• Journal of The Korean Association For Science Education
• /
• v.34 no.4
• /
• pp.407-415
• /
• 2014

Genetic determinism of human behaviors is considered as a philosophical perspective that genes in humans determine biological as well as social traits. However, many biologists agree that human traits are determined by interactions between genes and genes, as well as between genes and environments. In this context, genetic determinism still affect ideas of the general public as well as research directions of biologists. According to Cl$\acute{e}$ment's KVP model (Cast$\acute{e}$ra & Cl$\acute{e}$ment, 2012), teachers' conceptions of genetic determinism influence students' concepts of genetics. This study intends to investigate teachers' conceptions on genetic determinism of human behaviors. For this end, a questionnaire adopted from a previous research (Cast$\acute{e}$ra & Cl$\acute{e}$ment, 2012) has been administered to 308 teachers including 151 pre-service and 157 in-service. Factor analysis has been conducted to extract major factors and one-way ANOVA has been employed to find out differences in extracted factors among different groups of teachers. Four factors have been extracted from 14 items of questionnaire, including factor 1, a perspective of genetic determinism of gender differences in intellectual ability, social status, and emotional traits; factor 2, a perspective of genetic determinism of individual differences in intellectual ability; factor 3, a perspective of genetic determinism of individual differences in biological immune function and behavioral trait; and factor 4, a perspective of genetic determinism of ethnic differences. From the results of One-way ANOVA among teacher groups on four factors, first, it has shown a significant difference in factor 1 (F=3.325, p=.006), factor 3 (F=3.320, p=.006) and factor 4 (F=4.325, p=.001) due to their subject matters. In post-hoc comparison there have been no significant difference between biology teachers and other teachers. It has also been found that there was a significant difference between pre-service and in-service teachers in factor 1 (t=-3.938, p=.000) and factor 4 (t=-3.121, p=.002) and in-service teachers are more genetic deterministic than pre-service teachers. Finally, different religions have no influence on teachers' conceptions of genetic determinism of human behaviors.

• Journal of Korean Home Economics Education Association
• /
• v.19 no.4
• /
• pp.57-74
• /
• 2007

The purpose of this study was to investigate differences in adolescent's academic motivation, which is composed of intrinsic learning motivation and extrinsic learning motivation, by family strengths and parent's expectation styles. The subject of this study were 508 students who were selected at random from second, and third grade of middle school in Daegu. Factor analysis and MANOVA were employed for data analysis and Scheff test for post - hoc analysis. The main findings of this study were as follows: First, there were significant differences in learning motivation of adolescents according to the degree of family strengths. More specifically, adolescents who perceived their family strengths to be high had higher intrinsic learning motivation than adolescents who perceived their family strengths to be middle and low. Second, there were significant differences in intrinsic learning motivation of adolescents according to the parent's academic expectation styles. Adolescents who perceived their parent's academic expectation styles paternal support-maternal support, paternal pressure-maternal support, and paternal support-maternal pressure showed higher intrinsic learning motivation than adolescents who perceived their parent's academic expectation styles paternal pressure-maternal pressure. Third, there were significant differences in intrinsic learning motivation of adolescents according to the parent's academic expectation styles and the degree of family strengths. In adolescents group who perceived their family strengths to be low, adolescents who perceived their the parent's academic expectation styles to be paternal support-maternal support, paternal pressure-maternal support and paternal support-maternal pressure had higher intrinsic learning motivation than adolescents who perceived their the parent's academic expectation styles to be paternal pressure-maternal pressure.

• Journal of Korean Home Economics Education Association
• /
• v.19 no.4
• /
• pp.153-173
• /
• 2007

The purpose of this study is to investigate the middle school students' allowance managing behaviors and consumer education by the educational subject in order to explore a desirable direction of consumer education for allowance management. Questionnaire survey was conducted with 468 middle school students in Gyeongnam. The major findings are as follows: First, as for recognition of consumer education, the consumer education from home was the highest, and then the from school and mass media followed in that order. Second, the average score of the students' allowance managing behavior was low. The fulfillment ability was relatively high compared to planning and evaluative ability. Third, as for overall allowance managing behaviors, the more promoted a students' level of consumer education from school and mass media, the more cultivated his/her allowance managing behaviors. As for allowance managing behaviors in accordance with sub-factors, students' planning and fulfillment abilities were more cultivated, the more promoted his/her level of consumer education from school and mass media. Students' evaluative ability was more cultivated, the more promoted his/her level of consumer education from school and mass media. Fourth, there were differences in educational contents the students wanted in accordance with the educational subjects of consumer education. The consumer education can be more practical when it is connected with home, school, and mass media, development of an educational program with such connection is necessary.

• Management & Information Systems Review
• /
• v.39 no.1
• /
• pp.35-57
• /
• 2020

Recently, research F&E(Facilities and Equipment) have become very important as tools and means to lead the development of science and technology. The government has been continuously expanding investment budgets for R&D and research F&E, and the need for efficient operation and systematic management of research F&E built up nationwide has increased. In December 2010, The government developed and completed a standardized classification system for national research F&E. However, accuracy and trust of information classification are suspected because information is collected by a method in which a user(researcher) directly selects and registers a classification code in NTIS. Therefore, in the study, we analyzed linearly using linear discriminant analysis(LDA) and analysis of variance(ANOVA), to measure the classification accuracy for the standardized classification system(8 major-classes, 54 sub-classes, 410 small-classes) of the national research facilities and equipment established in 2010, and revised in 2015. For the analysis, we collected and used the information data(50,271 cases) cumulatively registered in NTIS(National Science and Technology Service) for the past 10 years. This is the first case of scientifically verifying the standardized classification system of the national research facilities and equipment, which is based on information of similar classification systems and a few expert reviews in the in-outside of the country. As a result of this study, the discriminant accuracy of major-classes organized hierarchically by sub-classes and small-classes was 92.2 %, which was very high. However, in post hoc verification through analysis of variance, the discrimination power of two classes out of eight major-classes was rather low. It is expected that the standardized classification system of the national research facilities and equipment will be improved through this study.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.8-15
• /
• 2010

Purpose: The purpose of this study was to evaluate the effect of various methods of dentin bonding agent application and air abrasion pretreatment on microtensile bond strength between dentin and resin, using a self-etching adhesive system. Material and methods: Thirty freshly extracted human molars were obtained and divided into 6 groups of 5 teeth. A 2-step self etching adhesive system (Clearfil SE Bond) was used for all groups. The control specimens were prepared using a direct immediate bonding technique. The delayed dentin sealing specimens were prepared using an indirect approach without dentin prebonding. The immediate dentin sealing specimens were prepared using dentin prebonding immediately following preparation. Immediate dentin sealing teeth and delayed dentin sealing teeth had provisional restorations using Fermit for two weeks. Then all specimens of each group were divided into two groups of three, depending on air abrasion pretreatment. Composite "crowns" were incrementally built on and specimens were stored in water for 24 hours. All teeth were prepared for a microtensile bond strength test. Bond strength data were analyzed with a one-way ANOVA test, and post hoc comparison was done using the Scheffe's test. Results: The mean microtensile bond strengths of all groups were not statistically different from each other. Conclusion: When preparing teeth for indirect restorations, IDS and DDS with Clearfil SE bond, have no difference on the microtensile bond strength between dentin and resin. Air abrasion pretreatment did not affect the microtensile bond strength when using IDS and DDS with Clearfil SE bond.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.1
• /
• pp.1-7
• /
• 2016

Purpose: The aim of this study was to evaluate the effect of increased vertical dimension of occlusion on lower facial changes by facial type. Materials and methods: Lateral cephalograms from 261 patients were obtained and classified by sagittal (Class I, II, and III) and vertical (hypodivergent, normodivergent, and hyperdivergent) facial patterns. Retrusive displacement of soft tissue Pogonion and downward displacement of soft tissue Menton were measured in each group after 2 mm of vertical dimension of occlusion was increased at the lower central incisor using a virtual simulation program. The ratio of both displacements was calculated in all groups. The statistical analysis was done by 2-way ANOVA and Post hoc was done by Tukey test (5% level of significance). Results: Retrusive displacement of soft tissue Pogonion in Class III group was statistically different compared to Class I and II, and in vertical facial groups all 3 groups were significantly different (P<.05). Downward displacement of soft tissue Menton showed statistically significant difference between all sagittal groups and vertical groups (P<.05). The ratio of both displacements showed statistically significant difference in all sagittal groups and vertical groups (P<.05), and Class II hyperdivergent group had the highest value. Conclusion: Lower facial change was statically significant according to the facial type when vertical dimension of occlusion increased. Class II hyperdivergent facial type showed the highest ratio after increase in vertical dimension of occlusion.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.201-208
• /
• 2008

Statement of problem: A new implant impression technique which use abutments as impression coping, and use resin cement as a splinting material was described. Accuracy of this technique was compared with conventional closed tray and resin splinted open tray technique for a $15^{\circ}$ angled 3-implant model Material and methods: A dental stone master model with 3 linearly positioned implant analogue and a reference framework which was passively fitted to it were fabricated. The center analogue was perpendicular to the plane of model and the outer analogues had a $15^{\circ}$angulation forward or backward. 10 closed tray impressions, 10 resin splinted open tray impressions, 10 abutment-resin framework cementation impressions and 10 abutment-metal framework cementation impressions were made with additional silicone material and poured with dental stone. A light microscope with image processing was used to record the vertical gap dimension between reference framework and analogue of duplicated cast made with each 4 impression techniques. Statistical analysis used one-way ANOVA with post-hoc tests Tukey test of .05 level of significance Results: Significant difference in the vertical gap dimension was found between closed tray technique; 74.3 (${\pm}33.4$)${\mu}m$ and resin splinted open tray technique, and two other new technique. (P<.05) Abutment-metal framework cementation technique;42.5 (${\pm}11.9$)${\mu}m$ was significantly different from resin splinted open tray technique. (P<.05) Abutmentresin framework cementation technique;51.0 (${\pm}14.1$)${\mu}m$ did not differ significantly from resin splinted open tray technique;50.3 (${\pm}16.9$)${\mu}m$. (P>.05) Conclusion: Within limitations of this study, the accuracy of implant level impressions of resin splinted open tray technique was superior to that of closed tray technique. A new technique using abutment and metal framework cementation was more accurate than resin splinted open tray technique.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.11
• /
• pp.1673-1680
• /
• 2016

The purpose of this study was to examine how customer orientation (CO) reduces employee stress to customers (CSS). As emotional labor strategies [surface acting (SA) and deep acting (DA)] may mediate a role between CO and CSS, we verified multiple parallel mediator roles of SA and DA between CO and CSS. Our survey was administered to 323 school foodservice employees in Daegu and Gyeongbuk. The results show that CO increased DA but did not decrease SA, and SA had a positive effect on CSS while DA did not influence CSS. These results did not support the parallel multiple mediator model. We conducted post-hoc model modification and proposed the serial multiple mediator model as a modified model. As a result, CO increased DA, DA reduced SA, and SA showed a positive relation with CSS. This double mediating effect through DA and SA between CO and CSS was significant. Based on these results, we found that CO did not have a direct effect on SA and CSS. DA did not directly reduce CSS while CO reduced SA and CSS through DA indirectly. DA had a negative effect on CSS through SA indirectly. Finally, implications and limitations of this are discussed.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.3
• /
• pp.183-195
• /
• 2020

Purpose: The purpose of this study is to compare the flexural strength of CAD/CAM denture base resins with conventional denture base resins based on their thicknesses. Materials and Methods: For the conventional denture base resins, Lucitone 199^® (C-LC) was used. DIOnavi - Denture (P-DO) and DENTCA Denture Base II (P-DC) were taken for the 3D printing denture base resins. For the prepolymerized PMMA resins, Vipi Block Gum (M-VP) and M-IVoBase^® CAD (M-IV) were used. The final dimensions of the specimens were 65.0 mm x 12.7 mm x 1.6 mm / 2.0 mm / 2.5 mm. The 3-point bend test was implemented to measure the flexural strength and flexural modulus. Microscopic evaluation of surface of fractured specimen was conducted by using a scanning electron microscope (SEM). After testing the normality of the data, one-way ANOVA was adopted to evaluate the differences among sample groups with a significance level of P = 0.05. The Tukey HSD test was performed for post hoc analysis. Results: Under the same thicknesses, there are significant differences in flexural strength between CAD/CAM denture base resins and conventional denture base resins except for P-DO and C-LC. M-VP showed higher flexural strength than conventional denture base resins, P-DC and M-IV displayed lower flexural strength than conventional denture base resins. Flexural modulus was highest in M-VP, followed by C-LC, P-DO, P-DC, M-IV, significant differences were found between all materials. In the comparison of flexural strength according to thickness, flexural strength of 2.5 mm was significantly higher than that of 1.6 mm in C-LC. Flexural strength of 2.5 mm and 2.0 mm was significantly higher than that of 1.6 mm in P-DC and M-VP. In M-IV, as the thickness increases, significant increase in flexural strength appeared. SEM analysis illustrates different fracture surfaces of the specimens. Conclusion: The flexural strength of different CAD/CAM denture base resins used in this study varied according to the composition and properties of each material. The flexural strength of CAD/CAM denture base resins was higher than the standard suggested by ISO 20795-1:2013 at a thickness of 1.6 mm or more though the thickness decreased. However, for clinical use of dentures with lower thickness, further researches should be done regarding other properties at lower thickness of denture base resins.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.974-984
• /
• 2007

The purpose of this study was to find differences in evaluation criteria and to find differences in preferred images based on benefits segmented groups of jeans products consumers. Male and female Korean university students participated in the study. Quota sampling method was used to collect the data based on gender and a residential area of the respondents. Data from 492 questionnaires were used in the analysis. Factor analysis, Cronbach's alpha coefficient, cluster analysis, one-way ANOVA, and post-hoc test were conducted. As a result, respondents who seek multi-benefits considered aesthetic criteria(e.g., color, style, design, fit) and quality performance criteria(e.g., durability, ease of care, contractibility, flexibility) more importantly when evaluating and purchasing jeans products. Respondents who seek brand name considered extrinsic criteria(e.g., brand reputation, status symbol, country of origin, fashionability) more importantly than respondents who seek economic efciency. Respondents who seek multi-benefits such as attractiveness, fashion, individuality, and utility tend to prefer all the images: individual image, active image, sexual image, sophisticated image, and simple image when wearing jeans products. Respondents who seek fashion are likely to prefer individual image, and respondents who seek brand name more prefer both individual image and polished image. Mean while, respondents who seek economical efficiency less prefer sexual image and polished image.