• International Journal of Precision Engineering and Manufacturing
• /
• 제9권3호
• /
• pp.18-21
• /
• 2008

The study deals with the effects of parameters in the synthesis of carbon nanotubes in liquid nitrogen to find the most appropriate conditions such as electrical voltage and time that give carbon nanotubes with large volume and less proportion of impurity, which is a non-nanotubed carbon. The experiment employed the method of arc-discharge between graphite cathode and anode which are immersed in liquid nitrogen. The electrical DC current of 60A and 70A were applied with the time period ranging from 10 seconds to 25 seconds. It was found that the electrical current of 60A and 13 seconds arc-discharge time allowed the largest volume of carbon nanotubes generation. The longer time leads to more impurities around the carbon nanotubes. By the filtration of CNTs-suspended solution using 0.2 micrometers porous paper filter and the characterization using TEM, the carbon nanotubes synthesized in the study were approximately 25 layers multi-walled nanotubes with the average diameter of 18.2 nanometers.

• 한국가스학회지
• /
• 제16권6호
• /
• pp.143-147
• /
• 2012

티타니아($TiO_2$) 나노분말의 우수한 광촉매 활성은 이를 친환경 소재로서 많은 주목을 받도록 하였다. 특히, 최근 들어 이러한 $TiO_2$의 광촉매 활성을 향상시키기 위하여 $TiO_2$ 나노분말에 금속 혹은 비금속 원소를 도핑하는 방법이 널리 시도되고 있다. 화염법, 화학기상합성법, 졸-젤법, 공침법, 이온 주입법 등 다양한 방법들이 사용되고 있으며 합성법에 따라 원소들의 도핑 거동이 달라지므로 $TiO_2$의 전자구조 및 표면성질들이 합성법의 영향을 받게 되며 광촉매 활성 역시 달라진다. $TiO_2$의 광촉매 활성은 합성법 자체에 영향을 받는 것 외에 후속의 열처리에 의해서도 달라질 수 있다. 본 연구에서는 우수한 광촉매 활성을 가진 $TiO_2$ 나노분말 소재를 제조하기 위하여 화학기상합성법(chemical vapor synthesis, CVS)으로 텅스텐(W) 원소가 도핑된 $TiO_2$ 나노분말을 제조하고 물성 및 광촉매 특성을 조사하였다. 일부의 $TiO_2$ 나노분말은 $300^{\circ}C{\sim}700^{\circ}C$ 범위에서 열처리한 후 물성 및 광촉매 특성의 변화를 조사하였다.

• 한국결정성장학회지
• /
• 제32권3호
• /
• pp.96-102
• /
• 2022

수산화칼슘(Ca(OH)₂)과 인산(H₃PO₄) 수용액을 반응시켜 수산화아파타이트(hydroxyapatite, HAp)를 합성하였다. 3 M 이상의 고농도 수산화칼슘원료를 전구체로 사용하고 인산 첨가속도, 반응용액 유지시간, 반응생성물에 대한 볼밀링, 합성 후 열처리 같은 합성조건을 변화시켜 HAp를 합성하였다. 인산 첨가속도에 관계없이 상온에서 합성할 경우 주된 불순물상(phase)인 DCPD(dicalcium phosphate dihydrate)가 형성되었고, 700℃ 이상 가열 시 β-TCP(tricalcium phosphate)가 합성되기 시작해 900℃에서 그 양이 최대가 되었다. 합성된 분말을 1150℃에서 소결 할 경우에도 고온안정 불순물 상인 β-TCP 상은 없어지지 않고 남아있었다. 합성 수용액에 대한 볼밀링 후 3일 간 그 용액을 유지할 경우 DCPD 상이 없는 단일 HAp 상을 얻을 수 있었으며, 유지시간 없이 합성물에 대한 볼밀링 과정만을 거친 경우에도 500℃ 이상 열처리를 통해 β-TCP 상이 없는 단일상의 HAp를 얻을 수 있었다. 이러한 추가적인 볼밀링 과정을 적용함으로써 HAp를 손쉽게 합성할 수 있었다.

• International journal of advanced smart convergence
• /
• 제11권2호
• /
• pp.64-70
• /
• 2022

In recent years, with the continuous innovation and upgrading of engine software, the real-time rendering technology in film and television has been continuously improved, and the virtual production technology has also developed rapidly. This paper introduces the green screen often used in traditional film production and a virtual production technology based on light-emitting-diode background wall that was proposed and implemented last year. We analyzed the two production methods of virtual production and compared their characteristics. Based on these results, we can better understand the differences and respective advantages of the two production methods. And we also can according to the production budget, production cycle and the creative and technical capabilities of the team make better choices during the production process. We believe virtual production technology will be production in the future to provide a more solid technical guarantee for the development of the film industry, and this work will pave the way for further research on virtual production technology.

• 한국군사과학기술학회지
• /
• 제17권1호
• /
• pp.57-63
• /
• 2014

In this paper, we have proposed a wide band antenna for manpack SDR(Software Defined Radio). The proposed antenna consists of feeding post, flexible gooseneck and two radiating elements composed of a upper and lower radiators. The upper radiator has a longer electrical length than the lower radiator in order to operate in the lower frequency. Also, the resonant frequency and impedance characteristics of the antenna can be adjusted independently for two radiators. Therefore, the proposed antenna can be achieved wide impedance bandwidth by the combination of two independent resonance modes. To analyze the characteristics of the antenna in the design process is employed the equivalent circuit theory and EM(Electro-Magnetic) simulation. The measurement results show that the proposed antenna have the sufficient wide bandwidth, above -3.4dBi of the gain and fairly good radiation pattern over the wide bandwidth.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권7호
• /
• pp.992-997
• /
• 2002

Two in vivo experiments were conducted to evaluate the effect of novel urease inhibitor hydroquinone (HQ) on ammonia release rate from urea hydrolysis, nitrogen balance, nutrient digestibility and efficiency of microbial protein synthesis. In Exp. 1, twelve crossbred cannulated lambs were randomly assigned within initial body weight block to one of four HQ treatments, which included 0 (control), 30, 60 or 80 mg HQ/kg DM intake. Ammonia concentration and pH of ruminal fluid were immediately measured at 0, 2, 4, 6 and 8 h after feeding. Increasing the dose of HQ tended (p<0.15) to linearly decrease NH3 formation. The ammonia peak concentration (2 h post-feeding) in animals receiving HQ was approximately one-half of that in animals not receiving HQ (p<0.01), and a relatively sustained ammonia release could be obtained at the dose of 30 or 60 mg HQ/kg DM. In Exp. 2, sixteen intact crossbred lambs (weight $40{\pm}0.8kg$) were used in a $2{\times}2$ factorial design experiment. The four rations consisting of soybean meal-based (SBM) or urea-based (Urea) nitrogen source with or without HQ (S1, S0, U1 and U0) were fed in digestion and N balance trials. Apparent digestibility of major nutrients except that of ADF was not affected by either nitrogen source or addition of HQ. Regardless of nitrogen source, supplementation of HQ significantly improved ADF digestibility (p<0.05). The various ration had no effects on N metabolism in the presence of HQ. There was significant difference between total purine derivatives (PD), estimated efficiency of microbial N synthesis (p<0.05) and urea-N excretion (p<0.01) in the urine for the SBM ration and for the Urea ration. However, HQ had little influence on efficiency of microbial N synthesis as proportion of daily intake of total tract digestible OM (p>0.05). No interactions between main nitrogen source and HQ were measured throughout the trial. Results of this study suggest that addition of HQ to ration may improve ADF digestion with having no negative effect on N metabolism and microbial protein production.

• Carbon letters
• /
• 제13권4호
• /
• pp.191-204
• /
• 2012

Carbon nanotubes (CNTs) have exceptional mechanical, electrical, and thermal properties compared with those of commercialized high-performance fibers. For use in the form of fabrics that can maintain such properties, individual CNTs should be held together in fibers or made into yarns twisted out of the fibers. Typical methods that are used for such purposes include (a) surfactant-based coagulation spinning, which injects a polymeric binder between CNTs to form fibers; (b) liquid-crystalline spinning, which uses the nature of CNTs to form liquid crystals under certain conditions; (c) direct spinning, which can produce CNT fibers or yarns at the same time as synthesis by introducing a carbon source into a vertical furnace; and (d) forest spinning, which draws and twists CNTs grown vertically on a substrate. However, it is difficult for those CNT fibers to express the excellent properties of individual CNTs as they are. As solutions to this problem, post-treatment processes are under development for improving the production process of CNT fibers or enhancing their properties. This paper discusses the recent methods of fabricating CNT fibers and examines some post-treatment processes for property enhancement and their applications.

• 멤브레인
• /
• 제22권3호
• /
• pp.191-200
• /
• 2012

불소관능기인 perfluorocyclobutane (PFCB)기를 포함하는 후술폰화 poly (arylene ether sulfone) 랜덤 공중합체를 다공성 Polytetrafluoroethylene (PTFE) 막에 함침시켜 새로운 복합막을 제조하였다. 후술폰화 랜덤 공중합체는 trifluorovinyloxy 그룹을 양말단에 포함하는 biphenyl계와 sulfonyl계 단량체로부터 제조되었는데, biphenyl계와 sulfonyl계의 비율을 6 : 4와 4 : 6으로 조절 후 중부가반응 형태의 열중합과 chlorosulfonic acid (CSA)를 이용한 후술폰화 반응을 통하여 얻어졌다. 이렇게 제조된 랜덤 공중합체의 농도를 달리하면서(5~20 wt%) 다공성 PTFE 막에 함침시켜 복합막을 제조하였고, 이온 교환 능력(IEC), 함수율, 이온전도도를 측정하여 강화되지 않은 랜덤공중합체 및 Nafion과 비교하였다. 제조된 단량체 및 고분자의 구조와 순도는 각각 $^1H$-NMR, $^{19}F$-NMR와 FT-IR를 통하여 확인하였으며, 제조된 복합막의 형태는 SEM으로 관찰하였다.

• Nano
• /
• 제13권10호
• /
• pp.1850114.1-1850114.7
• /
• 2018

Here we report an optimized hot-injection method and a phase transfer strategy for the synthesis of water-soluble $CuInS_2$ QDs with desired properties. The structure and morphology studies demonstrate that the resulting QDs are $CuInS_2$ tetragonal phase with well-defined facets. It is also found that the crystal size gradually increases with the increase of reaction temperature, while the surface of QDs with pre- and post-phase transfer is functionalized with hydrophobic and hydrophilic ligands, respectively. Spectroscopy measurements reveal the size-dependent optical properties of $CuInS_2$ QDs, demonstrating the quantum confinement effect in this system.

• 농약과학회지
• /
• 제9권1호
• /
• pp.108-111
• /
• 2005

N-[4-Cyano-2-fluoro-5-(2-pyrimidinyloxy, 2-benzyloxy 혹은 2-pyridinyloxy)phenyl]-3,4,5,6-tetrahyophtha-limide 유도체를 합성하였고, 밭 조건에서 토양 및 경엽처리후의 제초활성을 온실에서 조사하였다. 이 화합물들의 제초효과는 토양처리보다 경엽처리에서 강하였으며, 광엽 잡초에 대한 제초활성이 화본과 잡초에 대한 활성보다 우수하였다. N-[(4-cyano-2-fluoro-5-(2-pyrimidinyloxy)phenyl]-3,4,5,6-tetrahydrophthalimide가 가장 강한 제초활성을 나타내었을 뿐 만아니라 60 g/ha 농도의 토양처리에서 옥수수에 비교적 안전하였다.