• 제목/요약/키워드: Porous body

검색결과 208건 처리시간 0.031초

Corrosion Behavior of Ti-6Al-4V Alloy after Plasma Electrolytic Oxidation in Solutions Containing Ca, P and Zn

  • Hwang, In-Jo;Choe, Han-Cheol
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2016년도 추계학술대회 논문집
    • /
    • pp.120-120
    • /
    • 2016
  • Ti-6Al-4V alloy have been used for dental implant because of its excellent biocompatibility, corrosion resistance, and mechanical properties. However, the integration of such implant in bone was not in good condition to achieve improved osseointergraiton. For solving this problem, calcium phosphate (CaP) has been applied as coating materials on Ti alloy implants for hard tissue applications because its chemical similarity to the inorganic component of human bone, capability of conducting bone formation and strong affinity to the surrounding bone tissue. Various metallic elements, such as strontium (Sr), magnesium (Mg), zinc (Zn), sodium (Na), silicon (Si), silver (Ag), and yttrium (Y) are known to play an important role in the bone formation and also affect bone mineral characteristics, such as crystallinity, degradation behavior, and mechanical properties. Especially, Zn is essential for the growth of the human and Zn coating has a major impact on the improvement of corrosion resistance. Plasma electrolytic oxidation (PEO) is a promising technology to produce porous and firmly adherent inorganic Zn containing $TiO_2(Zn-TiO_2)$coatings on Ti surface, and the a mount of Zn introduced in to the coatings can be optimized by altering the electrolyte composition. In this study, corrosion behavior of Ti-6Al-4V alloy after plasma electrolytic oxidation in solutions containing Ca, P and Zn were studied by scanning electron microscopy (SEM), AC impedance, and potentiodynamic polarization test. A series of $Zn-TiO_2$ coatings are produced on Ti dental implant using PEO, with the substitution degree, respectively, at 0, 5, 10 and 20%. The potentiodynamic polarization and AC impedance tests for corrosion behaviors were carried out in 0.9% NaCl solution at similar body temperature using a potentiostat with a scan rate of 1.67mV/s and potential range from -1500mV to +2000mV. Also, AC impedance was performed at frequencies ranging from 10MHz to 100kHz for corrosion resistance.

  • PDF

Injectable hydrogels delivering therapeutic agents for disease treatment and tissue engineering

  • Lee, Jin Hyun
    • 생체재료학회지
    • /
    • 제22권4호
    • /
    • pp.235-248
    • /
    • 2018
  • Background: Injectable hydrogels have been extensively researched for the use as scaffolds or as carriers of therapeutic agents such as drugs, cells, proteins, and bioactive molecules in the treatment of diseases and cancers and the repair and regeneration of tissues. It is because they have the injectability with minimal invasiveness and usability for irregularly shaped sites, in addition to typical advantages of conventional hydrogels such as biocompatibility, permeability to oxygen and nutrient, properties similar to the characteristics of the native extracellular matrix, and porous structure allowing therapeutic agents to be loaded. Main body: In this article, recent studies of injectable hydrogel systems applicable for therapeutic agent delivery, disease/cancer therapy, and tissue engineering have reviewed in terms of the various factors physically and chemically contributing to sol-gel transition via which gels have been formed. The various factors are as follows: several different non-covalent interactions resulting in physical crosslinking (the electrostatic interactions (e.g., the ionic and hydrogen bonds), hydrophobic interactions, ${\pi}$-interactions, and van der Waals forces), in-situ chemical reactions inducing chemical crosslinking (the Diels Alder click reactions, Michael reactions, Schiff base reactions, or enzyme-or photo-mediated reactions), and external stimuli (temperatures, pHs, lights, electric/magnetic fields, ultrasounds, or biomolecular species (e.g., enzyme)). Finally, their applications with accompanying therapeutic agents and notable properties used were reviewed as well. Conclusion: Injectable hydrogels, of which network morphology and properties could be tuned, have shown to control the load and release of therapeutic agents, consequently producing significant therapeutic efficacy. Accordingly, they are believed to be successful and promising biomaterials as scaffolds and carriers of therapeutic agents for disease and cancer therapy and tissue engineering.

양극산화에 의한 티타늄 산화막의 표면 특성 및 생체 활성에 관한 연구 (SURFACE CHARACTERISTICS AND BIOACTIVITY OF ANODICALLY OXIDIZED TITANIUM SURFACES)

  • 이상한;조인호
    • 대한치과보철학회지
    • /
    • 제45권1호
    • /
    • pp.85-97
    • /
    • 2007
  • Statement of problem: Recently, anodic oxidation of cp-titanium is a popular method for treatment of titanium implant surfaces. It is a relatively easy process, and the thickness, structure, composition, and the microstructure of the oxide layer can be variably modified. Moreover the biological properties of the oxide layer can be controlled. Purpose: In this study, the roughness, microstructure, crystal structure of the variously treated groups (current, voltage, frequency, electrolyte, thermal treatment) were evaluated. And the specimens were soaked in simulated body fluid (SBF) to evaluate the effects of the surface characteristics and the oxide layers on the bioactivity of the specimens which were directly related to bone formation and integration. Materials and methods: Surface treatments consisted of either anodization or anodization followed thermal treatment. Specimens were divided into seven groups, depending on their anodizing treatment conditions: constant current mode (350V for group 2), constant voltage mode (155V for group 3), 60 Hz pulse series (230V for group 4, 300V for group 5), and 1000 Hz pulse series (400V for group 6, 460V for group 7). Non-treated native surfaces were used as controls (group 1). In addition, for the purpose of evaluating the effects of thermal treatment, each group was heat treated by elevating the temperature by $5^{\circ}C$ per minute until $600^{\circ}C$ for 1 hour, and then bench cured. Using scanning electron microscope (SEM), porous oxide layers were observed on treated surfaces. The crystal structures and phases of titania were identified by thin-film x-ray diffractmeter (TF-XRD). Atomic force microscope (AFM) was used for roughness measurement (Sa, Sq). To evaluate bioactivity of modified titanium surfaces, each group was soaked in SBF for 168 hours (1 week), and then changed surface characteristics were analyzed by SEM and TF-XRD. Results: On basis of our findings, we concluded the following results. 1. Most groups showed morphologically porous structures. Except group 2, all groups showed fine to coarse convex structures, and the groups with superior quantity of oxide products showed superior morphology. 2. As a result of combined anodization and thermal treatment, there were no effects on composition of crystalline structure. But, heat treatment influenced the quantity of formation of the oxide products (rutile / anatase). 3. Roughness decreased in the order of groups 7,5,2,3,6,4,1 and there was statistical difference between group 7 and the others (p<0.05), but group 7 did not show any bioactivity within a week. 4. In groups that implanted ions (Ca/P) on the oxide layer through current and voltage control, showed superior morphology, and oxide products, but did not express any bioactivity within a week. 5. In group 3, the oxide layer was uniformly organized with rutile, with almost no titanium peak. And there were abnormally more [101] orientations of rutile crystalline structure, and bonelike apatite formation could be seen around these crystalline structures. Conclusion: As a result of control of various factors in anodization (current, voltage, frequency, electrolytes, thermal treatment), the surface morphology, micro-porosity, the 2nd phase formation, crystalline structure, thickness of the oxide layer could be modified. And even more, the bioactivity of the specimens in vitro could be induced. Thus anodic oxidation can be considered as an excellent surface treatment method that will able to not only control the physical properties but enhance the biological characteristics of the oxide layer. Furthermore, it is recommended in near future animal research to prove these results.

인도네시아산 주요 조림 및 유망 수종의 해부학적 특성 (Anatomical Properties of Major Planted and Promising Species Growing in Indonesia)

  • 김종호;장재혁;권성민;;김남훈
    • Journal of the Korean Wood Science and Technology
    • /
    • 제40권4호
    • /
    • pp.244-256
    • /
    • 2012
  • 본 연구에서는 인도네시아의 목재자원 중 새로운 유망 목재자원을 개발하고 최근 주요 조림 수종들의 효율적 이용을 위한 기초자료를 수집하기 위해 인도네시아산 10수종의 해부학적 특성을 조사하였다. 모든 수종은 산공재로써 고립관공, 방사복합관공이 관찰되었는데, Mangium에서는 위의 특성과 더불어 접선복합관공이 관찰되었다. 접선방향의 관공 직경은 Jeunjing과 Nangka를 제외한 전 수종에서 방사방향보다 큰 값을 보였다. 특히 Nangka는 공시수종 중 가장 큰 접선방향의 관공 직경을 보였다. 단위면적($mm^2$)당 관공의 수는 Mangium, Gandaria와 Kupa가 다른 수종보다 많았으며, 특히 Kupa가 가장 많게 나타났다. 유세포의 접선방향 폭은 Gmelina, Mangium, Kupa와 Mangga가 목섬유의 접선방향 폭보다 크게 나타났으며, 그 중 Mangium이 가장 큰 폭을 보였다. 이 밖의 6수종은 반대로 목섬유의 접선방향 폭이 유세포의 접선방향 폭보다 크게 나타났으나 Durian과 Nangka는 그 차이가 타 수종에 비해 미미했다. Gmelina, Jeunjing과 Rambutan은 평복세포로 이루어진 동성방사조직이, Gandaria는 평복세포와 단열의 직립세포로 구성된 이성방사조직이, Mangium, Durian, Jengkol, Kupa, Mangga와 Nangka는 평복세포와 약 1~2열의 직립세포로 구성된 형태의 이성방사조직이 관찰되었다. Durian, Gandaria, Jengkol, Jeunjing, Mangga, Rambutan은 결정을, Jeunjing과 Mangga는 실리카를 함유하는 특징을 나타냈다.

항균성 Ag-30CaO·70SiO2 Gel의 MC3T3 세포적합성에 관한 연구 (Evaluate the Suitability of MC3T3 Cells to Antibacterial Ag-30CaO·70SiO2 Gel)

  • 윤금재;류재경;안응모;김윤종;김택남;노인섭;조성백
    • 한국재료학회지
    • /
    • 제24권12호
    • /
    • pp.671-676
    • /
    • 2014
  • It is known that bones get damaged by accidents and aging. Since the discovery of Bioglass, various kinds of ceramics have been also found to bond to living bone; some of these ceramics are already being clinically used as bone-repairing materials. In the present study, antibacterial calcium silicate gel ($Ag-30CaO{\cdot}70SiO_2$ gel) was prepared by sol-gel method in order to control the microstructure, which is related to the dissolution rate and induction period of apatite formation in body environment. In addition, biological $Ag-30CaO{\cdot}70SiO_2$ is tested. This was done to impart antimicrobial activity to the $30CaO{\cdot}70SiO_2$. Ag ion was added during sol-gel synthesis to replace the $H_2O$ added during the making of the $30CaO{\cdot}70SiO_2$ gel, which has silver solutions of various concentration. After the sol-gel process, 1N-$HNO_3$ solution was used to wash the gel when synthesizing the gel, in order to maintain the porous structure and remove PEG, water soluble polymers. Then, the apatite forming ability of the sol-gel derived CaO-$SiO_2$ gels was investigated using simulated body fluid (SBF), which had almost the same ion concentration as that of human blood plasma. The gels were analyzed by FT-IR spectroscopy, SEM observation, XRD, and fluorescent microscopy. The apatite was successfully created even after washing the gel; apatite is present in an amorphous state, and was found to affect the concentration of the Ag ion in cells in MC3T3 live & dead assay results. From these results, it is suggested that a good material that can be used to repair defects of nature bone is $Ag-30CaO{\cdot}70SiO_2$ gel.

타공판에 따른 전기집진기 내의 유동분포 (Flow Distribution in an Electrostatic Precipitator with a Perforated Plate)

  • 김동욱;정상현;심성훈;김진태;이상섭
    • 청정기술
    • /
    • 제25권2호
    • /
    • pp.147-152
    • /
    • 2019
  • 각종 산업시설과 발전시설에서 배출되는 입자상 물질의 문제로 인하여, 입자상 물질의 제거 효율이 뛰어난 전기집진기의 중요성이 증가하고 있다. 전기집진기의 효율은 전기집진기 내부의 유동분포에 매우 큰 영향을 받으므로, 전기집진기 내부의 유동 균일화를 위한 연구가 지속적으로 이루어지고 있다. 본 연구에서는 유입부, 디퓨저, 본체, 수축부로 구성된 길이 3.5 m, 높이 0.875 m 전기집진기를 제작하였다. 디퓨저에는 3개의 타공판을 설치하였다. 5개의 피토관을 높이 방향으로 부착하여 전기집진기 단면 55지점의 유속을 측정하였다. 디퓨저에 타공판이 설치되었을 때, 전기집진기 내부의 유동분포는 RMS%를 이용하여 평가하였다. 또한 타공판의 타공률 변화에 따른 유속분포도 분석하였다. 그 결과, 타공판이 전기집진기 내부의 유동분포에 미치는 영향이 매우 큼을 확인하였고, 디퓨저 입구에서부터 40%, 50%, 50% 타공률을 가진 타공판을 설치하였을 때, 가장 균일한 유동분포를 나타내었다.

콘크리트구조물의 반복적 동결융해에 대한 수치 해석적 열화 예측 및 신뢰성 모델 개발 (Development of Deterioration Prediction Model and Reliability Model for the Cyclic Freeze-Thaw of Concrete Structures)

  • 조태준;김이현;조효남
    • 콘크리트학회논문집
    • /
    • 제20권1호
    • /
    • pp.13-22
    • /
    • 2008
  • 다공성 시스템 내부 동결체의 생성과 성장은 온도경사와 화학적 에너지뿐만 아니라 열 물리학적 영향과 이동 물질에 의해서도 영향을 받는다. 더욱이 융해 화학물질의 확산율은 반복적인 동경융해 환경 하에서 매우 높은 값을 나타낸다. 결과적으로 콘크리트구조물의 열화는 해양환경과, 높은 고도 및 북쪽 지방에서 특히 크게 발생된다. 그러나 균열 성장과 누적된 손상에 의한 열화를 동반한 동결융해의 특성은 실험을 통해서 추정하기가 곤란하다. 이러한 손상을 예측하기 위해서 응답면기법 (RSM)을 이용한 회귀분석법을 사용하였다. 콘크리트구조물에서 반복되는 동결융해로 인한 열화의 주요 변수인 물-시멘트비, 연행공기, 동결융해의 반복 횟수 등은 응답면기법의 한계상태방정식을 구성하는데 중요한 입력 변수로 사용되었다. 누적변형률, 상대동탄성계수, 또는 등가 소성변형과 같은 주요한 열화 변수에 대한 회귀방정식은 열화된 구조물의 성능을 평가할 수 있다. 300번의 동결융해 반복 후의 상대동탄성계수와 잔류변형의 결과는 실험 결과와 매우 유사한 경향을 나타내었다. 응답면기법의 결과는 설계 시 한계값에 대한 초과 확률을 예측하는데 사용되어질 수 있다. 그러므로 개발된 예측 기법을 활용하여 반복적인 동결융해에 의해서 누적 손상을 받는 콘크리트구조물의 생애주기 관리에 사용될 수 있다.

이동 경과 시간 계산을 이용한 생물권에서의 방사성 핵종 이동 평가 방법 (Method for Evaluating Radionuclide Transport in Biosphere by Calculating Elapsed Transport Time)

  • 고낙열;지성훈
    • 방사성폐기물학회지
    • /
    • 제18권2_spc호
    • /
    • pp.305-315
    • /
    • 2020
  • 방사성폐기물의 심층처분에서 생물권에서의 방사성 핵종 이동을 핵종의 이동 경과 시간을 계산하여 평가하는 방법이 제안되었다. 방사성 핵종은 자연 방벽에서 유출되어 지하 천부의 지하수 흐름을 따라 대규모 지표수체에 도달한다고 가정하였다. 생물권은 기반암 위에 있는 대수층을 포함하는 천부 지하 환경으로 정의하였다. 제안된 방법을 이용하여, 계산 알고리즘을 수립하였고, 알고리즘을 수행하는 컴퓨터 코드를 작성하였다. 작성된 코드는 간단한 사례에서 계산된 모의 결과를 해석해 계산 결과 및 지표 부근에서의 방사성 핵종 이동에 의한 방사선량 평가에 널리 이용되는 공공 프로그램의 계산 결과와 비교하여 검증하였다. 사례 연구 조건을 가상의 심층처분장에서의 방사성 핵종 이동에 대한 이전 연구를 통해 작성하였다. 작성된 코드는 사례 연구에서 생물권의 하천으로 유출되는 핵종의 이동량을 계산하였다. 이전 연구에서는 가상의 처분장에서 모암까지의 방사성핵종의 이동만을 보여주었기 때문에, 이 코드는 모든 경로를 지나가는 방사성 핵종의 전체적인 이동을 파악하는데 도움이 될 수 있었다.

소형 자동차 페인트 도장부스에서 발생하는 점착성 paint aerosol 처리장치에서 제거성능 (Removal Performance of Sticky Paint Aerosol Control System Generated from Small Scale Car Paint Overspray Booth)

  • 이재랑;;전성민;이강산;손종렬;박영옥
    • 한국대기환경학회지
    • /
    • 제31권1호
    • /
    • pp.54-62
    • /
    • 2015
  • Small scale paint overspray booths are being operated nationwidely, for repair of passenger car body parts. paint aerosols are emitted from the paint overspray booth in operations. In paint overspray booth operations without ventilation system and air pollutants collection unit, it may land on nearby equipment. In this study a removal of sticky paint aerosol for application of the small-scale overspray paint booth. it's cause the surface of filter bag from generated sticky paint aerosol. To remove adhesion of paint aerosol the agglomerating agents are injected and mixed with sticky paint aerosols prior to reach the filter bag. The paint spray rate was set as $10{\pm}5g/min$ from air-atomized spray guns in the spray booth, injection rate of agglomerating was $10{\pm}5g/min$ in the mixing chamber. The filtration velocity including air pollutants varied from 0.2 m/min to 0.4 m/min. Bag cleaning air pressure was set as $5.0kg_f/min$ for detaching dust cake from surface of filter bag. Bag cleaning interval at the filtration velocity of 0.2 m/min was around 3 times longer than that of the 0.4 m/min. The residual pressure drop maintained highest value at the highest filtration velocity. Fractional efficiency of 99.952%~99.971% was possible to maintain for the particle size of 2.5 microns. Total collection efficiency at the filtration velocity of 0.2 m/min was 99.42%. During this study we could confirm high collection efficiency and long cleaning intervals for the test with filtration velocity of 0.2 m/min indicating an optimal value for the given dimensions of the test unit and test operating conditions.

인도네시아산 White Jabon과 Red Jabon의 해부학적 특성 비교 (Comparison of Anatomical Characteristics of White Jabon and Red Jabon Grown in Indonesia)

  • 김종호;장재혁;류재윤;황원중;;김남훈
    • Journal of the Korean Wood Science and Technology
    • /
    • 제41권4호
    • /
    • pp.327-336
    • /
    • 2013
  • 인도네시아에서 자생하는 수종인 White Jabon (Anthocephalus cadamba)과 Red Jabon (Anthocephalus macrophyllus)의 해부학적 특성을 IAWA 분류기준에 의거하여 조사 및 비교하였다. 두 수종은 산공재로서, 대부분 2~3열의 방사복합관공의 형태로 관찰되었다. 접선방향의 도관 직경은 $100{\sim}200{\mu}m$의 범위로, $mm^2$당 도관의 수는 5~20개의 범위로 분류되었고, White Jabon의 도관수가 더 많았다. 두 수종에서 $mm^2$당 고립관공의 수는 비슷했으나 복합관공은 White Jabon이 다소 많이 출현하였다. 두 수종의 횡단면에서 축방향유조직은 산재상의 형태를 보였으나, White Jabon은 그 출현빈도가 매우 낮았다. 방사단면에서 방사조직은 평복세포와 4열 이상의 직립세포로 구성된 형태가 주로 관찰되었으며, 부분적으로 직립동성형 방사조직이 관찰되었다. 접선단면상에서 White Jabon의 방사조직은 1~V3열, Red Jabon은 1~2열로 관찰되었으며, 방사조직의 높이는 White Jabon이 $420{\mu}m$, Red Jabon이 $474{\mu}m$로 나타났다. 목섬유의 평균 길이는 $900{\sim}1,600{\mu}m$의 범위였고, 수에서 수피부로 이행할수록 증가하는 방사방향 변이성을 나타냈다.