• Journal of Power Electronics
• /
• v.6 no.4
• /
• pp.347-355
• /
• 2006

A new control method for precision robust position control of a permanent magnet synchronous motor (PMSM) is presented. In direct drive motor systems, a load torque disturbance directly affects the motor shaft. The application of the load torque observer is published in using a fixed gain to solve this problem. However, the motor flux linkage cannot be determined precisely for a load torque observer. Therefore, an asymptotically stable adaptive observer base on a deadbeat observer is considered to overcome the problems of unknown parameters, torque disturbance and a small chattering effect. To find the critical parameters the system stability analysis is carried out using the Liapunov stability theorem.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.12
• /
• pp.1241-1248
• /
• 2004

A controller of wheeled mobile robot(WMR) based on Lyapunov theory is designed and a Fuzzy-Neural Network algorithm is applied to this system to adjust controller gain. In conventional controller of WMR that adopts fixed controller gain, controller can not pursuit trajectory perfectly when initial condition of system is changed. Moreover, acquisition of optimal value of controller gain due to variation of initial condition is not easy because it can be get through lots of try and error process. To solve such problem, a Fuzzy-Neural Network algorithm is proposed. The Fuzzy logic adjusts gains to act up to position error and position error rate. And, the Neural Network algorithm optimizes gains according to initial position and initial direction. Computer simulation shows that the proposed Fuzzy-Neural Network controller is effective.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.1
• /
• pp.79-87
• /
• 1999

For its simplicity and cost effectiveness in implementation, the Inverted DGPS is well suited for some specific applications like automatic vehicle location systems, where the monitoring station needs accurate position of the vehicles in the street. In the Inverted DGPS, the user sends its GPS position and associated satellite informations to the reference station, and the corrections are made at the reference station to get differentially corrected user position. A fundamental requirement in IDGPS is that the user and the reference station must use the same satellites when the corrections are made. But in practice, it is not often satisfied. Inverted DGPS is also suffered from performance degradation as the baseline become large like DGPS. IDGPS system using multi-reference station can resolve this problem. In this paper a simple multi-reference IDGPS algorithm is proposed and some experiments and analysis are peformed. Experiment results show that IDGPS can achieve the positioning performance as accurate as the DGPS can provide.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1496-1499
• /
• 2004

In this paper, we deal with a novel path planning algorithm to find collision-free path for a moving robot to find an appropriate path from initial position to goal position. The robot should make progress by avoiding obstacles located at unknown position. Such problem is called the path planning. We propose so called the subgoal generation algorithm to find an effective collision-free path. The generation and selection of the subgoal are the key point of this algorithm. Several subgoals, if necessary, are generated by analyzing the map information. The subgoal is the candidate for the final path to be pass through. Then selection algorithm is executed to choose appropriate subgoal to construct a correct path. Deep and through explanations are given for the proposed algorithm. Simulation example is given to show the effectiveness of the proposed algorithm.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.507-509
• /
• 1996

This paper is concerned with a position, control of induction motors using binary control. Due to the robustness and fast response, variable structure control is widely used for motor control field. However, the chattering phenomenon which is a drawback of VSC deteriorates the control performance and damages system components. In this paper, using binary control which has the characteristics of chattering alleviation and robust property solves this problem. The principle of binary control with inertial external loop and the design method of binary position controller are described. Also the control performance of proposed controller is confirmed by experiments.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.97-100
• /
• 1997

A new control method for the robust position control of a brushless DC(BLDC) motor using the asymptotically stable adaptive load torque observer is presented. A precision position control is obtained for the BLDC motor system approximately linearized using the field-orientation method. And the application of the load torque observer is published in [1] using fixed gain. However, the flux linkage is not exactly known for a load torque observer. Therefore, a model reference adaptive observer is considered to overcome the problem of the unknown parameter in this paper. And stability analysis is carried out using Liapunov stability theorem. As a result, asymptotically stable observer gain can be obtained without affecting the overall system response. The load disturbance detected by the asymptotically stable adaptive observer is compensated by feedforwarding the equivalent current having the fast response.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.513-518
• /
• 1993

In this paper, we consider the handling f a flexible object using dual-arm manipulators. We choose both the side arms as rigid, and the objects to be manipulated as flexible. Our purpose is to realize position control for the flexible object while suppressing its vibration. In particular, the problem taken up here is the stability of the control system while manipulating the object. We propose that the traditional approach to investigate the robot system be expanded to include the object's characteristics (thus transferring the stability of the robot system into the full assembly system). We define a handling characteristic while manipulating the object. Finally, the relationship between the handling characteristic and the positional constraint condition in the hold position of the arms is studied while considering the stability of the control system.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.4
• /
• pp.142-147
• /
• 2000

An overhead crane system which transports an object by girder motion, trolley motion, and hoist motion becomes a nonlinear system because the length of a rope changes. To develope the position control algorithm for the nonlinear crane systems, we apply a nonlinear optimal control method which uses forward and backward difference methods and obtain optimal inputs. This method is suitable for the overhead crane system which is characterized by the differential equation of higher degree and swing motion. From the results of computer simulation, it is founded that the position of the overhead crane system is controlled, and the swing of the object is suppressed.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1992.06a
• /
• pp.87-90
• /
• 1992

Detecting acoustic emission (AE) provides an appropriate method to diagonize on-line transformers, since acoustic signal is not influenced by strong electric field. Then AE versus AE signal processing method is investigated. But this processing is difficult that decision of starting point of AE wave with acoustic noise. This problem is sloved by correlation which calculate time interval between two signals eactly. This paper presents a technique locating the eact position of the partial discharge (PD) in a power transformer by the correlation of the AE signals from two ultrasonic sensors. And PD position is displayed on monitor. Laboratory tests confirmed that the proposed method can be used for locating the PD in power transformer.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.9
• /
• pp.1692-1698
• /
• 2010

In this paper we use wireless sensor network and ultrasonic sensors to estimate local position of mobile robots, and to navigate it. Ultra sonic sensor is simple and accurate so it is good to use in local estimation and navigation of mobile robots. But to obtain accurate distance of two sensors they need to face each others as possible as they can. To solve this problem we rotate ultra sonic sensor which is attached to robot in 360 degrees and obtain accurate distance. We can estimate precise position of mobile robot by triangulation using obtained distance information. A mobile robot navigates using embedded encoder and compensates its coordinates by ultrasonic sensors. Results of Experiments show proposed method obtains accurate distance between sensors and coordinates of position of robot. And mobile robots can navigate designated path well.