• Journal of the Ergonomics Society of Korea
• /
• v.30 no.3
• /
• pp.389-394
• /
• 2011

The aims of this study are to investigate the Korean population stereotype for control-display linkage of four-burner gas-range, and to compare the results of this study with those of the existing studies. The investigation used a paper-pencil test using questionnaire with a sign code system for eliminating suggestive effect of sequential code. Two hundreds and eighty subjects participated in the investigation, among whom 254 subjects effectively responded to question for the gas-range stereotype. The results showed that type III(refer to Table 2) was chosen more frequently than type II, IV and V(p<0.01). The gender is not significant on responding rate for the type of control-burner linkage(p>0.92), while the age and occupation have significant effect on the rate(p<0.01). Based on this study, it appears that type III represents the population stereotype of control-burner arrangement for Korean. The stereotype was the same as that of Chinese, but different from that of American(type II or IV). The findings of this study would be helpful as basic data for ergonomically designing gas-range or similar products.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.4
• /
• pp.99-106
• /
• 2004

In developing criteria for establishing workstation reach limits, it is essential to select the appropriate anthropometric stereotype for solving a specific design problem. The most important factor for comfortable workstation is to eliminate trunk flexion from the neutral (upright) posture. A solution to this design can be developed using population stature and link length data. This paper provides a methodology for design of comfortable workstation using anthropometric stereotype. Application of this methodology can be utilized in various designs for work space including standing and sitting workplace. For the purpose of this study, the data are measured by some parts on body such as stature, arm length, wrist height, elbow height, and shoulder hight. The samples for this study are randomly chosen from university students in Seoul and Kangnung during sixteen months (2003.3-2004.6).

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.3
• /
• pp.463-467
• /
• 2012

This study aims to empirically investigate population stereotype of burner-control linkage of four-stove gas range for Koreans. Background: The previous studies' results for gas range stereotypes were different depending upon methods adopted, i.e., whether using questionnaires, computer simulation or physical models. It is known that the physical model experiment should not be methodologically replaced by the computer simulation or paper-and-pencil tests. Stereotype of gas range for Koreans was surveyed based on questionnaires, but has not been dealt with by using physical models. Method: An experiment was conducted to investigate stereotype of four-burner gas range, in which 32 subjects participated and a real gas range available in the market was bought and used. Four types of burner-control linkage were used as independent variable, and reaction time as dependent variable. Results: ANOVA revealed that four types of burner-control linkage and subjects' gender were not significant on reaction time. Duncan's multiple range test showed that reaction times for type III was significantly lower than those for the other three types of burner-control linkage(${\alpha}$=0.05). Conclusion: It is concluded based on the results of this study that stereotype of gas range for Koreans is type III. This is in agreement with results of existing studies using questionnaire survey, while different from those based on physical models. Application: The results of this study would be useful as an ergonomic guideline when designing gas ranges or similar equipments for minimizing operation errors.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.3
• /
• pp.87-94
• /
• 2009

Today's driver information system often features a rotary control type as a main controller for menu navigation. Population stereotype should be clearly understood in designing those systems to minimize the misunderstanding by the operator. This paper investigates stereotypes for rotary controlled menu interfaces and influences of contributing principles. A human factors experiment was conducted using various configurations of control-display layouts, cursor shapes/positions, and movement directions. The results showed that the control should be on the left of the display, with a rightward icon on the right side of the cursor, in order to match the stereotype. Regression analysis indicated that Warrick's principle was the most influential principle, followed by Icon shape, Icon position, Clockwise away, and Clockwise up principles. This study provides valuable information to designers of menu-based systems such as driver information systems and main control rooms that uses rotary controls.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.3
• /
• pp.267-271
• /
• 2013

Objective: The purpose of this study is to examine the test-retest reliability of paper-pencil test for investigating population stereotype of burner-control linkages of four-stove gas ranges. Background: Much of the research on gas-range stereotype strength has been performed using the paper-pencil test. While the use of the paper-pencil tests has the advantage of collecting data in a large group of subjects against reasonable costs, concerns regarding the reliability of the paper-pencil test has also been stated. Method: Three paper-pencil tests classified by intervals of test-retest were performed, in which eight types of burner-control arrangements were investigated. Sixty eight subjects were test-retested within two weeks, 85 subjects were test-retested within four weeks and 58 subjects were test-retested three times in series with interval of two and four weeks. Results: Chi-square test showed that three intervals of test-retest including two, four and two & four weeks have not statistically significant effect on subjects' responses irrespective of eight types of burner-control linkages dealt with in this study(p>0.10). Concordance rates of subjects' responses ranged between 73.5% and 100.0% for two-week test-retest, between 67.1% and 97.6% for four-week test-retest, and between 65.5% and 100.0% for two- and four-week serial test-retest. The concordance rates were linearly correlated with proportion of subjects' responses for stereotypes of burnercontrol linkages. Conclusion: It is concluded that the paper-pencil tests for investigating gas range relevant stereotypes could reproduce reliable results compared to baseline test within interval of four weeks. Application: The results of this study would be useful as an ergonomic guideline when designing the paper-pencil tests for stereotype relevant studies.

• IE interfaces
• /
• v.17 no.1
• /
• pp.104-112
• /
• 2004

The purposes of the study were twofold: to investigate the stereotype of position and direction that the users expect when operating the handles of a water faucet in different directions, and to collect information about user’s preferred directions. Six hundred subjects, aged from teens to over sixties, participated in the experiment with the procedure of showing them actual water faucets of a lever-type handle and two round-shaped handles mounted on the sink(horizontal plane) and wall(vertical plane). The water faucets presented to the subjects were most widely used devices in our living environment. The results showed that when the handle of the lever-type water faucet was in the 'up' position, 63% of the subjects expected the device was 'open'. When the cold hot separated water faucets were mounted on the horizontal or vertical plane, over 50% of those who answered the 'open' direction of round type handles responded as 'counter clockwise' for a 'hot' water faucet and 'clockwise' for a 'cold' water faucet. In conclusion, this study suggests that water faucet devices be designed and installed in the way that the users expect them to operate.

• Journal of Korean Institute of Industrial Engineers
• /
• v.29 no.4
• /
• pp.283-291
• /
• 2003

The purposes of this study are to investigate the stereotype of position and direction that users expect door lock control devices in different orientations, and to collect information regarding preferred door lock design and orientations. Six hundred subjects aged from lOs to 60s were surveyed under the operating conditions of three different door locks(cylindrical, circular-type, and lever-type auxiliary locks) mounted on the miniature door in two different orientations(right and left side). The door locks presented to the subjects were the most widely used door locks in our living environment. The results indicated that if the door locks were seen from the inside, 59~67% of the subjects expected 'vertical' position locking depending on the door lock control types, cylinder or auxiliary lock. When the door locks were seen from the outside, the locking direction of door lock control was not consistent either 'clockwise' or 'counterclockwise'. It was rather dependent on the orientation of the door lock positions. As a concluding remark, it is better to design and install door lock control devices in the way that users expect them to work.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.1
• /
• pp.187-199
• /
• 2004

To suggest a more efficient way of delivering information for process control under computerized environment, population stereotypes of colors were tested with 57 Korean subjects. The subjects were asked to associate 11 colors salient at electronic video displays with 55 pairs of adjectives that might be used when they explain the current state of process. The levels of association were evaluated with semantic differential methods by 7 point scales. Based on the multivariate analyses, the 55 pairs of adjectives were grouped into three distinct dimensions. The emotional maps of the 11 colors with respect to each dimension were presented. The Quantitative relationships between the colors and subjective impressions were also calculated by quantification theory I. On the basis of these color associations, it was suggested a general guideline for color coding when delivering process information

• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.385-387
• /
• 2001

This is a brief report oil the characteristics of elderly persons in Korea for product liability and product safety. Recently. the elderly persons rapidly go on increasing in number. So, the considerations of their characteristics in product design become more and more important not only for product safety but for the commercial target. We describe a result from the survey on some of the characteristics such as Stereotypical or common expectations in type, size, motion characteristics, and direction of control operation(i.e., population stereotypes), depth perception, and tracking performance through a structured interview and experiments. This basic study will go on.

• Archives of design research
• /
• v.11 no.1
• /
• pp.73-80
• /
• 1998

Recently, the importance of cultural design has been increasing due to the globalization. However the cultural design is mainly focusing on the shape or color stereotype of different cultures, ignoring another important aspects of cultural design: the way of peoples' interacting with product. The study aims to develop usability test program for cultural user-interface design that operates in the world wide web. The study begins with discussing the nature of culture through defining culture and reviewing the depth and variables of culture. Based on the findings the structure of the usability testing program on the WWW design methods is identified. The usability testing program on the WWW comprises of five different modules: module for identifying users' demographic characteristics, module for cultural variables, module for population stereotype, module for usability testing, and module for data storage and analysis. Finally findings are summarized and further research prospects are outlined.