• Journal of Korean Institute of Industrial Engineers
• /
• v.23 no.1
• /
• pp.95-113
• /
• 1997

This paper outlines a framework for a diagnosis of a complex system with uncertain information. Sensor validation ploys a vital role in the ability of the overall system to correctly determine the state of a system monitored by imperfect sensors. Here, emphases are put on the heuristic technology and post-processor for reasoning. Heuristic Sensor Validation (HSV) exploits deeper knowledge about parameter interaction within the plant to cull sensor faults from the data stream. Finally the modified probability distributions and validated data are used as input to the reasoning scheme which is the runtime version of the influence diagram. The output of the influence diagram is a diagnostic mapping from the symptoms or sensor readings to a determination of likely failure modes. Once likely failure modes are identified, a detailed diagnostic knowledge base suggests corrective actions to improve performance. This framework for a diagnostic expert system with sensor validation and reasoning under uncertainty applies in $HEATXPRT^{TM}$ a data-driven on-line expert system for diagnosing heat rate degradation problems in fossil power plants [1].

• 한국전산유체공학회:학술대회논문집
• /
• 2007.04a
• /
• pp.99-102
• /
• 2007

NUFLEX is a general purpose program for the analysis 3D thermo/fluid flow and pre/post processor in a complex geometry. NUFLEX is composed various physical models, such as phase change(solidification/melting) and spray, MHD(Magneto Hydraulic Dynamics) models. It is possible to simulate of continuous cast iron process and spray droplet breakup/collision phenomenon. For the verification of these models, compared with the experimental data and commercial CFD code's results. The results show good agreements with experimental and comercial CFD codes's results.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.7
• /
• pp.98-105
• /
• 2000

In this study, we developed rotating machine vibration condition monitoring system based upon Windows NT and DSP Board. Developed system includes signal analysis module, trend monitoring and simple diagnosis using threshold value. Trend analysis and report generation are offered with database management tool which was developed in MS-ACCESS environment. Post-processor, based upon Matlab, is developed for vibration signal analysis and fault detection using statistical pattern recognition scheme based upon Bayes discrimination rule and neural networks. Concerning to Bayes discrimination rule, the developed system contains the linear discrimination rule with common covariance matrices and the quadratic discrimination rule under different covariance matrices. Also the system contains k-nearest neighbor method to directly estimate a posterior probability of each class. The result of case studies with the data acquired from Pyung-tak LNG pump and experimental setup show that the system developed in this research is very effective and useful.

• Journal of Biomedical Engineering Research
• /
• v.22 no.2
• /
• pp.187-195
• /
• 2001

시각자극 유발전위 추론시에 사용되는 평균법은 많은 회수의 단일-시도 유발전위(single-trial evoked potential)의 기록이 필요하다. 본 논문에서는 이러한 평균법의 후처리기로서 Prony 방법을 적용하여 향상된 신호-대-잡음비를 제공하는 방법을 제안하였다. Prony 방법은 유발전위와 같은 잡음이 섞여 있는 신호에서 지수함수를 추론하는데 많이 적용되어져 왔다. 여러 가지 잡음 모델을 이용한 시뮬레이션과 실제 시각자극 유발전위 데이터를 이용한 실험을 통해 Prony 방법이 평균법의 후처리기(post-processor) 기능으로서 사용될 때, 신호의 질적인 향상 측면 뿐 아니라 평균법 사용시 단일-시도 유발전위의 기록 횟수의 단축이라는 결과도 가져옴을 보였다.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.251-256
• /
• 2015

In this paper, an systematic approach is presented, in which the bridge-type traffic sign structure is body out by CSDDA PrePost Processor. There is dead load and wind load that is working on the structure which will make force and moment. Analyzied the stress distribution of the standard form and by changing the shape, compared the safety in terms of deflection and stress (with the standard form) to know the effect of each component in the bridge-type traffic sign structure. The safety of deflection and stress is evaluated by maximum distance/100) and ASIC code respectively. The standard form of bridge-type traffic sign structure is established by two pairs of pillar and two pairs of floor beam. Replaced the links which is consist of flange and screws as the torsion spring and nm our analysis program. By adjusting variable of rigidity modulus of torsion spring, moment between column and beam is controled depending on value of rigidity modulus.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.6
• /
• pp.278-282
• /
• 2012

Photovoltaic systems have emerged to be one of the cleanest energy systems. Therefore, many large scale solar parks and PV farms have been built to prepare for the post fossil fuel ages. However, due to their large scale, to efficiently manage and operate PV systems, they need to be visually monitored within the range of infrared ray through the Internet. To satisfy this need, the efficient implementation of a high performance video compression standard is required. This paper therefore presents an implementation of H.264 motion estimation, which is one of the most data-intensive and complicated functions in H.264. To achieve this, this work implements vector instructions in hardware and incorporates them in a generic RISC processor architecture, thus increasing the processing speed while minimizing hardware and software design efforts. Extensive simulation results show that this proposed implementation can process motion estimations up to 13 times faster.

• Transactions of Materials Processing
• /
• v.9 no.6
• /
• pp.567-573
• /
• 2000

An analysis system for evaluating the design of dieface of stamping press dies is developed. The die design analysis system interfaced with CATIA via universal or NASTRAN data format provides the design information such as binder-wrap, punch contact status, section length change ratio, wrinkle symptom etc., which are crucial in predicting the defects of initial shape of the sheet in the dieface design stage. The graphic post-processor of developed system which displays 3-dimensional shapes of tool and die and analysis results, helps the interpretation of design evaluation. The dieface design analysis system was tested in draw dies of front floor panel and quarter panel of auto-body in order to verify the usefulness and validity of the system The examples show that the developed system would be a good tool in evaluating dieface designs.

• Proceedings of the KOSOMBE Conference
• /
• v.1993 no.05
• /
• pp.66-69
• /
• 1993

We have developed a software package for the analysis of electric field distribution in human body. It includes the graphical finite element mesh generator, linear system of equations solver using sparse matrix and vector technique, and post-processor for the display of the results. This software package can be used in various research areas of biomedical engineering where we inject current or apply voltage to human body. The software package was developed on Macintosh II computer and the size of the model is only limited by the main memory.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.223-225
• /
• 1999

The procedure of optimum design is consist of a system analysis module, an optimum design module and an optimizing method module. In this paper, the method to connect the system analysis module with the optimizing method module using the self script language of OPERA has been provided. Optimum design for a magnet whose central field must be 27 has been carried out with the presented method. OPERA Pre/Post-processor has been used as a system analysis module and mixed decent/gradient method as an optimizing method.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.9
• /
• pp.712-718
• /
• 1991

In this paper, we propose a graphic system for high speed generation of bitmap font data from the outline font data such as PostScript, etc. In desk-top publishing system. A VLSI chip called KAFOG was designed for the high-speed calculation of a cubic Bezier curve, which was implemented in 1.5\ulcorner CMOS gate array using 17,000 gates. A cubic Bezier curve is approximated by a set of line segments in KAFOG at the throughput of 250K curves per second with the clock frequency of 40 MHz. A prototype graphic system was developed using two MC6800 microprocessors and the KAFOG chip. Two microprocessors cooperate in a master and slave mode, and handshaking is used for communication between two processors. KAFOG chip, being controlled by the slave processor, operates as a coprocessor for the calculation of the outline font. The throughput of the prototype graphic system is 40 64$\times$64 outline fonts per sencond.