• Journal of radiological science and technology
• /
• v.34 no.1
• /
• pp.51-58
• /
• 2011

The aim of the study is to analyze the dose delivery error depending on the depth variation according to target positions and arc trajectories by comparing the simulated treatment planning with the actual dose delivery in conformal arc therapy. We simulated the conformal arc treatment planning with the three target positions (center, 2.5 cm, and 5 cm in the phantom). For the experiments, IMRT body phantom (I’mRT Phantom, Wellhofer Dosimetry, Germany) was used for treatment planning with CT (Computed Tomography, Light speed 16, GE, USA). The simulated treatment plans were established by three different target positions using treatment planning system (Eclipse, ver. 6.5, VMS, Palo Alto, USA). The radiochromic film (Gafchromic EBT2, ISP, Wayne, USA) and dose analysis software (OmniPro-IMRT, ver. 1.4, Wellhofer Dosimetry, Germany) were used for the measurement of the planned arc delivery using 6 MV photon beam from linear accelerator (CL21EX, VMS, Palo Alto, USA). Gamma index (DD: 3%, DTA: 2 mm) histogram and dose profile were evaluated for a quantitative analysis. The dose distributions surrounded by targets were also compared with each plans and measurements by conformity index (CI), and homogeneity index (HI). The area covered by 100% isodose line was compared to the whole target area. The results for the 5 cm-shifted target plan show that 23.8%, 35.6%, and 37% for multiple conformal arc therapy (MCAT), single conformal arc therapy (SCAT), and multiple static beam therapy, respectively. In the 2.5 cm-shifted target plan, it was shown that 61%, 21.5%, and 14.2%, while in case of center-located target, 70.5%, 14.1%, and 36.3% for MCAT, SCAT, and multiple static beam therapy, respectively. The values were resulted by most superior in the MCAT, except the case of the 5 cm-shifted target. In the analysis of gamma index histogram, it was resulted of 37.1, 27.3, 29.2 in the SCAT, while 9.2, 8.4, 10.3 in the MCAT, for the target positions of center, shifted 2.5 cm and 5 cm, respectively. The fail proportions of the SCAT were 2.8 to 4 times as compared to those of the MCAT. In conclusion, dose delivery error could be occurred depending on the target positions and arc trajectories. Hence, if the target were located in the biased position, the accurate dose delivery could be performed through the optimization of depth according to arc trajectory.

• The Korean Journal of Nuclear Medicine
• /
• v.31 no.3
• /
• pp.330-338
• /
• 1997

This study investigated the method to adjust acquisition time(a) and injection dose (i) to make the best basal and subtraction images in consecutive SPECT. Image quality was assumed to be mainly affected by signal to noise ratio(S/N). Basal image was subtracted from the second image consecutively acquired at the same position. We calculated S/N ratio in basal SPECT images($S_1/N_1$) and subtraction SPECT images(Ss/Ns) to find a(time) and i(dose) to maximize S/N of both images at the same time. From phantom images, we drew the relation of image counts and a(time) and i(dose) in our system using fanbeam-high-resolution collimated triple head SPECT. Noise by imaging process depended on Poisson distribution. We took maximum tolerable duration of consecutive acquisition as 30 minutes and maximum injectible dose as 1,850MBq(50 mCi)(sum of two injections) per study. Counts of second-acquired image($S_2$), counts($S_s$) and noise($N_s$) of subtraction SPECT were as follows. $C_1$ was the coefficient of measurement with our system. $$S_2=S_1{\cdot}(\frac{30-a}{a})+background{\cdot}(1-\frac{30-a}{a})+C_1{\cdot}(30-a){\cdot}{\epsilon}{\cdot}(50-i)$$ $$Ss=S_2-\{S_1{\cdot}(\frac{30-a}{a})+background{\cdot}(1-\frac{(30-a)}{a})\}$$ $$Ns={\sqrt{N_2^2+N_1^2{\cdot}\frac{(30-a)^2}{a^2}}={\sqrt{S_2+S_1{\cdot}\frac{(30-a)^2}{a^2}}$$ In case of rest/acetazolamide study, effect(${\epsilon}$) of acetazolamide to increase global brain uptake of Tc-99m-HMPAO could be 1.5 or less. Varying ${\epsilon}$ from 1 to 1.5, a(time) and i(dose) pair to maximize both $S_1/N_l$ and Ss/Ns was determined. 15 mCi/17 min and 35mCi/13min was the best a(time) and i(dose) pair for rest/acetazolamide study(when ${\epsilon}$ were 1.2) and came to be used for our clinical routine after this study. We developed simple method to maximize S/N ratios of basal and subtraction SPECT from consecutive acquisition. This method could be applied to ECD/HMPAO and brain activation studies as well as rest/acetazolamide studies.

• Journal of Fashion Business
• /
• v.6 no.1
• /
• pp.137-154
• /
• 2002

It's not easy to renew old brand of over 50 years history to the tastes of new consumer of our time. Most of national brands that has a history of some 20 years in Korea have strove for continuation and growth of brand to no avails, which can be taken as a good example of current situation. For instance, C company, one of the National brand of US which has a history of 51 years, has made its position secure as a fashion group and based itself on a sound foundation by establishing new marketing strategy and completing successful brand renewal in the process of strategic M&A with Italian company. Those successful marketing strategies are as follows. 1) they regarded both market and consumer oriented marketing activity as company's highest priority strategy and put great emphasis upon concentration on target market and reestablishment of brand image of business casual wear. 2) Setting up and operating planning team composed of merchandizer alone in Milano, they set the direction of plan on the basis of concentrated research on potential item in market according to thorough market research done by buying office in Korea, branch office in Hong Kong and buyer in US prior to blueprint planning for season. 3) Great emphasis was placed on business which focused on intensive presentation of basic key item for apparel career women who are main consumer group in the midium-low prices market in US and on supplementation of size and color. they named this line 'collectibles' and helped their customer develop their own clothes plan without worrying about the change of color and fabric by supporting same fabric and color throughout the year and enabled them to add variation easily by supplementing new trend item. 4) Company set black as a main color that lots of apparel career women find easy to care and to express their own image and presented them with pebble which belongs to navy and beige and added fashion color such as wine and brown etc as season goes by. They constructed basic line in order for their customers to coordinate purchased item with new one or to add them to present collection, and to achieve efficient sale by setting up strategy which allows this cross coordination and changing pattern occasionally. 5) Though basic jacket for 99$, short slim skirt for 49$ are products within midium-low prices range, in the material planning stage aiming at production of item that has both resonable function appealing to consumer and is fashionable, synthetic material had to be used as a main source due to price competitiveness. Despite this situation, considering comfortable sense of fit and refined drape of silhouette that has no sign of cheap material, whole collectible line was divided into two items, which contributed to reduction of cost. In case of material that is composed of triacetate and polyester in 70 to 30 ratio, was used up to 4 million yard, which allowed drastic curtailment of cost accompanied by concentration. In case of 'collectibles' line, using Korean material mainly, C company chose to have their product sewed in Southeast Asian countries where transportation is well developed and both productivity and quality verified by operating global production system which aiming at cutdown of cost through outsourcing production from the country where labor cost is low and getting finished product. Polarization between present consumers telling us that consumers with the mind of middle classes in the past no longer exists between consumers who seek after only fine article of highest quality and wise consumers who are sensible enough to judge bubble on correlation between price and quality. To cope with this change in new consumer mind, apparel makes changing their policy so as to produce item that has reasonable quality and falls within affordable price range anywhere in the world. and they're striving to get out of difficult situation by operating global marketing strategy which stresses separation of planning, production and sale and sensibility of fashion shared worldwide. The marketing strategy of C company can be exemplified as a successful one.

• Journal of Bio-Environment Control
• /
• v.15 no.2
• /
• pp.125-137
• /
• 2006

Pleurotus eryngii is one of the most promising mushrooms produced on the domestic farms. The quality as well as quantity of Eryngii is sensitively affected by micro climate factors such as temperature, relative humidity, $CO_2$ concentration, and light intensity. To safely produce high-quality Eryngii all the yew round, it is required that the environmental factors be carefully controlled by well designed structures equipped with various facilities and control systems. At the commercial mushroom cultivation houses of permanent frame type (A, B), this study was carried out to find out reasonable range of each environmental factor and yield together with economic and safe structures influencing on the optimal productivity of Eryngii. This experiment was conducted for about two-year ken Nov. 2003 to Dec. 2005 in cultivation house. Ambient temperature during the experiment period was not predominantly different from that of a normal year. The capacity of the hot water boiler and the piping systems were not enough. Because the capacity of electric heater and air circulation were not enough, air temperatures in cultivation house before improvement of system were maintained somewhat lower than setting temperature, and maximum air temperature difference between the upper and lower growth stage during a heating time period was about 5.1. But the air temperatures after system improvement were maintained within the limits range of setting temperature without happening stagnant of air. Air temperature distribution was generally distributed uniform. Relative humidity in cultivation house before , improvement was widely ranged about $44{\sim}100%$. But as the relative humidity after improvement was ranged approximately $80{\sim}100%$, it was maintained within the range of relative humidity recommended. And $CO_2$ concentration was maintained about $400{\sim}3,300mg{\cdot}L^{-1}$ range. The illuminance in cultivation house was widely distributed in accordance with position, and it was maintained lower than the recommended illuminance range $100{\sim}200lx$. The acidity of midium was some lower range than the recommend acidity range of pH $5.5{\sim}6.5$. The yield was relatively ununiform. In case of bottle capacity of 1,300cc, the mushroom of the lowest grade was less than 3%. The consumption electric energy was quite different according to the cultivation season. The electric energy consumed during heating season was much more than that of cooling season.

• Korea Journal of Hospital Management
• /
• v.11 no.1
• /
• pp.1-30
• /
• 2006

According to the available data, in these days, the number of medical accidents and disputes have significantly increased since 1990 in Korea. From this aspect, a variety of approaches and efforts to solve these problems is needed before it is too late. This study intended to identify the thoughts of patients who are directly connected with medical accidents and disputes and then to consider reasonable settlement methods of the increasing disputes. For achieving the purpose of this study, the self-administerd questionnaire was conducted with 450 out-patients who visited three university hospitals, five small and medium-sized hospitals, and ten clinics in Seoul from June 13 to 17, 2005. Incomplete questionnaires were omitted and 410 respondents(91%) were included for the analysis of this study. Each section of the survey was composed of six categories such as the recognition of malpractice, a compensation system about no-fault medical accidents, the recognition of the judgement of medical accidents in court, reasonable settlement of medical accidents, reasons of lawsuit, and the need of the medical dispute settlement organization. The major results of this study were as follows. First, more than half of the respondents, 51.9 percent, worry about malpractice. And many respondents think malpractice causes their symptoms to persist or become worse, and also some respondents think that the doctor's prescription changed too frequently. Second, as for a compensation system about no-fault medical accident, 55.7 percent of the respondents insist that a proper compensation for suffering patients or their families should be provided. And also as for the responsibility of compensation, respondents think joint compensation of both the medical institution and the government is needed foremost, followed by the medical insurance company and finally by the medical institution. The government as well as the related institutions should take responsibility for malpractice accidents for which the doctor is not responsible. Third, as for the acknowledgment of medical accident judgements by the court, 32.8 percent of respondents think that it is best to compromise with a medical institution, followed by lawsuit(26.2%), the assistance of civil organization(23.2%), and a powerful physical protest(7.6%). Fourth, as for the lawsuit of medical accidents, 62.9 percent of respondents think that patients and their families would be in a disadvantageous position in relation to medical institutions and doctors mentioning the lack of professional medical and lawful knowledge, experience and know-how as the reason. So many people have given up appeals owing to the difficulties involved in defending themselves through evidence. Fifth, about a half share of the respondents indicated that the medical institution's neglect of the responsibility of medical accidents is one of the most important reasons of lawsuit. And next respondents mentioned the lack of the medical dispute settlement organization and a general distrust of medical institutions and doctors. Sixth, a majority of respondents consented to the introduction of the need of the medical dispute settlement organization, And about a half of the respondents mentioned a readiness to accept the mediation of the organization, but the rest did not express a clear opinion. It seems that conflict among the parties concerned have existed in relation to the medical dispute settlement organization and related legislation for many years. But as this study has shown, the needs of the medical dispute settlement organization is in desperate demand. Therefore, more negotiation efforts from all interest groups should be considered for the birth of the medical dispute settlement organization and related legislation.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.39-46
• /
• 2015

A outdoor termination installed at the outdoor substation is required to connect undergroud cables and overhead transmission lines. The joint box for AC transmission system is already developed and widely used to interconnect overhead and undergroud systems. But the development of the joint box for DC transmission system was only introduced from China and Japan, but theire developemnt staus and core technologies were not fully reported. In order to implement HVDC systems connecting ovehead transmission lines and undergroud cables, a outdoor termination should be developed, but the detailed specifications and information of this device were not reported. It is estimated that the development of the joint box for DC environment has some technical obstacles including insulating materials, electric field mitigation, thermal temperature rise, and space charge accumuations. Among this, the most important one is the DC elctrical insualtion design. Therefore, in order to investigate the DC elctrical insualton design of outdoor termination, the design of AC slip-on type outdoor termination is reffered, and DC electric field analysis performed to verify the possiblity of application of AC joint box into DC joint box. Especially for DC electric field analysis, temperature rise of insualting materials of a joint box was considered, because the conductivity of materials could be changed due to temperature rise. Furthermore, DC electric field analysis considering transinet state, and polarity reversal state were also investigated to verify which state is the most severe condition for the DC joint box. From the simualtion resulsts, it was shown that the value and the position of maximum electric field was obtained comparing AC state, DC state without temperaure rise, and DC state with temperaure rise. And it was confimred that severe DC electric field was observed considing temperaure rise. Finally, in order to reduce DC eletric field intensifation, different configuration of the joint box was applied and it was not possible to obtain satisfactory results. It means that the slight change of configuration of AC joint box was not the suitable soluton for DC joint box. It is essential to establish novel DC insulaton design skills and method for DC joint box to commercialze this product in the near future.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.181-186
• /
• 2003

The satellite navigation system is widely used for identifying a user's position regardless of weather or geographic conditions and also make effect on new technology of marine LBS(Location Based Service), which has the technology of geographic information such as the ENC. Generally, there are conceivable systems of marine LBS such as ECDIS, or ECS that use the ENC itself with powerful processor in installed type on ships bridge. Since the ENC is relatively heavy structure with dummy format for data transfer between different systems, we should reduce the ENC to small and compact size in order to use it in mobile platform. In this paper, we assumed that the mobile system like PDA, or Webpad can be used for small capability of mobile platform. However, the ENC should be updated periodically by update profile data produced by HO. If we would reduce the ENC without a consideration of update, we could not get newly updated data furthermore. As summary, we studied considerations for ENC reduction with update capability. It will make the ENC be useful in many mobile platforms for various applications.

• Korean Security Journal
• /
• no.61
• /
• pp.285-305
• /
• 2019

In the bill of [Act on Certified Detective and Certified Detective Business] (hereinafter referred to as the Certified Detective Act) proposed and represented by the member of National Assembly, Lee Wan-Yong in 2017, the legislative point of view showed that various incidents and accidents, including new crimes, are frequently increasing as society develops and becomes more complex, however, it is not possible to solve all the incidents and accidents with the investigation force of the state alone due to manpower and budget, and therefore, a certified detective or private investigator are required. According to the decision of the Constitutional Court in June 2018, Article 40 (4) of the Act on the Use and Protection of Credit Information is concerned with 'finding the location and contact information of a specific person or investigating privacy other than commerce relations such as financial transactions' are prohibited. It is for the purpose of preventing illegal acts in the process of investigation such as the location, contact information, and the privacy of a specific person and protecting the privacy and tranquility of personal privacy from misuse and abuse of the personal information etc. Such 'privacy investigation business' currently operates in the form of self-employment business, which becomes a social issue as some companies illegally collect and provide such privacy information by using illegal cameras or vehicle location trackers and also comes to be the objects of clampdown of the investigative agency. Considering this reality, because it is difficult to find a resolution to materialize the legislative purpose of the Act on the use and protection of credit information other than prohibiting 'investigation business including privacy etc' and it is possible to run a similar type of business as a detective business in the scope that the laws of credit research business, security service business, the position of the Constitutional Court is that 'the ban on the investigations of privacy etc' does not infringe the claimant's freedom to choose a job. In addition to this decision, the precedent positions of the Constitutional Court have been that, in principle, the legislative regulation of a particular occupation was a matter of legislative policy determined by the legislator's political, economic and social considerations, unless otherwise there were any special circumstances, and. the Constitutional Court also widely recognized the legislative formation rights of legislators in the qualifications system related to the freedom of a job. In this regard, this study examines the problems and improvement plans of the certified detective system, focusing on the certified detective bill recently under discussion, and tries to establish a legal basis for the certified detective and certified detective business, in order to cultivate and institutionalize the certified detective business, and to suggest methodologies to seek for the development of the businesses and protect the rights of the people.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.1
• /
• pp.34-38
• /
• 2017

Purpose During PET/CT examinations, the movements of internal organs caused by respiration are captured in images during multiple breathing cycles, resulting in the increases in tumor size and effects on SUV. Respiratory synchronized systems were used to evaluate tumor sizes and SUV changes. Materials and Methods Biograph mCT 64 was used for the equipment, and RPM and Anzai systems were used for the respiratory synchronized systems. We used point source and micro-phantom for an experimentation. We were performed on 12 patients who had solid tumors discovered at the base of the lung or at the top of the liver from August through September 2016. The PET images of the exhalation-to-breathing state and the CT images of the post-exhalation suspension state were gained to evaluate changes in radioactivity concentration (KBq/mL), SUVmax, cylinder diameter (mm), and tumor diameter (cm) under the conventional Static, RPM, and Anzai methods. Results The result of measuring the radioactivity concentration of the point source was RPM 94% and Anzai 91% against Static, respectively. In the two cylinders of different radioactivity in the micro-phantom, the SUVmax increased to RPM 61% and 78%, and Anzai 58% and 77% against Static, whereas the cylinder diameters decreased by RPM -26% and -28%, and Anzai -28% and -26%, each respectively. Among the patients, the SUVmax increased from a minimum of RPM 8.2% to a maximum of 94.4% against Static, and from a minimum of Anzai 7.6% to a maximum of 68.3%, respectively. As for the tumor diameters, a minimum of RPM -7.6% to a maximum of -28.9% were achieved, while the Anzai fell by a minimum of -9.6% to a maximum of -27.7%, respectively. There was no significant difference discovered in the phantom study between the RPM and Anzai, yet there was a meaningful difference in the patients' tumors (P<0.05). Conclusion The respiratory synchronized systems of RPM and Anzai yielded no significant difference in the phantom study in which the respiration was executed at regular intervals. However, it was discovered that the patients had a meaningful difference for the irregular respiratory cycle and inter-system differences. Still, the respiratory synchronized systems would be useful for the accurate diagnosis and SUV measurement as the tumor decreased in size against the existing Static and the SUV increased.

• Journal of Legislation Research
• /
• no.44
• /
• pp.571-610
• /
• 2013

The current patent system is more often used for defensive purposes to exclude others' use or as a means to hold unfair strong positions in negotiations rather than for the original purpose as the dissemination and active use of useful technology. An injunction together with a damage is an important remedy for patent infringements. However, unlike a claim for damages, injunctions do not require the subjective requirement of intent and negligence or the occurrence of loss. If the validity of the patent and the fact of infringement are confirmed, automatically injunctions are issued without consideration of other circumstances. So a patent holder would exclude others' use and have a powerful position in negotiations because of injunctions for patent infringements. Therefore, those injunctions for patent infringements should be flexibly restricted according to cases under the premise to ensure fair compensation for the patent owner, rather than absolutely admitting injunctions for patent infringements like now. If then, it would serve the use of a useful technology and industrial development as the purpose of the patent system. First of all, judgments for preliminary injunctions should be strict and by deliberate decision on the merits permanent injunctions should be determined. In addition, it is needed that court's discretion possible to considerate 'the need for an injunction'. When the courts judge 'the need for an injunction', 'whether a patent holder has implemented a patent invention, the possibility of monetary compensation and the ability of the infringer for damages, a patent holder's intent to license and whether an injunction has been used as a weapon of negotiation, the proportion of patent technology in the entire products, the characteristics of patent technology and the possibility of patent invalidity, the competitive relationship for market share, the public interests and gains and losses between the parties and so on' should be considered. After these judgements, if 'the need for an injunction' is not approved, a patent owner would be protected by post-monetary compensation. However, because damages are related to illegal conducts in the past, in the case that an injunction is restrained, measures to ensure the legal implementation in the future are needed. It is primarily desirable that reasonable royalty is estimated throughout private negotiations between parties, but if agreement between the parties does not occur, patent owner should be able to claim the royalty for future.