• Proceedings of the Polymer Society of Korea Conference
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.158-158
• /
• 2006

The correlation between liquid-liquid phase separation (LLPS) and crystallization at several compositions in statistical copolymer blends of poly (ethylene-co-hexene) (PEH) and poly (ethylene-co-butene) (PEB) has been examined. In this case, the LLPS is coupled with the other ordering process, i.e. crystallization. The overwhelming change in the crystallization kinetics due to the composition fluctuation caused by the spontaneous spinodal LLPS is observed. This coupling mechanism suggests a new mechanism in the nucleation-crystallization process.

• Proceedings of the Polymer Society of Korea Conference
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.377-377
• /
• 2006

Alkoxyamine and thiocarbonyl thio end capped polyethylene (PE) chains were synthesized using a direct and simple approach consisting in reacting di(polyethylenyl)magnesium (PE-Mg-PE) chains with a range of nitroxides and disulfides of thiocarbonyl thio compounds. PE-Mg-PE compounds were prepared by a catalyzed chain growth reaction of ethylene on nbutyloctylmagnesium (BOMg) with a neodymocene complex $(C_{5}Me_{5})_{2}NdCl_{2}Li(OEt_{2})_{2}$. Complete characterizations confirm the introduction of the desired end groups. The controlled radical polymerization (NMP and RAFT) of butyl acrylate mediated by these functional polyethylenes was successful.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.244-247
• /
• 2002

In order to evaluate the water ingress to URD power cables with the jacketing materials and the cable structures, water vapor transmission (WVT) tests were carried out by the ASTM and the TEPCO's specification. All polyolefin compounds showed the superior water suppression to conventional PVC. Especially, linear polyethylenes have very low WVT. In case of cable structures, Allaminate cables showed the significant water suppression due to the watertight structure. Accordingly, it can be concluded that jacketing material and cable structure play an important role in the water suppression of URD power cables.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1977-1983
• /
• 2009

This paper described partial discharge(PD) patterns depending on types of insulation defects in CNCO-W cable(Concentric Neutral Closs-linked Polyethylene Insulated Polyolefin-Water Proof Sheathed Power Cable). The PD measurement system consists of a coupling network, a detection impedance, and a low noise amplifier. A 16 bit, 250 MS/s data acquisition system was used to analyze PD patterns. To simulate insulation defects in a power cable, a needle with the curvature radius of $10{\mu}m$ was inserted into the insulation part. We measured phase ($\Phi$), magnitude (q), and counts (n) of PD pulse for the defects, and classified PD patterns using the PRPD (phase Resolved Partial Discharge) method. From the analysis of acquired PD signals, we could find that a unique PD pattern is formed according to the types of defect.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.137-142
• /
• 2011

Individual solar cells must be connected together to give the appropriate current and voltage levels and they must also be protected from damage by the environment. [1] PV module consists of a glass/ polymer encapsulation/ solar cell string/ polymer encapsulation/ back sheet. Usually, encapsulation materials is used EVA(ethylene vinyl acetate), PVB(polyvinyl butyral), PO(polyolefin)sheet. This study is about fabrication of module using silicone material instead of above them. We got to know advantage that is fabrication time and efficiency of modules.

• Food Science and Biotechnology
• /
• 제16권1호
• /
• pp.62-66
• /
• 2007

Four different biopolyester films, two aliphatic polyesters including polylactides (PLA) and poly(3-hydroxy-butyrate-co-3-hydroxyvalerate (PHBV), and two aliphatic-aromatic copolyesters including Ecoplex and Biomax, were prepared using by thermo-compression, and their tensile and water barrier properties were determined. Among the films tested, PLA film was the most transparent (T: 95.8%), strongest, and stiffest (TS, 40.98 MPa; E, 1916 MPa), however it was rather brittle. In contrast, Ecoplex film was translucent while being the most flexible and resilient (EB, 766.8%). Biomax film was semitransparent and was the most brittle film tested (EB, 0.03%). All biopolyester films were water resistant exhibiting very low water solubility (WS) values ranging from 0.0.3 to 0.36%. PHBV film showed the lowest water vapor permeability (WVP) value ($1.26{\times}10^{-11}\;g{\cdot}m/m^2{\cdot}sec{\cdot}Pa$) followed by Biomax, PLA, and Ecoflex films, respectively. The water vapor barrier properties of each film were approximately 100 times higher than those of carbohydrate or protein-based films, but about 100 times lower than those of commodity polyolefin films such as low-density polyethylene (LDPE) or polypropylene (PP).

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• 제1권1호
• /
• pp.20-28
• /
• 1995

The conditions of Soxhlet extraction and HPLC analysis were examined for the determination of antioxidants used for polyolefins manufacturing. The extraction with methylene chloride in a Soxhlet apparatus for 10 hours and above provides almost complete recovery of the additives from polyolefins. The determination of the antioxidants including BHT, Irganox 1076, Irganox 1010 and Irgafos 168 could be successfully performed by using reversed-phase HPLC under gradient elution where the baseline separation of all four antioxidants in a single run was possible. In addition, the antioxidants inherently contained in commercial LLDPE and OPP films were identified and quantitatively determined.

• Prospectives of Industrial Chemistry
• /
• 제24권2호
• /
• pp.1-9
• /
• 2021

플라스틱은 가볍고 물성이 뛰어나며 가공이 용이하면서도 낮은 가격 때문에 우리의 실생활에서 매일 사용되고 있다. 동시에 썩지 않는 특성 탓에 폐플라스틱에 의한 환경오염의 문제가 심해짐에 따라 전 세계적으로 일회용 포장재 및 용기에 사용되는 플라스틱의 사용을 금지하는 규제 및 폐플라스틱을 재활용하려는 시도가 늘어나고 있다. 하지만 인류가 지난 수십 년간 생산한 플라스틱은 약 83억 톤이지만 이중 약 10%정도만 재활용 되었을 정도로 폐플라스틱의 재활용 비율은 미비하다. 특히, 최근 코로나 팬데믹으로 인해 택배 및 배달음식 주문량이 늘어남에 따라 플라스틱의 사용량이 급증하여 폐플라스틱의 재활용 필요성은 더욱더 커지고 있다. 본 기고문에서는 불균일 촉매를 이용한 수소첨가 폐플라스틱의 분해에 관한 최신 연구동향을 다루고자 한다. 안정적이고 반응성 및 선택성이 뛰어난 촉매 개발은 폐플라스틱의 효과적인 분해를 위해서 매우 중요하다.

• Applied Chemistry for Engineering
• /
• 제26권2호
• /
• pp.199-204
• /
• 2015

Thermoplastic road markings are one of the most widely used road markings in the world. However, the durability of domestic road markings is relatively shorter than that of the global average of, approximately, three years. To overcome it, the conventional thermoplastic road markings were prepared by adding polyolefin and oxidized PE wax to conventional petroleum resin. In addition, the melting viscosity was designed below 500 cP at $220^{\circ}C$ as well as the optimum viscosity for spray painting, and embedding ratio of glass beads were controlled about 50~60% by spraying in an interval of 1 second. Also the glass bead adhesive ratio was improved by reducing the amount of $CaCO_3$ below 40 wt%. The retroreflectivity was tested under four different conditions to evaluate the abrasion resistance of thermoplastic road markings. The retroreflectivity coefficient satisfied the international standard ($150mcd{\cdot}m^{-2}{\cdot}lux^{-1}$) in this study, and TPRM-7 was determined as an optimal ratio.

• Fire Science and Engineering
• /
• 제16권1호
• /
• pp.18-23
• /
• 2002

Efficiency estimation of toxicity free resistance cable experiments were conducts to understand toxicity free fire ersistance polyolefin insulation material and smoke density characteristic and combustion gas corrosion analysis. A main cause of fire-growth and generating toxic gas when it burns, should be dealt with great care in life safety design. Similar patterned fire incidents such as, Inchon Live-Hof Pub Restaurant as, Sea-land Children Resort have proven that serious loss of lives were caused by hazardous gas generated fire resistance cable materials. In this paper, Referenced documents were ASTM E662 standard test method for specific Ds genalated by solid materials. The furnace control system shall maintain the required irradiance level under steady-state condition with the chamber door closed of 2.5$\pm40.04〔w/$\textrm{cm}^2$〕for 20 min. According to the results of the smoke density analysis of NFR-8 and FR-PVC the highest decomposition flaming smoke density range of NFR-8 and FR-PVC were 25.2 to 37.5 and 51.1 respectively. Nonflaming smoke density range of NFR-8 and FR-PVC were 100.4 to 112.2 and 126.5 to 398.8. Also, the fire gases was occurred carbon monoxide and decomposition than in polyolefin due to incomplete combustion of PVC which has high content of carbon in chemical compound.