture of weak acidic $CO_2$.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.4
• /
• pp.299-314
• /
• 2021

In this study, we investigated the effect of temperature on specific surface area and electrochemical properties when lignin-based porous carbon (LBPC) with potassium hydroxide (KOH) is activated. After preparing LBPCs using lignin-polyacrylonitrile (PAN) copolymer, which was synthesized by graft polymerizing lignin and acrylonitrile as a precursor, activated LBPCs (KA-LBPC-6, 7, 8, 9) were manufactured by activating LBPC with KOH at 600℃, 700℃, 800℃ and 900℃. To identify the surface characteristics of KA-LBPC, observations were made with a scanning electron microscopy (SEM), and the pore characteristics were identified via specific surface area analysis. The electrochemical properties were analyzed using a three-electrode system. The experiment has shown that micropores formed by activation can be observed in SEM images. KA-LBPC-7 had the best pore characteristics among KA-LBPCs, with a specific surface area of 2480.1 m²/g, a micropore volume of 0.64 cm³/g, and a mesopore volume of 0.76 cm³/g. KA-LBPC-7 showed the best electrochemical properties with a specific capacitance of 151.3 F/g at the scan rate of 2 mV/s.

• Applied Chemistry for Engineering
• /
• v.33 no.6
• /
• pp.636-645
• /
• 2022

In this study, we investigated the adsorption characteristics of methyl orange (MO), an anionic dye, on ginkgo shell-based activated carbon (AC). For this purpose, ACs (GS-1, GS-2, and GS-4) with different textural properties were prepared using ginkgo shells and potassium hydroxide (KOH), a representative chemical activating agent. The correlation between the textural characteristics of AC prepared and the mixing ratio of KOH was investigated using nitrogen adsorption/desorption isotherms. The MO adsorption equilibrium experiment on the prepared ACs was conducted under different pH (pH 3~11) and temperature (298~318 K) conditions, and the results were investigated by Langmuir, Freundlich, Sips and temperature-dependent Sips equations. The feasibility of the MO adsorption treatment process of the prepared AC was also investigated using the dimensionless Langmuir separation factor. The heterogeneous adsorption properties of MO for the prepared AC examined using the adsorption energy distribution function (AED) were closely related to the system temperature and textural characteristics of AC. The kinetic results of the batch adsorption performed at different temperatures can be satisfactorily explained by the homogeneous surface diffusion model (HSDM), which takes into account the external mass transfer, intraparticle diffusion, and active site adsorption. The relationship between the activation energy value obtained by the Arrhenius plot and the adsorption energy distribution function value was also investigated. In addition, the adsorption process mechanism of MO on the prepared AC was evaluated using Biot number.

• Korean Journal of Veterinary Service
• /
• v.45 no.2
• /
• pp.117-124
• /
• 2022

In the event of an outbreak of a livestock epidemic, it has been considered that the existing burial-centered carcass disposal method should be improved ecofriendly for prevention of leachate and odors from burial basically in regard of pathogen inactivation. Therefore, the aim of this study is whether it was possible to treat the carcass of cattle and chickens using the chemical carcass treatment method. It was conducted to establish detailed treatment standards for the chemical treatment method of cattle and chicken carcasses based on the results of the proof of the absence of infectious diseases in cattle chickens. After inoculating cattle carcass with 10 pathogens (foot and mouth disease virus, bovine viral diarrhea virus, Mycobacterium bovis, Mycobacterium avium subsp. Paratuberculosis, Brucella abortus, Bacillus anthracis, Clostridium chauvoei, Clostridium perfringens, Escherichia coli, and Salmonella Typhimurium) and chicken carcasses with low pathogenic avian influenza virus, Clostridium perfringens type C, E. coli and Salmonella Typhimurium, these were treated at 90℃ for 5 hours in a potassium hydroxide liquid solution corresponding to 15% of the body weight. This method liquefies all cadaveric components and inactivates all inoculated pathogens by PCR and culture. Based on these results, it was possible to prove that chemical treatment of cattle and chicken carcasses is effective in killing pathogens and is a safe method without the risk of disease transmission. The chemical treatment method of livestock carcasses can be suggested as an alternative to the current domestic burial-centered livestock carcass treatment method, preventing environmental pollution, and contributing to public health.