• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.6
• /
• pp.96-102
• /
• 2004

The diesel particulate filter(DPF) is effective for particulate removal from diesel engine under a variety of conditions, and then the regeneration strategies is very important in the aspects of engine fuel consumption and engine durability. This paper addresses the changes of Peugeot 406 vehicle engine parameters(fuel injection timing, period, rail pressure, emissions exhaust temperature so on) during DPF regeneration. additionally, checked the soot loading mass with mileage and the change of fuel consumption and performance with ash accumulation.

• YAKHAK HOEJI
• /
• v.15 no.2
• /
• pp.53-63
• /
• 1971

A water-soluble basic extract was obtained from Zizyphi spinosi semen and tested on its sedative and psychotropic activities. In a 2.2m $\times$ 2.2m $\times$ 0.8m open-field, the effect of the extract on unlearned emotional responses of mice was determined. Intraperitoneal injection of 5mg/kg, 10mg/kg, and 20mg/kg of the extract caused to show less often the frequency of ambulation, rearing and exploration and more the frequency of lying and sleeping than that of placebo control, meprobamate and chlordiazepoxide treated groups. In a standard shuttle box, the effect of the extract on learned emotional responses was determined. Intraperitoneal injection of 10mg/kg of the extract caused to show less conditioned response, secondary conditioned response and defecation than either placebo control or pre- and post-treated sessions with the extract throughout the acquisition and extinction of conditioned avoidance response. Intraperitoneal injection of 10mg/kg of the extract showed similar sedative actions with that of 1.25mg/kg of chlorpromazine. The extract shows major tranquilizer-like effect as chlorpromazine.

• Archives of Craniofacial Surgery
• /
• v.19 no.3
• /
• pp.218-221
• /
• 2018

Patients complaining of swelling and hematoma caused by contusion of the face can be easily seen in the emergency room. Most of the treatments were conservative treatments such as ice bag application, mild compression dressing, and massage. During the follow-up, fibrosis progression due to hematoma was frequently observed in the contusion site. When hematoma or fibrosis is confirmed, hyaluronidase (H-lase) 1,500 IU and 2 mL of normal saline were mixed and subcutaneously injected in crisscross manner. To evaluate the improvement of hematoma before and after hyaluronidase injection, three plastic surgeons evaluated using the Vancouver scar scale and compared preoperative and postoperative images. Hematoma and fibrosis after facial trauma improved after hyaluronidase injection for early treatment.

• Restorative Dentistry and Endodontics
• /
• v.33 no.6
• /
• pp.499-506
• /
• 2008

The purpose of this study was to compare the push-out strength of a fiber post cemented with various resin cements. Newly extracted 36 human mandibular premolars which had single root canal were selected and their crown portions were removed. The root canal was instrumented using $PROTAPER^{TM}$ system and obturated using continuous wave technique. In each root, a 9-mm deep post space was prepared. #2 translucent fiber post (DT Light post, Bisco Inc., Schaumburg, IL, U.S.A.) was cemented using injection technique with Uni-dose needle tip (Bisco) and six different resin cements. The tested resin cements were Duo-Link (Bisco Inc., Schaumburg, IL, U.S.A.), Variolink II (Ivoclar-Vivadent AG, Schann, Liechtenstein), Panavia F (Kuraray Medical Inc., Okayama, Japan), Multilink Automix (Ivoclar-Vivadent AG, Schann, Liechtenstein), RelyX Unicem (3M ESPE Dental Products, St. Paul, MN, U.S.A.), and Maxcem (Kerr Co., CA, U.S.A.). After storage in distilled water for 24 hours, each root was transversally sectioned into approximately 1-mm thick sections. This procedure resulted in 6 serial sections per root. Push-out test wasperformed using a universal testing machine (EZ Test, Shimadzu Co.) with a crosshead speed of 1 mm/min. The data were analyzed with one-way ANOVA and Tukey HSD (p=0.05). The push-out strength of the groups which cemented fiber post with Panavia F and Multilink Automix were lower than those of the other groups. But, there were no statistically significant difference among groups at a probability level of 0.05.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.1
• /
• pp.55-64
• /
• 2019

PURPOSE. The accuracy of denture bases was compared among injection molding, milling, and rapid prototyping (RP) fabricating method. MATERIALS AND METHODS. The maxillary edentulous master cast was fabricated and round shaped four notches were formed. The cast was duplicated to ten casts and scanned. In the injection molding method, designed denture bases were milled from a wax block and fabricated using SR Ivocap injection system. Denture bases were milled from a pre-polymerized block in the milling method. In the RP method, denture bases were printed and post-cured. The intaglio surface of the base was scanned and surface matching software was used to measure inaccuracy. Measurements were performed between four notches and two points in the mid-palatal suture to evaluate inaccuracy. The palatine rugae resolution was evaluated. One-way analysis of variance was used for statistical analysis at ${\alpha}=.05$. RESULTS. No statistically significant differences in distances among four notches (P>.05). The accuracy of the injection molding method was lower than those of the other methods in two points of the mid-palatal suture significantly (P<.05). The degree of palatine rugae resolution was significantly higher in the injection molding method than that in other methods (P<.05). CONCLUSION. The overall accuracy of the denture base is higher in milling and RP method than the injection molding method. The degree of fine reproducibility is higher in the injection molding method than the milling or RP method.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.4
• /
• pp.256-259
• /
• 2013

Botulinum toxin type A (BTX-A) inhibits muscle contraction, which leads to reversible muscle atrophy and paralysis. Therefore, BTX-A injection can be an effective treatment of facial asymmetry that originated from the uncoordinated muscle movement. A 52-year-old patient was referred from another hospital for the correction of post-traumatic sequelae. The patient had prominent scar in the mandibular symphysis area with asymmetric lower lip movement. The reason for this asymmetric lower lip movement was due to damage in the lower lip depressor muscle. After the injection of BTX-A on the lower lip depressors, asymmetric lip movement has been improved.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.18 no.1
• /
• pp.226-229
• /
• 2004

We investigated the comparative effect with different frequency and duration time of electroacupuncture(EA) for suppression of pain. Inflammation was induced by an intraplantar injection of 1 % carrageenan into the right hind paw. Bilateral EA stimulation with 2 Hz, 15 Hz and 120 Hz were delivered at those acupoints corresponding to Zusanli and Sanyinjiao in man via the needles in carrageenan-injected rats. The paw and tail thermal hyperalgesia were measured in 30-minute intervals after carrageenan injection using hot plate and tail flick analgesia meter, respectively. The significant difference was found between the control and any of EA frequencies examined. Especially 2 Hz EA presented more effective inhibitory effects compared with other frequency of EA in tail flick latency. The hyperalgesia induced by carrageenan was strongly inhibited by 2 Hz EA from 5 min post and reached sufficient effects from 20 min post EA treatment. These results suggest that EA treatment might be a useful therapy for mitigation of inflammatory pain.

• YAKHAK HOEJI
• /
• v.45 no.1
• /
• pp.71-77
• /
• 2001

We recently developed a high efficiency expression vectors pCK, which drives a high level of gene expression in the skeletal muscles of mice. In this study, we investigated the pharmacokinetics and biodistribution of pCK-VEGF expressing human VEGF165 after intravenous or intramuscular administration. The quantity of pCK-VEGF in the tissues of mice was measured by the PCR method which has a detection limit of approximately 1 pg of the exogenously added plasmid. In the case of intravenous administration, the half life of the pCK-VEGF plasmid in the bloodstream was 1.68 min. After intra-muscular administration, the half life of pCK-VEGF plasmid in the bloodstream was 6.78 min. At 90 min post-administration, 30% of the injected pCK-VEGF was found at the site of injection, where it persisted for up to 8 hours. Less than 1.6% of the injected pCK-VEGF plasmid DNA was detected in highly vascularized tissues such as the lung, kidney; and liver at 90 min post-administration, but the plasmid was undetectable at later time points. These results suggested that intramuscularly administrated pCK-VEGF persisted for longer periods of time in muscles than in other tissues and that direct intra-muscular injection of pCK-VEGF might be useful for local therapeutic angiogenesis.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.2 no.2
• /
• pp.68-73
• /
• 2009

Purpose: We retrospectively studied the outcomes of the shoulder impingement syndrome for the treatment of the ultrasound-guided subacromial bursal steroid injection. Materials and Methods: Sixty-six shoulders of sixty-two patients with shoulder impingement syndrome treated from March, 2006 to April, 2009 were involved in this study. All cases underwent standardized, nonoperative treatment protocol consisting of 5~12 MHz high resolution ultrasound-guided local steroid injection into the subacromial bursa in modified Crass position. The shoulder range of motion, VAS score and impingement signs were evaluated during the initial and 1year visits. After injection, shoulder elevation exercise was encouraged. Statistical analysis with ANOVA model and Tukey's post-hoc test with the significance level at 5% were performed using SAS program. Results: All cases showed improved range of motion without limitation of shoulder function at immediate post-injection, 6-week, 3-month and 1year visits. The average VAS score at one year follow-up decreased to 2.85 from 6.47 before injection. In all cases the impingement signs became negative immediate after injection. However, 6 cases showed positive impingement signs after 6-week, which became negative after reinjection. The range of motion and VAS score were improved at one-year follow-up compared to initial visit (p<0.0001). No complication was noted at all follow-up period. Conclusion: Ultrasound-guided subacromial steroid injection alleviated the need of surgery, because it was successful in all our cases to improve pain and function of the shoulders until one year follow-up period.

• Journal of Embryo Transfer
• /
• v.29 no.1
• /
• pp.59-66
• /
• 2014

Transcription activator like effector nucleases (TALENs) are artificial restriction enzymes generated by fusing a TALE DNA binding domain to a DNA cleavage domain which remove and introduce specific genes to produce transgenic animals. To investigate the efficient laboratory techniques for the injection of TALEN mRNA, pEGFP-N1 commercial plasmid were microinjected into porcine parthenogenetic and in vitro fertilization (IVF). In Experiment 1, to investigate injection time, compared 4 different time durations (2 hr, 4 hrs, 6 hrs & 8 hrs) after post activation of parthenogenetic embryos and after 6 hrs of co-incubation with sperms in IVF embryos. There were significant difference (P<0.05) in development to the blastocysts (4.4, 8.9, 3.9, 0.6%), GFP expression in blastocysts (1.3, 5.7, 2.3, 0.0%) which injected after post activation of 4 hrs compared with other 3 groups. IVF embryos after 2 hrs and 4 hrs injected were expressed GFP significantly higher than rest of two groups (P<0.05). In Experiment 2, compared development of 2 different concentrations ($20ng/{\mu}l$ and $50ng/{\mu}l$) of EGFP injection. There were significant difference (P<0.05) between two treatments which has higher cleavage (58.8 vs 41.9%), blastocysts development rate (13.0 vs 11.1%) and GFP expressed blastocysts (5.7 vs 0.0%) in $20ng/{\mu}l$ than the $50ng/{\mu}l$ in parthenogenetic embryos. In IVF embryos, only $20ng/{\mu}l$ injected embryos were expressed GFP (4.2%) after 7 days of incubation and 77.3 vs 64.7% of cleavage, 26.4 vs 23.5% development to blastocysts. In Experiment 3, three different volumes (5, 10 and 20 pl) were microinjected into porcine embryos to determine the most appropriate volume. Out of 3 groups, significantly higher development rates of cleavage (68.3, 58.0, 29.3%), blastocysts (11.7, 12.7, 0.5%) and GFP expressed blastocysts (2.9, 7.8, 0.0%) were shown in the 10 pl group (P<0.05). In conclusion, these results imply that $20ng/{\mu}l$ concentration, 10 pl of volume and injection at 4 hrs after post activation for parthenogenetic and 2~4 hrs after IVF, $20ng/{\mu}l$ concentration and 10 pl volume for IVF embryos were more effective microinjection conditions.