• Journal of Mushroom
• /
• v.10 no.4
• /
• pp.198-202
• /
• 2012

Recently, Pleurotus eryngii, King oyster mushroom, is main item of exportation in South Korea. For safe transportation to Europe and USA, it is necessary to elucidate suitable conditions of storage and treatment of post-harvest during long shipping period. For the selection of suitable package type, P. eryngii were stored at $0^{\circ}C$ and $4^{\circ}C$ after trimming and non-trimming package. Whole mushroom were packed with polypropylene anti-fog film about 400g. The weight loss ratio and elongation of pileus were increased with increasing storage time and temperature. There were little differences between trimming and non-trimming type in freshness at low temperature storage, $0^{\circ}C$ and $4^{\circ}C$. However, the freshness of non-trimming type P. eryngii at room temperature after low temperature storage is longer than that of trimming type. It was found that the optimum storage temperature and post-harvest treatment of P. eryngii were $4^{\circ}C$ and non-trimming type, respectively.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.450-452
• /
• 2001

In this paper, we proposed the automatic postal drop-off system based on the microprocessor board or PC. The weight of the small postal package is transmitted from the electronic scale and user-entered addresses and delivery rate are processed by the controller to calculate the fee. For 24 hour out-door operation and maintenance, non-cash payment methods such as credit card payment is used. The post stamp and receipt are printed by the thermal printer. For the electronic processing of the parcel, serial code is also printed on the stamp and receipts in bar code format. The parcel information obtained by the automatic postal drop-off system is transferred to remote central system by dial-up modem shared by the on site office. The proposed system and its control software are built for prototype model operation and the result met the design requirements. For real time processing, data reception through three serial ports is handled by interrupt routine. The proposed system is expected to be applied for commercial logistics system and pc automation system.

• Fashion & Textile Research Journal
• /
• v.14 no.1
• /
• pp.64-74
• /
• 2012

The purpose of this study was to find purchase appraisal standard and post-purchase satisfaction for natural dyeing products. The data used for this study were collected from the women in their from 20's to 50's who are living in the regions of Busan, Ulsan, and Gyeongnam in Korea. The questionnaire of 537 copies was used for a statistical analysis. To analyze data, 2-test, t-test, Cronbach's a test, factor analysis, ANOVA, Duncan test, regression analysis, etc. were carried out. A used statistical package was SPSS 14.0. The analysis results were as follows. The purchase appraisal standards for natural dyeing products were identified as practicality and reliability, suitability of use, symbolic property of status, design property, and convenience of buying. As the analysis result for purchase appraisal standard according to the demographic characteristics, the purchase appraisal standard according to most demographic characteristics showed significant difference. The factors of post-purchase satisfaction for natural dyeing products were verified as product modification and durability, design and price, hygienic property and product quality. As the analysis results of post-purchase satisfaction for natural dyeing products according to demographic characteristics, the post-purchase satisfaction according to demographic characteristics showed significant difference. The factors affecting post-purchase satisfaction were verified as product quality, kinds of item, color change, product lifespan, color change, etc. Consequently, because the purchase appraisal standard of natural dyeing product is very various, it is necessary to enhance post-purchase satisfaction of natural dyeing products by reflecting these factors in advance at the product development stage.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.4
• /
• pp.32-36
• /
• 2002

In this paper, a numerical methodology for health monitoring of weldment was proposed using finite element method coupled with continuum damage mechanics. The welding-induced residual stress distribution of T-joint weldment was calculated using a commercial finite element package SYSWELD+. The distribution of latent damage was evaluated from the stress and strain components taken as the output of a finite element calculation. Numerical examples were given to demonstrate the usefulness of this so-called "post-processing approach" in the case of welding-induced damage assessment.

• Journal of the Korean Society of Industry Convergence
• /
• v.2 no.2
• /
• pp.41-49
• /
• 1999

In general, FORTRAN is used for numerical analysis and OPS5 or LISP is used for expert systems, This causes problems at the interface because the various applications require different computing languages or environments. This paper describes the approach used to take AutoCAD as a user-interface for an existing finite element structural analysis package. Some principles concerning database management related to data-exchange interface of pre- and post-processing system for FORTRAN structural analysis program are discussed, and numerical examples demonstrate the power of the combination of these programs.

• Journal of Ship and Ocean Technology
• /
• v.4 no.3
• /
• pp.33-45
• /
• 2000

A computational system for wave and viscous flow analysis (WAVIS) has been developed. The system includes a pre-processor, flow solvers and a post-processor. The pre-processor is composed of full form presentation, surface mesh and field grid generation. The flow solvers are for potential and viscous flow calculation. The post-processor has graphic utility for result analysis. All the programs are integrated in a GUI-launcher package. To validate the developed CFD programs of WAVIS, the calculated results for modern commercial hull forms are compared with measurements. It is found that the results from WAVIS are in good agreement with the experimental data, illustrating the accuracy of the numerical methods employed for WAVIS.

• Journal of Advanced Research in Ocean Engineering
• /
• v.1 no.4
• /
• pp.211-226
• /
• 2015

Membrane type Mark III cargo containment system (CCS) is considered in this study to investigate its strength capability under applied loads due to liquefied natural gas (LNG) cargo. A rectangular plated structure supported by inner hull structure is exemplified from Mark III CCS according to classification society's guidance and it is assumed as multi-layered structure by stacking plywood, triplex, reinforced polyurethane (PU) foam and series of mastic upon inner hull structure. Commercially available general purpose finite element analysis package is used to have reliable FE models of Mark III CCS plate. The FE models and anisotropic failure criteria such as maximum stress, Hoffman, Hill, Tsai-Wu and Hashin taking into account the direction dependent material properties of Mark III CCS plate components and their material properties considering a wide variation of temperature due to the nature of LNG together form the strength analysis procedure of Mark III CCS plate. Strength capability of Mark III CCS plate is understood by its initial failure and post-initial failure states. Results are represented in terms of failure loads and locations when initial failure and post-initial failures are occurred respectively. From the results the basic design information of Mark III CCS plate is given.

• Korean Journal of Oriental Medicine
• /
• v.18 no.2
• /
• pp.55-64
• /
• 2012

Objectives: This study was performed to review the use of statistical analysis methods for the Traditional Korean Medicine studies listed on the Korea Citation Index from 1999 to 2008. Methods: A total of 4217 studies published on four journals of Traditional Korean Medicine were screened and 2682 articles using statistical methods were selected for the review. The selected studies were analysed according to their published year, statistical method and statistical package for use. Results: Statistical methods were used steadily in 64.6% of the articles after 2001, the most used statistical methods(57%) were mean difference comparison between 2 groups. The number of statistical methods mostly used in one article was identified as one in 1931 articles (72.0%). Duncan (36.8%) and Tukey (26.5%) were used for the ANOVA post hoc analysis. SPSS was most frequently used 68% out of Statistical package programs.(the number of mean difference comparison among more than 3 groups was continuously increasing and that makes post hoc being used. skills of statistical methods need to be diversified.) Conclusion: The interest on the proper use of statistical analysis in the research is increasing. This study will contribute to the Evidence-based Teaching on research methodology in Traditional Korean Medicine.

• Structural Engineering and Mechanics
• /
• v.67 no.6
• /
• pp.643-658
• /
• 2018

In this paper, we introduce a new framework for running the finite element (FE) packages inside an online Loop together with MATLAB. Contrary to the Hardware-in-the-Loop techniques (HiL), in the proposed Software-in-the-Loop framework (SiL), the FE package represents a simulation platform replicating the real system which can be out of access due to several strategic reasons, e.g., costs and accessibility. Practically, SiL for sophisticated structural design and multi-physical simulations provides a platform for preliminary tests before prototyping and mass production. This feature may reduce the new product's costs significantly and may add several flexibilities in implementing different instruments with the goal of shortlisting the most cost-effective ones before moving to real-time experiments for the civil and mechanical systems. The proposed SiL interconnection is not limited to ABAQUS as long as the host FE package is capable of executing user-defined commands in FORTRAN language. The focal point of this research is on using the compiled FORTRAN subroutine as a messenger between ABAQUS/CAE kernel and MATLAB Engine. In order to show the generality of the proposed scheme, the limitations of the available SiL schemes in the literature are addressed in this paper. Additionally, all technical details for establishing the connection between FEM and MATLAB are provided for the interested reader. Finally, two numerical sub-problems are defined for offline and online post-processing, i.e., offline optimization and closed-loop system performance analysis in control theory.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.1
• /
• pp.33-41
• /
• 2011

This study presents modeling technologies applicable to an unbonded post-tension system using a finite element software package. In this study, both direct modeling method and multiple spring method were used. The direct modeling method adopts tube-to-tube contact elements to represent the physical feature of a post-tension system. The multiple spring method uses virtual tendons attached to the real tendons using a number of rigid axial springs that freely rotate at the ends. Both modeling technologies provide accurate predictions. However, only the multiple spring method provides numerically stable and reliable responses with a consideration of concrete tension stiffening effects. Therefore, the multiple spring method turned out to be a generally applicable modeling technology for the unbonded post-tension system. Comparisons were made for the analytical and experimental results for the verification of the selected method, and parameter studies were carried out to confirm the appropriateness of the modeling assumptions and parameters adopted in the analysis.