• 한국정밀공학회지
• /
• 제14권9호
• /
• pp.68-79
• /
• 1997

A six DOF fine manipulator based on magnetic levitation is developed. Since most of magnetic levitation system are inherently unstable, a proposed magnetically levitated fine manipulator is implemented by use of an antagonistic structure to increase stability. From mathematical modeling and experiment, the equations of motion are derived. In addition, a six DOF sensing system is implemented by use of three 2-axis PSD sensors. A model reference-$H_{\infty}$ controller is applied to the system for the position control, In application of the fine manipulator, a wafer probing system is proposed to identify nonfunctional circuts. The probing system requires compliance to avoid destruction of DUT(device under test). A feedfor- ward-PD controllers are presented by the terms of the position accuracy, the settling time and the force accuracy.y.

• 대한기계학회논문집A
• /
• 제21권12호
• /
• pp.2081-2089
• /
• 1997

Accurate positioning of the throttle valve of a gasoline engine is required to implement various systems such as traction control system(TCS), cruise control system and drive-by-wire system. In this research, position control system has been developed for the throttle actuator system that uses one throttle actuation for small volume and DC servo motor for fast response. In order to drive the DC motor, PWM signal generator and PWM amplifier were built and interfaced to the motor and controller. Also, time delay control(TDC) law has been used as a basic control algorithm. A method of varying the reference model of the TDC according to the size of change in target throttle angle is proposed here. The simulation and experimental results show that both overshoot prevention and fast response are achieved by the TDC technique with this variable reference model.

• 한국항해항만학회지
• /
• 제31권10호
• /
• pp.859-864
• /
• 2007

미래 항만내 항법에서 요구하는 sub-meter 수준의 위치정확도를 만족하기 위해 DGPS와 같은 위성전파항법 보강시스템의 활용이 필요하다. 일반적으로 해양에서 사용하는 DGPS 기준국용 수신기는 RSIM Ver. 1.1에서 제시한 DGPS 기준국용 수신기 성능 요구사항을 만족해야 하고, 이에 대한 성능검증이 필요하다. 본 논문에서는 해양에서 사용하는 DGPS 기준국용 수신기의 성능검증방법을 제안하였다. 그리고 제안한 DGPS 기준국용 수신기 성능검증 방법으로 실시한 상용 DGPS 기준국용 수신기의 성능검증 실험을 통하여 제안한 성능검증 방법을 검증하였다.

• 한국정밀공학회지
• /
• 제16권11호
• /
• pp.197-203
• /
• 1999

Increasing demands on precision machining have necessitated the tool to move not only position error as small as possible, but also with smoothly varying feedrates. Because of the lack of accurate and efficient algorithms for generation of 3-dimensional lines and circles, a full accomlishment for available machine tool resolution is generally unavailable. In this paper, a reference-pulse type 3-axis PC_NC milling system is developed for the precision machining of complex shapes in 3-dimensional space. Three AC servomotors are used as the actuator instead of the hand wheel to operate a 3-axis milling machine under the same mechanical structure. A PC is used to handle the control signal calculation for various types of motion command. To achieve the synchronous 3-axis motion, a real-time reference-pulse 3-dimensional linear and circular interpolator based on the intersection criteria is developed in software. The performance test via computer simulation and actual machining have shown that the PC-NC milling system is useful for the machining of arbitrary lines and circles in 3-dimensional space.

• 한국항해항만학회지
• /
• 제39권3호
• /
• pp.149-156
• /
• 2015

Dynamic Positioning System(DPS)은 동력, DP control 장치, DP 컴퓨터, 위치참조시스템(PRS), 센서, thruster 시스템 및 DP 운용자(DPO) 7가지로 구성되어 있다. DP 선박은 이들 구성요소들에 문제가 발생하면 그 기능을 상실할 수 있는데 이러한 DP 선박의 위치손실사고(Loss of Position, LOP)는 선주가 자발적으로 매년 IMCA에 보고하고 있다. 본 연구에서는 2001~2010년까지 10년 동안 IMCA 보고된 DP 선박 관련사고 612건에 대한 분석을 바탕으로 DPS의 7가지 구성요소와 관련된 사고 원인을 파악하고 이들 중 높은 비율을 차지하는 요인의 정성적, 정량적 분석을 통한 DP 선박의 안전운항 방안을 모색하고자 한다. 10년 평균 가장 높은 비율을 차지한 DPS 사고원인 요소는 PRS였다. 이를 전문가들의 브레인스토밍을 통해 작성된 flowchart를 바탕으로 베이지안 네트워크 분석을 시행한 결과 PRS 각 요소별 조건부 확률을 확인할 수 있었다. DP 선박의 drive off를 발생시키는데 주요한 영향을 미치는 것은 DGPS, microwave radar 및 HPR 이었고 DGPS에 주요한 영향을 미치는 에러 요인은 signal blocked, electric components failure, relative mode error 및 signal weak or fail이라는 것도 확인할 수 있었다.

• 한국소음진동공학회논문집
• /
• 제22권7호
• /
• pp.650-658
• /
• 2012

This paper proposes a high performance position controller for a driving system using a time optimal controller which has been widely used to control driving systems to achieve desired reference position or velocity in a minimum response time. The main purpose of this research lies in an improvement of transient response performance rather than that of steady-state response in comparison with other control strategies. In order to refine the scheme of time optimal control, Lyapunov stability proofs are incorporated in a controller of standard second order system model. This scheme is applied to the control of a driving system. In view of the simulation and experiment results, the standard second order system model exhibits better minimum-time control performance and robustness than double integral system model does.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1995년도 춘계학술대회 논문집
• /
• pp.40-62
• /
• 1995

A micro positioning system using piezoelectric actuators have very wide application region such as ultra-precision machine tool optical device measurement system. In order to keep a high precision displacement resolution it to useful to take a position sensor and feedback of the error. From the practical point of view high-resolution displacement sensor systems are very expensive and it is difficult to make such a sensitive sensor work properly in a poor operational environment of industry. In this study a piezo-electric micro-depth control system which does not require position sensor but piezoelectric voltage feedback has been developed. It is driven by hysteresis-considering reference input voltage calculated in advance and actuator/sensor characteristics of piezoelectric materials. From the result of experiments a fast and stable response of micro-depth control system has been achieved and an efficient technique to control the piezoelectric actuator suggested.

• 한국산업정보학회논문지
• /
• 제18권4호
• /
• pp.37-41
• /
• 2013

본 논문에서는 AHRS(Attitude and Heading Reference System) 센서를 이용하여 스튜어트 플랫폼으로 구성된 평면의 평형상태를 유지시키는 시스템을 소개한다. 움직이는 선박이나 차량에서 구조물이 지면의 기울기에 상관없이 항상 평형상태를 유지하도록 하기 위하여 자세 제어를 하는 역학적 기기로 스튜어트 플랫폼을 사용하였다. 그리고 현재의 기울어진 각도를 알아내고 보정하기 위하여 AHRS 센서를 이용하였다. AHRS센서와 스튜어트 플랫폼 제어 간의 피드백 시스템을 구성하여 자동으로 스튜어트 플랫폼의 위쪽 판넬이 평형을 이루는 시스템을 제작하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.97-100
• /
• 1997

A new control method for the robust position control of a brushless DC(BLDC) motor using the asymptotically stable adaptive load torque observer is presented. A precision position control is obtained for the BLDC motor system approximately linearized using the field-orientation method. And the application of the load torque observer is published in [1] using fixed gain. However, the flux linkage is not exactly known for a load torque observer. Therefore, a model reference adaptive observer is considered to overcome the problem of the unknown parameter in this paper. And stability analysis is carried out using Liapunov stability theorem. As a result, asymptotically stable observer gain can be obtained without affecting the overall system response. The load disturbance detected by the asymptotically stable adaptive observer is compensated by feedforwarding the equivalent current having the fast response.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.53-55
• /
• 1988

The application of Sliding Mode Control for inproving the dynamic response of a Multi-Phase-Bipolar (MPB) Brushless DC motor based position Brushless DC motor system is presented. Sliding Mode Control gives fast dynamic response with no overshoot and zero steady state error. It has the important feature of bins highly robust. A design procedure is outlined for the Sliding Mode Controller for a MPB Brushless DC motor. Digital computer simulation of the overall position control system is carried out using a time domain model in the d-q reference frame.