• 한국전자파학회논문지
• /
• 제18권11호
• /
• pp.1262-1270
• /
• 2007

본 논문에서는 feedforward와 post-distortion 기법을 이용하여 평형 증폭기 내에서 발생하는 혼변조 왜곡 성분을 제거할 수 있는 새로운 왜곡 상쇄 메커니즘인 cross post-distortion 선형화 기법을 제안한다. 출력 동적 영역과 대역폭 측면에서 제안하는 선형화 방식은 기존의 feedforward 방식에 뒤지지 않는 성능을 가지고 있으면서 상대적으로 높은 효율을 제공한다. 이론적 뒷받침을 위해 제안하는 시스템과 feedforward 방식의 전력 증폭기와 오차증폭기의 전력 용량을 비교 분석하였고, IMT-2000 대역에서 실제 구현을 통하여 이를 실험적으로 뒷받침하였다. 최대 출력 전력 240 W의 기지국용 상용 대전력 증폭기에 적용했을 때, wideband code division multiple access (WCDMA) 4FA 신호에 대하여 평균 출력 전력 40 dBm에서 약 18.6 dB의 개선 효과를 얻었다. 제작된 전력 증폭기는 WCDMA 신호 기준으로 feedforward 방식에 비해 약 2 % 개선된 효율을 보였다.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2258-2271
• /
• 2016

In this paper, some crucial performance characteristics related to the operational reliability of the post-fault Pulse Width Modulated (PWM) rectifiers, such as line current harmonic distortion, Common Mode Voltage (CMV), and current stress on the capacitors, are fully investigated. The aforementioned performance characteristics of post-fault rectifiers are highly dependent on the utilized space vector modulation (SVM) schemes, which are also examined. Detailed analyses of the three most commonly used SVM schemes for post-fault PWM rectifiers are provided, revealing the major differences in terms of the zero vector synthesis approaches. To compare the performances of the three SVM schemes, the operating principles of a post-fault rectifier are presented with various SVM schemes. Using analytical and numerical methods in the time domain, the performances of the line current distortion, common mode voltage and capacitor current are evaluated and compared for each SVM scheme. The proposed analysis demonstrates that the zero vector synthesis approaches of the considered methods have significant impacts on the performance characteristics of rectifiers. In addition, the advantages and disadvantages of the proposed SVM schemes are discussed. The experimental results verify the effectiveness and validity of the proposed analysis.

• 보존과학회지
• /
• 제38권1호
• /
• pp.14-32
• /
• 2022

Underwater photographing and image recording are essential for pre-excavation survey and during excavation in underwater archaeology. Unlike photographing on land, all underwater images suffer various quality degradations such as shape distortions, color shift, blur, low contrast, high noise levels and so on. Outcome is very often heavily photographing equipment and photographer dependent. Excavation schedule, weather conditions, and water conditions can put burdens on divers. Usable images are very limited compared to the efforts. In underwater archaeological study in very turbid water such as in the Yellow Sea (between mainland China and the Korean peninsula), underwater photographing is very challenging. In this study, off-site image distortion and color compensation techniques using an image processing/analysis software is investigated as an alternative image quality enhancement method. As sample images, photographs taken during the excavation of 800-year-old Taean Mado Shipwrecks in the Yellow Sea in 2008-2010 were mainly used. Significant enhancement in distortion and color compensation of archived images were obtained by simple post image processing using image processing/analysis software (PicMan) customized for given view ports, lenses and cameras with and without optical axis offsets. Post image processing is found to be very effective in distortion and color compensation of both recent and archived images from various photographing equipment models and configurations. Merits and demerit of in-situ, distortion and color compensated photographing with sophisticated equipment and conventional photographing equipment, which requires post image processing, are compared.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.383-384
• /
• 2006

The P-ECLMS algorithm adapted the existing Post-Processing method occurs the distortion of the near-end signal at the double-talk situationt. To solve this problem, we propose the SP-ECLMS(Selective Post-Processing ECLMS) algorithm which makes the Post-Processing coefficient differently at the case of the single-talk and the double-talk. When the correlation level is not output less than 30%, the proposed algorithm output the original signal to prevent the signal's distortion.

• 대한전자공학회논문지SP
• /
• 제44권2호
• /
• pp.137-143
• /
• 2007

기존의 후처리 기법을 그대로 적용한 P-ECLMS(Post-Processing Expand Correlation LMS) 알고리즘은 동시통화환경에서 근단신호의 왜곡을 발생 시킨다. 이러한 문제를 해결해주기 위해 단일통화의 경우와 동시통화의 경우 후처리계수를 달리 하여 주는 SP-ECLMS(Selective Post-Processing ECLMS) 알고리즘을 제안한다. 상관도가 30% 이상 나을 때는 신호의 왜곡을 방지하기 위해 원래의 신호를 출력시키도록 하고 상관도가 그 이하일 경우는 후처리 값을 그대로 가중 값으로 적용하여 단일 통화 환경의 잔여반향을 줄여준다. 따라서 통화시간의 대부분인 단일통화환경에서의 잔여반향을 감소시키고 동시통화환경에서도 안정적 통신채널을 유지하도록 한다.

• Steel and Composite Structures
• /
• 제35권6호
• /
• pp.717-727
• /
• 2020

The homotopy perturbation method (HPM) to predict the pre- and post-buckling behaviour of simply supported steel beams with rectangular hollow section (RHS) is presented in this paper. The non-linear differential equations solved by HPM derive from a kinematics where large twist and cross-sections distortions are considered. The results (linear and non-linear paths) given by the present HPM are compared to those provided by the Newton-Raphson algorithm with arc length and by the commercial FEM code Abaqus. To investigate the effect of cross-sectional distortion of beams, some numerical examples are presented.

• 한국방사선학회논문지
• /
• 제10권5호
• /
• pp.359-365
• /
• 2016

투시조영촬영은 인체 내부의 조직이나 장기를 검사할 때 시행하며 특히 척추 질환의 진단 및 시술에 사용된다. 영상증배관(image intensifier tube)을 사용하는 투시조영 촬영장비는 영상에서 중심부보다 주변부에 왜곡이 나타난다. 본 연구에서는 교정 알고리즘을 적용하여 교정전과 교정후의 수직길이비 왜곡비율과 대각길이비의 왜곡비율을 측정하였다. 수직길이비의 측정결과는 교정후의 표준편차가 교정전보다 0.04감소하였고 대각길이비의 측정결과는 교정후의 표준편차가 교정전보다 0.06감소하여 교정 후 투시영상의 왜곡이 감소되었다. 향후 교정 알고리즘의 적용과 성능향상을 통해서 영상왜곡을 감소시키면 요추디스크의 치료를 위한 수핵감압술시 요추천자의 정확한 위치를 찾는데 도움을 줄 것으로 사료된다.

• Structural Engineering and Mechanics
• /
• 제2권1호
• /
• pp.113-123
• /
• 1994

A method for computing the elastic buckling prestressing force of a post-tensioned composite steel-concrete tee-beam is presented. The method is based on a virtual work formulation, and incorporates the restraint provided by the concrete slab to the buckling displacements of the steel beam. The distortional buckling solutions are shown to be given by a quadratic equation. The application of the analysis to calculation buckling strengths is given, based on codified rules for beam-columns. Conclusions are then drawn on the importance of distortional buckling when a post-tensioned composite beam is stressed during jacking.

• International Journal of Automotive Technology
• /
• 제4권1호
• /
• pp.31-40
• /
• 2003

W-beam guardrail system has been the most popular roadside safety device around the world. Through large plastic deformation and corresponding energy dissipation, a W-beam guardrail system contains and re-directs out-of-control vehicles so as to reduce the impact damage on the vehicle occupants and the vehicles themselves. In this paper, our recent experiments on 1 : 3.75 downscaled W-beam and the beam-post system are reported. The static and impact test results on the load characteristics, the global response and the local cross-sectional distortion are reveled. The effects of three different end-boundary conditions for the beam-only testing are examined. It is found that the load characteristics are much dependent on the combined contribution of the local cross-sectional distortion and the end-supporting conditions. The energy Partitioning between the beam and the supporting Posts in the beam-Post-system testing were also examined. The results showed that the energy dissipation partitioning changed with the input impact energy. Finally, a simple mass-spring model is developed to assess the dynamic response of a W-beam guardrail system in response to an impact loading. The model's prediction agrees well with the experimental results.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.43-48
• /
• 2003

The problem of welding stresses and fatigue behavior is the main concerns of welding research fields. The residual stresses and distortion of structures by welding is exert negative effect on the safety of mechanical structures. That is, expansion of material by high temperature and distortion by cooling during welding process is caused of tensile and compressive residual stresses on welding material, and this residual stresses reduce fracture and fatigue strength of welding structures. The accurate prediction of residual stress and relaxation due to loading and post weld heat treatment of weld zone is very important to improve the quality of weldment. In this study, a finite element modeling technique is developed to simulate the relaxation of residual stresses due to loading and post weld heat treatment of weld zone. The accuracy of finite element models is evaluated based on experimental results and the results of the analytical solution.