• Journal of the Korean Institute of Navigation
• /
• v.25 no.2
• /
• pp.195-205
• /
• 2001

It has been over seven years since Maritime Code of the Peoples Republic of China (hereinafter called the Code) came into force on July 1st 1993. During this period it has played a very important roll in governing Chinas ocean shipping. However, owing to the defects of the Code, many problems have arisen in the performance of the Code, among which is the problem related to delay in delivery. Therefore, it is necessary and inevitable to revise the Code. This study is limited to a rough study on the regulations related to delay in delivery in the Code, such as the definition of delay in delivery, the carriers responsibility for delay in delivery, the carriers exemption from responsibility for delay in delivery, the limitation of responsibility, the procedures of claims for delay in delivery and the difference of the Code from the Korea Commercial Law, the Hague Rules, the Hague-Visby Rules and the Hamburg Rules. Furthermore, some defects in the Code are pointed out and suggestions are provided for the revision of the Code.

• Journal of the Korea Convergence Society
• /
• v.8 no.10
• /
• pp.19-28
• /
• 2017

Recently the cargo transportation is increasing according to lager containerships in the container terminal. Thus, the various ways(such as efficient vehicle scheduling and minimizing delay time) are applied to increase productivity to handle the increasing cargo transportation in the container terminal. In this paper, the optimized model(Solvers) is applied to improve the existing heuristic method as a way of increasing productivity. The experimental design is that the result of two objective functions(minimizing travel and delay time of the empty vehicle) is compared to the result of the existing heuristic method by six sample problems. As a result of the two objective function experiments, the optimized model draws 5.3% more improved performance than the heuristic method in four of six problem samples.

• KIEAE Journal
• /
• v.16 no.3
• /
• pp.25-34
• /
• 2016

Purpose: The temperature in Seoul has risen 3 times more than the average global temperature increase for the past 100 years. Today, summer starts 15 days earlier than the early 20th century and is 32 days longer. This tendency causes rapid increase of cooling energy demand. Following this effect, seawater heat resources are to be used as an countermeasure for global warming. Incheon Port near the Western Sea has the lowest water temperature in the winter in South Korea in which it is suitable to use seawater cold heat resources. Method: The cold heat resource is gained from seawater when the water temperature is the lowest in the winter time and saved in a seasonal thermal storage. This can be used as cold heat resource in the summer time. A heat exchanger is essential to gain seawater cold energy. Due to this necessity, sea water heat resource heat exchangers are modeled by heat transfer equations and the fluid characteristics are analyzed. Also, a CFD (computational fluid dynamics) program is used to conduct simulation on the fluid characteristics of heat exchangers. The analyzed data of deducted from this process are comprehensively analyzed and discussed. Result: Regarding the performance of the heat exchanger, the heat exchanger was operated following the prediction within the range of heat transfer rate of minimum 3.3KW to maximum 33.6KW per device. In the temperature change analysis of the heat exchanger, fluid analysis by heat transfer equations almost corresponded to the temperature change by CFD simulation. Therefore, it is considered that the results of this study can be used as design data of heat exchangers.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.128-134
• /
• 2016

IoT devices including smart devices are connected with internet, thus they have security threats everytime. Particularly, IoT devices are composed of low performance MCU and small-capacity memory because they are miniaturized, so they are likely to be exposed to various security threats like DoS attacks. In addition, in case of IoT devices installed for a remote place, it's not easy for users to control continuously them and to install immediately security patch for them. For most of IoT devices connected directly with internet under user's intention, devices exposed to outside by setting IoT gateway, and devices exposed to outside by the DMZ function or Port Forwarding function of router, specific protocol for IoT services was used and the devices show a response when services about related protocol are required from outside. From internet search engine for IoT devices, IP addresses are inspected on the basis of protocol mainly used for IoT devices and then IP addresses showing a response are maintained as database, so that users can utilize related information. Specially, IoT devices using HTTP and HTTPS protocol, which are used at usual web server, are easily searched at usual search engines like Google as well as search engine for the sole IoT devices. Ill-intentioned attackers get the IP addresses of vulnerable devices from search engine and try to attack the devices. The purpose of this study is to find the problems arisen when HTTP, HTTPS, CoAP, SOAP, and RestFUL protocols used for IoT devices are detected by search engine and are maintained as database, and to seek the solution for the problems. In particular, when the user ID and password of IoT devices set by manufacturing factory are still same or the already known vulnerabilities of IoT devices are not patched, the dangerousness of the IoT devices and its related solution were found in this study.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.5
• /
• pp.212-221
• /
• 2010

The bubbles could be created from multiple source in the surface of ocean. The bubbles which are created like this affect to the intensity and the sound speed of acoustic wave which are used from the ocean. From the research, it observed Reverberation from the sea surface, using Vbeam transmission and reception equipment that was a cross-shaped Array, from 2008 July 2nd to July 3rd at 4Km from the East Sea Mookho port. It is difficult to analyze data because the received signal has ambient noise and occurrence ISI(Inter Symbol Interference) for multipath. This paper remove that ambient noise and ISI using the directions of arrival beamforming and the filter and sum beamforming. After beamforming, a following DFE(Decision Feedback Equalizer) removes the remaining multipath components. Experimental results show that the proposed technique reduce the errors caused by ISI.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.996-1003
• /
• 2003

There are critical drawbacks in fabricating MMIC transversal filters because the length of the conventional transversal filter structure is much longer than the width. In order to solve this structural problem, a transversal filter using multiple-coupled-line directional couplers which can achieve tight coupling is proposed. The length of the proposed transversal filter can be made short using multiple-coupled-line couplers so that the structure of the proposed filter is applicable to MMIC technology. Because of the dielectric and conductor losses, the excited signal at the input port becomes smaller when it progresses through each directional coupler. Therefore, the strength of the coupled signals at the latter directional couplers becomes smaller than the designed one and this, in turn, gives rise to performance aggravation. A modified coupling coefficient formula to prevent frequency characteristic degradation is introduced. The proposed filter structure and the design method are verified by the calculated result and 3D full-wave analysis.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.5
• /
• pp.447-452
• /
• 2016

The use of gas as fuel, particularly liquefied natural gas (LNG), has increased in recent years owing to its lower sulfur and particulate emissions compared to fuel oil or marine diesel oil. LNG is a low temperature, volatile fuel with very low flash point. The major challenges of using LNG are related to fuel bunkering, storing, and handling during ship operation. The main components of an LNG fuel system are the bunkering equipment, fuel tanks, vaporizers/heaters, pressure build-up units (PBUs), and gas controlling units. Low-pressure dual-fuel (DF) engines are predominant in small LNG-powered vessels and have been operating in many small- and medium-sized ferries or LNG-fueled generators.(Tamura, K., 2010; Esoy, V., 2011[1][2]) Small ships sailing at coast or offshore rarely have continuous operation at constant engine load in contrast to large ships sailing in the ocean. This is because ship operators need to change the engine load frequently due to various obstacles and narrow channels. Therefore, controlling the overall system performance of a gas supply system during transient operations and decision of bunkering time under a very poor infrastructure condition is crucial. In this study, we analyzed the fuel consumption, the system stability, and the dynamic characteristics in supplying fuel gas for operating conditions with frequent engine load changes using a commercial analysis program. For the model ship, we selected the 'Econuri', Asia's first LNG-powered vessel, which is now in operation at Incheon Port of South Korea.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.1
• /
• pp.52-61
• /
• 2001

It is necessary to obtain the well-documented local flow measurement data for the validation of CFD prediction of hydrodynamic performance. In the present paper the local flow fields around the stern region of a VLCC model with drift angles of $0^{\circ},\;5^{\circ},\;and\;10^{\circ}$ are measured. Mean velocity components are documented at St. 2 and A.P. of both port and starboard side of KVLCC in KRlSO towing tank. Flow information associated with the formation of four discrete vortices in the stern region is explored. The present experimental data can provide a good test case to validate the accuracy of numerical modeling for stern flow and maneuverability prediction of modern tanker hull forms.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.12
• /
• pp.167-174
• /
• 2011

This paper described the estimation methods of CO2 emission of vehicles. The important of energy and environment has emerged in the world, and the field of vehicle's development as well. CO2 was particularly the object of emission-regulation that caused of global warming. There are performance comparison methods by driving mileage, International Panel on Climate Change (IPCC) and chemical equation for the combustion of Octane. We took the measurement by getting data through OBD-II port from vehicle covered 5 km on road. We got the diagnosis information, specific mileage and fuel consumption in this experiment. We are able to expect similar CO2 emission by the methods in the normal speed driving. Also, we can make more realistic approach of CO2 emission by the method of estimation by IPCC and chemical equation for the combustion of Octane in rapid acceleration driving.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.2
• /
• pp.19-27
• /
• 2016

Maritime transport is now regarded as one of the main contributors to global climate change by virtue of its $CO_2$ emissions. Meanwhile, slow steaming, i.e., slower ship speed, has become a common practice in the maritime industry so as to lower $CO_2$ emissions and reduce bunker fuel consumption. The practice raised various operational decision issues in terms of shipping companies: how much ship speed is, how much to bunker the fuel, and at which port to bunker. In this context, this study addresses an operation problem in a shipping companies, which is the problem of determining the ship speed, bunkering ports, and bunkering amount at the ports over a given ship route to minimize the bunker fuel and ship time costs as well as the carbon tax which is a regulatory measure aiming at reducing $CO_2$ emissions. The ship time cost is included in the problem because slow steaming increases transit times, which implies increased in-transit inventory costs in terms of shippers. We formulate the problem as a nonlinear lot-sizing model and suggest a Lagrangian heuristic to solve the problem. The performance of the heuristic algorithm is evaluated using the data obtained from reliable sources. Although the problem is an operational problem, the heuristic algorithm is used to address various strategic issues facing shipping companies, including the effects of bunker prices, carbon taxes, and ship time costs on the ship speed, bunkering amount and number of bunkering ports. For this, we conduct sensitivity analyses of these factors and finally discuss study findings.