• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.759-762
• /
• 2002

Automobile aeroacoustics Is a developing area of technology where experimental and theoretical tools are being continuously refined to understand, analyze and modify the noise-generating mechanisms in the vehicle flow. Main sources of ground vehicle exterior noise are the tires (tire/road interaction) and the unsteady flow field around the vehicle. In this study, the sound source localization of a rolling tire was applied to the measurement of radiated sound by using an acoustic mirror system. A possible flow pattern that develops is suggested based on detailed wind tunnel investigations with a rotating wheel in contact with a moving belt.

• International Journal of Reliability and Applications
• /
• 제5권1호
• /
• pp.1-13
• /
• 2004

It is recently well recognized that the technique for the one-sided stress wave velocity measurement in structural materials provides measurement in structural materials provides valuable information on the state of the material such as quality, uniformity, location of cracked or damaged area. This technique is especially effective to measure velocities of longitudinal and Rayleigh waves when access to only one surface of structure is possible. However, one of problems for one-sided stress wave velocity measurement is to get consistent and reliable source for the generation of elastic wave. In this study, the laser based surface elastic wave was used to provide consistent and reliable source for the generation of elastic wave into the materials. The velocities of creeping wave and Rayleigh wave in materials were measured by the one-sided technique using laser based surface elastic wave. These wave velocities were compared with bulk wave velocities such as longitudinal wave and shear wave velocities to certify accuracy of measurement. In addition, the mechanical properties such as poisson's ratio and specific modulus(E/p) were calculated with the velocities of surface elastic waves.

• 한국경영과학회지
• /
• 제37권2호
• /
• pp.73-88
• /
• 2012

Even though the final source selection of foreign weapon system purchase project in defense area is the most important phase, the standard evaluation index has not been developed. This paper provides an appropriate evaluation index using DEMATEL and ANP methods. First, the all possible evaluation criteria applied to the relevant previous literatures in domestic and overseas researches are derived and classified into groups. Second, DEMATEL method is used to determine the network structure representing the relations of cause and effect between groups and their sub-criteria. If isolated factors, not connected with other factors, are existed in the network structure, all factors except for the isolated ones are grouped as one large factor so that the independency between those ones is maintained. The weights of criteria are determined using AHP method if the criteria are independent relation and ANP method if the criteria are networked. The weights of higher and lower level criteria are then integrated and distributed as a point with respect to the decision making purpose. The developed evaluation index can be used as a standard one in various foreign weapon system purchase projects in defense area.

• 수산해양교육연구
• /
• 제21권3호
• /
• pp.400-408
• /
• 2009

The purpose of this study is to know the concept of Eco-industrial Park and How to use the thermal effluents from power plants. Thermal effluents, which use sea water for cooling, from power plants have been discharged with about $6{\sim}7^{\circ}C$ higher temperature than near sea area. Therefore, it could effect on the marine ecosystem as a external pressure factor that increase the artificial thermal load in near sea area. The applications of thermal effluents had been surveyed through the several internal and external cases for utilizing heat sources and reducing the thermal load. As the precedence research for applying, the amount of heat sources of thermal effluents was evaluated. When the thermal effluents was fully applied in heat sources and available heat, assume that use heating season by 12 hours a day of demanded available heat, it was possible to calculate total 198 Tcal of energy saving.

• 암석학회지
• /
• 제26권2호
• /
• pp.153-163
• /
• 2017

내연산응회암은 포항 북부의 화산암류에서 하나의 냉각단위로 구별되는 층서단위이다. 이 응회암은 사장석, 석영, 각섬석 등의 결정편, 부석과 샤아드의 유리질편, 데사이트, 유문암, 사암, 셰일 등의 암편으로 구성된다. 이들은 그 입도에 의하면 대부분 라필리응회암에 속하고 구성원에 의하면 파리질 응회암에 속한다. 대부분 부석과 샤아드들은 용결작용과 편평화로 인한 용결엽리를 발달시키며 화쇄류에 의한 흐름지시자를 보여준다. 우리는 이 내연산응회암에서 흐름지시자로서 부석, 암편들의 정향배열에 의한 유상선구조과 와상배열로부터 이동패턴, 암편과 부석들의 평균최대입경에 의한 등입경도로부터 측방점이를 알아냈다. 이러한 이동패턴과 측방점이에 의하면 이 응회암을 집적시킨 화쇄류의 가능공급지가 남동쪽에 있었던 것으로 해석된다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2019년도 학술발표회
• /
• pp.218-218
• /
• 2019

Jeju island has an area of $1,810km^2$ and is considered the largest island in South Korea. In Jeju Island the average annual precipitation is 1,957mm. About 54% of precipitation is estimated to be lost due to evapo-transpiration and direct runoff, and the remainder is recharged. Historically springs and puddles were the island's primary sources of water. However, after 1970 all sectors, including the urban and industrial sectors depended solely on groundwater as their water resource. As vast amount of water is being recharged the Island has many springs, especially near the coastlines. Historlcally, spring of Jeju Island formed village and make it possible to continue a life. Also it produces many values such as the spring related story, culture, tourism and ecosystems. Especially, the naturally rare phenomenon that about 900 springs appear over the whole area of Jeju Island makes it possible to call it as a natural heritage. As a result of this most springs have either been destroyed or been in the state of neglect. In some cases it has been observed that springs were preserved by nature, however majority of the cases saw springs losing their own nature as a result of abandonment. It was recorded that there were 911 springs in Jeju Island with most of them being distributed along the coast, which consequently increases their susceptibility to seawater intrusion. The objective of this study is therefore to analyze Eco-cultural and Engineering characteristics about springs in the island, highlighting its past utilization and reestablishing its potential as a source of spring.

• 한국대기환경학회지
• /
• 제22권2호
• /
• pp.179-189
• /
• 2006

Ambient gas phase mercury concentrations including elemental mercury ($Hg^0$) were measured at the Potsdam, Stockton, and Sterling sites in NY from 2000 to 2003. Also, concentrations of ambient reactive gaseous mercury (RGM; $Hg^{2+}$) were measured at the Potsdam site during one year. The contribution of RGM($4.2{\pm}6.4pg/m^3$) was about $0.2{\sim}3%$ of the total gas phase mercury concentration measured (TGM: $1.84{\pm}1.24,\;1.83{\pm}0.32,\;3.02{\pm}2.14ng/m^3$ in Potsdam. Stockton, and Sterling, respectively) at the receptor sites. Potential Source Contribution Function (PSCF), a hybrid receptor modeling incorporating backward trajectories was performed to identify source areas of TGM. Using PSCF, southern New York, North Carolina, and eastern Massachusetts were identified as important source areas in the United States, while the copper smelters and waste incinerators located in eastern Quebec and Ontario were determined to be significant sources in Canada. The Atlantic Ocean was suggested to be a possible mercury source. PSCF incorporating back-dispersion and deposition was applied for RGM , as well as PSCF based on 2-days back-trajectories. Two different approaches yielded considerably different results, primarily due to the consideration of dispersion rather than deposition. Using back-trajectory based PSCF, eastern Ohio, southern New York, and southern Pennsylvania where large coal -fired power plants area located were identified as the large sources in US. Metallurgical industry located in eastern Quebec was resolved as well. From the result of back-dispersion and deposition based PSCF, Pennsylvania, mining facilities around Lake Superior, Toronto, Boston, MA, Quebec, and coal power plants in NY were identified to be the significant source areas for Potsdam site.

• 한국전자통신학회논문지
• /
• 제16권3호
• /
• pp.407-416
• /
• 2021

능동위상배열안테나는 적절한 급전신호 가중치 선택에 따라 대국을 향해 주 빔을 조향할 수 있을 뿐만 아니라 간섭원 방향으로 패턴 널을 형성할 수 있다. 주 빔의 조향을 위한 급전신호 가중치는 방사소자의 위치를 기반으로 쉽게 산출할 수 있다. 그리고 패턴 널 형성을 위한 급전신호 가중치 또한 적절한 요구 방사패턴 설정과 WLSM(Weighted Least Squares Method)을 이용하면 산출할 수 있다. 그러나 일반적인 무선 통신망 환경에서 간섭원의 위치는 미인지 상황에 있다. 따라서 적응형 패턴 널 형성 기법이 필요하다. 본 논문에서는 요구 방사특성 설정에 따른 패턴 널 형성이 가능함을 확인하고, 이를 기반으로 관측 영역 기준 이진탐색 알고리즘을 이용하여 간섭원 적응형 패턴 널 형성 기법에 관하여 연구하였다. 제시된 기법을 기반으로 모의실험을 수행한 결과, 효율적으로 간섭 적응형 패턴 널 형성이 가능함을 확인하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.99-102
• /
• 2009

The recent LCD TV market has made efforts to produce thinner, brighter, and clearer products, and experienced the rapid light source replacement from a line source of light CCFL to a point source of light LED. In particular, LGP(Light Guiding Panel) among key parts composing BLU(Back Light Unit) has limits of the injection molding technology as well as the mold design, its processing and manufacturing technology so that it is hard to produce large LGP over 40 inch. To produce large light-guide panels over 40 inch under the injection molding process, a mold 3D model was developed in the design process before manufacturing a mold and structure unification was processed through CAE analysis. As a result, it was possible to construct the mold design process, and it is expected to manufacture the optimized mold by applying the mold design and manufacturing process of large-scale rapid injection-compression molding that will be produced in the future.

• 대한두경부종양학회지
• /
• 제26권2호
• /
• pp.187-192
• /
• 2010

Background and Objectives : LED(Light emitting diode) is recently introduced as a energy-saving light source in many area including agriculture and environment. In medical field it is known as bright and safe light source in surgical lighting including headlight. This study is aimed to test effectiveness and cost-saving of mountain-climbing headlight in comparison with xenon headlight. Materials and Methods : Internet market-available mountain-climbing headlight was compared with medical xenon headlight regarding heat generation after 30 minutes' usage, intensity of illumination and possible burn to the perioral skin. To get temperature data, 5 cases of tonsillectomy were done with the aid of LED headlight, while another 5 tonsillectomies were done using xenon headlight. Results : The temperatures of all light sources were below 45 degrees Celcius until finish of the surgery without burn or complications. No differences in operation time with both headlights. The maximal intensities of illumination were 24000 Lux for xenon, 20000 Lux for LED. Conclusion : Mountain-climbing headlight could be safe and helpful light source with low cost in simple oral surgery.