• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.361-366
• /
• 2005

Since most soils exist above the ground water table, negative pore pressure exist in unsaturated soils. Negative pore water pressure in unsaturated soil affects the soil structure and degree of saturation and it is important for accurate evaluation of unsaturate flow and behavior. This negative pore pressure is called a matric suction which causes an increased shear strength. Therefore, it is required that the effect of increase in the shear strength should be included in a geotechnical analysis. From the test result, the influence of net confining pressure and matric suction on the shear strength was analyzed and strength parameter was increased with matric suction increase and a unliner relationship was found to relate matric suction and shear strength.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1204-1211
• /
• 2008

Compression index is one of the important characteristic numbers in soft soil engineering. Since 1940's, many researchers have suggested various practical solutions to define the compression index of clay using other soil properties. But, these results are only can give us an outline of soft soil behavior. In this study, the relationships between pore water pressure dissipation test results and compression index were suggested using comparison results of both tests. This relationships are based on basic concept of consolidation phenomena, essential difference between pore water pressure dissipation test and consolidation test, and disagreements between theoretical time factor and real time factor. To identify proportional factor of proposed equation, Geotechnical investigation results of Kwang-Yang(KY) site and Busan New Port(BN) site were used. The proportional factor was 0.0031 from 20 to 50% of consolidation rate where correlation parameter($R^2$) is 0.9051.

• 한국도로학회논문집
• /
• 제17권1호
• /
• pp.59-67
• /
• 2015

PURPOSES : In this study, an image analysis method is used to evaluate the pore structure characteristics and permeability of hybrid concrete. METHODS : The binder weight of hybrid concrete is set to $400kg/m^3$, $370kg/m^3$, and $350kg/m^3$, and for each value of binder weight, the pore structure and permeability of concrete mixture is evaluated. The permeability of hybrid concrete is evaluated using a rapid chloride penetration test(RCPT). RESULTS : The concrete pore structure characteristics of hybrid concrete reveals that as the binder weight is reduced, the entrained air is reduced and the entrapped air is increased. The permeability of the hybrid concrete for all values was measured to be below 1000 C, which indicates a "Very Low" level of permeability relative to the evaluation standard of KS F 2711. Additionally, as the binder weight is decreased, there is a significant increase in the permeability of chloride ions. CONCLUSIONS : In this study, the pore structure characteristics of hybrid concrete at different binder weights shows that as the binder weight is reduced, the entrained air is reduced and the entrapped air is increased. Consequently, chloride ion penetration resistance of the hybrid concrete is diminished. As a result, it is expected that this will reduce the concrete's durability.

• 한국산학기술학회논문지
• /
• 제10권11호
• /
• pp.3287-3295
• /
• 2009

본 연구는 강우재현장치를 제작하고, 화강암질 풍화토로 조성된 모형사면에 강우 및 사면조건에 따라 모형실험과 수치해석을 실시하였다. 모형실험에서 계측된 체적함수비와 간극수압의 변화특성을 분석하였으며 또한 수치해석 결과와 비교하였다. 체적함수비는 강우강도가 크고 사면경사가 급할수록 한계값에 도달하는데 짧은 시간이 소요되는 반면 강우강도가 작고 사면경사가 완만할수록 많은 시간이 소요되는 것으로 나타났다. 강우강도가 작고 강우지속시간이 짧을수록 더 큰 부의 간극수압을 나타내고 회복하는 시간도 짧은 것으로 나타났다. 이와 반면 강우강도가 크고 강우지속시간이 길수록 부의 간극수압을 회복하는데 오랜 시간이 소요되는 것으로 나타났다. 강우재현 모형실험과 수치해석을 수행한 결과 체적함수비와 간극수압의 분포경향이 유사하게 나타났다. 그러나 체적함수비는 최대 5% 정도, 간극수압은 최대 3kPa 정도의 차이를 보였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.355-358
• /
• 2005

Fingerprint recognition systems are the most widely used in biometrics for personal authentication. As they become more familiar, the security weaknesses of fingerprint sensors are becoming better known. In this paper, we propose a liveness detection method that applies correlation filter to the fingerprint recognition systems. The physiological characteristic of sweat pore, observed only in live people, is used as a measure to classify 'live' fingers from 'spoof' fingers. Previous works show that detection of sweat pores and perspiration patterns in fingerprint images can be used as an anti-spoofing measure. These methods don't consider the characteristic of pores in each individual. We construct the correlation filters of each individual which are composed of their pore information. We make the final decision about the "livens" of fingerprint using correlation output. The proposed algorithm was applied to a data set of 110 live, 110 spoof fingerprint images from optical fingerprint scanner and achieved classification rate of 80%.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.365-370
• /
• 2001

There are various wick types for heat pipe. In the present study, the manufacturing technology of a sintered wick among various wick types is discussed. The sintering technology using metal has been applied broadly in the field of electronic-telecommunication as well as heat pipes. A study of manufacturing procedure and characteristic of sintered wick for heat pipe have been performed. Copper powder was used as wick material and stainless steel as a mandrel. A manufacturing technology of the mandrel for arranging vapor core in heat pipe, a sintering technology by first or second times and operating temperature for sintering, the measurements of a porosity, pore size, and pore distribution of sintered wick were considered. In the meantime, a heat pipe with sintered wick has been manufactured and a performance test of the heat pipe has been performed in order to review cooling performance. The performance test results for the 4mm diameter heat pipe with the sintered wick shows the stability since the temperature difference between a evaporator and a condenser of the heat pipe is less than $4.4^{\circ}C$, and thermal resistance is less than $0.7^{\circ}C/W$.

• Korean Chemical Engineering Research
• /
• 제48권3호
• /
• pp.405-408
• /
• 2010

박막의 흡착특성인 흡착표면적과 세공크기를 수정진동자를 이용하여 측정하는 새로운 방법을 제안하였으며 그 성능을 조사하였다. 수정진동자의 표면에 박막을 직접 제조하여 흡착능을 측정함으로써 박막상태에서 흡착능을 측정하였으며, 이산화탄소를 피흡착 기체로 사용하여 측정이 용이하도록 하였다. 흡착측정 결과로부터 흡착면적은 양호하게 측정이 가능함을 알 수 있었으나, 세공크기의 측정에는 다소 오차가 발생하였다. 간단히 구할 수 있는 이산화탄소를 이용하여 상온에서 박막상태 흡착제의 흡착능 측정이 가능함을 제시하였다.

• 지질공학
• /
• 제24권1호
• /
• pp.1-8
• /
• 2014

Numerical stability analysis of an unsaturated infinite slope under rainfall-induced infiltration conditions was performed using generalized effective stress to unify both saturated and unsaturated conditions The soil-water characteristic curve (SWCC) of sand with a relative density of 75% was initially measured for both drying and wetting processes. The hydraulic conductivity function (HCF) and suction stress characteristic curve (SSCC) were subsequently estimated. Under the rainfall-induced infiltration conditions, transient seepage analysis of an unsaturated infinite slope was performed using the finite element analysis program, SEEP/W. Based on these results, the stability of an unsaturated infinite slope under rainfall-induced infiltration conditions was examined in relation to suction stress. According to the results, the negative pore-water pressure and water content within the slope soil changed over time due to the infiltration. In addition, the variation of the negative pore-water pressure and water content led to a variation in suction stress and a subsequent change in the slope's factor of safety during the rainfall period.

• 한국지반공학회논문집
• /
• 제19권1호
• /
• pp.41-49
• /
• 2003

우리나라에서 흔히 볼 수 있는 화강풍화토 사면에서 강우침투로 인한 사면파괴는 통상 지하수위 위쪽의 얕은 깊이에서 발생한다. 지하수위 위쪽 지반의 간극수압은 대기압에 대하여 음의 값을 갖는다. 이러한 모관흡수력의 존재와 크기는 사면의 안정성에 크게 기여하는 것으로 밝혀졌다. 따라서, 계절적 강우에 의한 풍화토 사면의 얕은 파괴기구(failure mechanism)를 규명하기 위해서는 비포화대에서의 모관흡수력 분포를 예측하는 것이 필수적이다. 이 연구에서는 2001년 6월부터 8월까지 화강풍화토 사면에서 모관흡수력 및 체적함수비를 현장 모니터링 하였으며, 대상지반에 대한 투수해석을 수행하였다. 현장 모니터링 결과, 기후조건의 영향력은 깊이에 따라 감소하는 경향을 보였으며 강우침투에 의한 지반내 모관흡수력의 감소는 강우량 및 강우지속시간 뿐만 아니라 강우직전의 모관흡수력 분포에도 큰 영향을 받고 있는 것으로 나타났다. 모니터링된 모관흡수력과 체적함수비를 이용하여 현장 흙-수분특성을 얻을 수 있었는데 습윤경로(wetting path)에 가까운 분포를 보였다.

• 한국분말재료학회지
• /
• 제22권2호
• /
• pp.100-104
• /
• 2015

The porous metals are known as relatively excellent characteristic such as large surface area, light, lower heat capacity, high toughness and permeability. The Fe-Cr-Al alloys have high corrosion resistance, heat resistance and chemical stability for high temperature applications. And then many researches are developed the Fe-Cr-Al porous metals for exhaust gas filter, hydrogen reformer catalyst support and chemical filter. In this study, the Fe-Cr-Al porous metals are developed with Fe-22Cr-6Al(wt) powder using powder compaction method. The mean size of Fe-22Cr-6Al(wt) powders is about $42.69{\mu}m$. In order to control pore size and porosity, Fe-Cr-Al powders are sintered at $1200{\sim}1450^{\circ}C$ and different sintering maintenance as 1~4 hours. The powders are pressed on disk shapes of 3 mm thickness using uniaxial press machine and sintered in high vacuum condition. The pore properties are evaluated using capillary flow porometer. As sintering temperature increased, relative density is increased from 73% to 96% and porosity, pore size are decreased from 27 to 3.3%, from 3.1 to $1.8{\mu}m$ respectively. When the sintering time is increased, the relative density is also increased from 76.5% to 84.7% and porosity, pore size are decreased from 23.5% to 15.3%, from 2.7 to $2.08{\mu}m$ respectively.