• 대한방사선기술학회지:방사선기술과학
• /
• 제40권1호
• /
• pp.13-18
• /
• 2017

본 논문은 GATE (geant4 application for tomographic emission) 시뮬레이션을 이용하여 다양한 모양과 재질의 팬텀에서 CTDI (computed tomography dose index)를 평가하였다. GATE 시뮬레이션은 실린더 기둥, 타원 기둥과 육각 기둥 형태와 물, PMMA (polymethyl methacrylate), polyethylene 그리고 polyoxymethylene 재질의 다양한 지름(1 ~ 50 cm)의 팬텀을 모사하여 $CTD_{I100center}$ 값을 비교하였다. 120 kV, 200 mAs에서 실린더 기둥, 타원 기둥과 육각 기둥의 $CTDI_{100center}$ 값은 각각 11.1, 13.4 그리고 12.2 mGy이었다. 이 결과는 동일 볼륨이지만 팬텀의 형태에 따라 $CTDI_{100center}$ 값의 차이가 있음을 알 수 있다. 그리고 물, PMMA 그리고 polyoxymethylene 팬텀의 $CTDI_{100center}$ 값을 비교했을 때 물질의 밀도가 높을수록 상대적으로 $CTDI_{100center}$ 값이 낮게 측정되었다. 하지만 polyethylene의 경우 지름이 15 cm ($CTDI_{100center}$ : 35.0 mGy) 이 상에서는 PMMA 보다 $CTDI_{100center}$ 값이 증가하였다. 그리고 30 cm ($CTDI_{100center}$ : 17.7 mGy) 이 상의 지름에서는 물 보다 더 높은 $CTDI_{100center}$ 값을 보였다. 본 실험을 통해 팬텀의 재질 및 모양에 따른 $CTDI_{100center}$ 값을 GATE 시뮬레이션을 이용하여 평가하였다. CT 선량 평가시 다양한 재질 및 인체에 가까운 모양의 팬텀을 사용함으로써 좀 더 정확한 환자선량을 평가할 수 있을 것이다.

• 한국임상수의학회지
• /
• 제31권6호
• /
• pp.519-522
• /
• 2014

2년령 2 kg 말티즈가 진행성 사지마비와 목의 통증으로 내원하였다. 개는 알 수 없는 외상 이후 지난 2주간 스테로이드로 처치되었으나 점진적으로 상태가 악화되었고, 사지마비 상태가 되었다. 내원 시 개는 보행이 불가능한 사지마비 상태를 보였다. 방사선 사진과 CT 결과, C2의 가로골절과, 환추관절과 C2-C3의 불완전 탈구가 발견되었다. 추가적으로, MRI 상에서 뇌수종이 관찰되었다. Screw, Wire 와 PMMA를 사용한 C1-C3의 안정화가 시행되었다. 수술 후 4주에 임상 증상이 개선되었고, 개는 수술 6주 후에 이전과 마찬가지로 보행이 가능하였다. 본 증례의 Screw, Wire 와 PMMA를 안정화로 경추 골절을 효과적으로 치료하였다.

• Restorative Dentistry and Endodontics
• /
• 제29권6호
• /
• pp.548-552
• /
• 2004

본 연구는 제어방출형 근관소독제(CRD)로 부터 chlorhexidine (CHX)의 방출 속도를 제어하기 위한 3가지 polymer (chitosan, PMMA, PLGA) 의 코팅 효과를 평가하기 위함이다. 80번 paper point (Sure-EndoTM)에 20% CHX를 loading 한 후 각 군당 10개씩 4군으로 분류하였다: Group A: 폴리머를 코팅하지 않은 CRD prototype (control), Group B: chitosan-coated prototype, Group C: PMMA-coated prototype, Group D: PLGA-coated prototype. 모든 시편은 3 ml 증류수가 담긴 큐벳에 넣은 후 3, 6, 10, 20, 30, 40, 50분 마다, 1, 2, 3, 4, 5, 6시간마다 각각 10 μl 씩 채취하고, 1주일 후 다시 10 μl을 채취한 후 UV 흡광도를 이용하여 CHX의 방출 속도를 비교하였다. 실험결과 제어방출형 근관소독제로부터 CHX의 방출속도는 대조군, 키토산, PLGA, PMMA-군 순으로 천천히 일어났으며 PMMA군에서 가장 천천히 일어났다. 결론적으로 제어방출형 근관소독제 표면의 폴리머는 약물 (CHX) 방출속도를 효과적으로 제어하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.191-194
• /
• 2007

In hot embossing lithography which has shown to be a good method to fabricate polymeric patterns for IT and bio components, it is very important to determine the proper process conditions of pressure, temperature, and time. It is also a key factor for predicting the optical properties of final product to calculate residual stress distribution after the embossing process. Therefore, to design the optimum process with right conditions, the ability to predict viscoelastic behavior of polymer during and after the hot embossing process is required. The objective of the present investigation is to establish simulation technique based on constitutive modeling of polymer with experiments. To analyze deformation behavior of viscoelastic polymer, the large strain material properties were obtained from quasi-static compression tests at different strain rates and temperatures and also stress relaxation tests were executed. With this viscoelastic material model, finite element simulation of hot embossing was executed and stress distribution is obtained. Proper process pressure is very important to predict the defect and incomplete filling.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.333-338
• /
• 2003

Nano-imprint lithography(NIL) is a polymer embossing technique, capable of transferring nano-scale patterns onto a thin film of thermoplastics such as polymethyl methacrylate(PMMA) using this parallel process. Feature size down 10 nm have been demonstrated. In NIL, the pattern is formed by displacing polymer material, which can be squeeze flow of a viscous liquid. Due to the size of the pattern, a thorough understood of the process through experiments may be very different. Therefore we nead to resort to numerical simulation on the embossing process. Generally, there are two ways of numerical simulation on nano-scale flow, namely top-down and bottom-up approach. Top-down approach is a way to simulate the flow assuming that polymer is a continuum. On the contrary, in the bottom-up approach, simulation is peformed using molecular dynamics(MD). However, as latter method is not feasible yet. we chose the top-down approach. For the numerical analysis, two dimensional moving grid was used since the moving grid can predict the flow front. Effects of surface tension as well as the slip at the boundary were also considered.

• 한국세라믹학회지
• /
• 제45권9호
• /
• pp.537-543
• /
• 2008

Effect of template size ratio on porosity and mechanical properties of porous zirconia ceramics were investigated using two different size (${\sim}8{\mu}m$ and ${\sim}50{\mu}m$ in diameter) of polymethyl methacrylate-coethylene glycol dimethacrylate (PMMA) microbeads as sacrificial templates. Porosity of the porous zirconia ceramics increased with decreasing the template size ratio ($8{\mu}m: 50{\mu}m$) whereas the compressive and flexural strengths of the porous zirconia ceramics increased with increasing the template size ratio. By controlling the template size ratio, sintering temperature and sintering time, it was possible to produce porous zirconia ceramics with porosities ranging from 57% to 69%. Typical flexural and compressive strength values of porous zirconia ceramics with ${\sim}60%$ porosity were ${\sim}37\;MPa$ and ${\sim}85\;MPa$, respectively.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권5호
• /
• pp.297-304
• /
• 2015

A multilayer gaseous detector has been developed for fast dose-verification measurements of raster-scan-mode therapeutic beams in particle therapy. The detector, which was constructed with eight thin parallel-plate ionization chambers (PPICs) and polymethyl methacrylate (PMMA) absorber plates, is closely tissue-equivalent in a beam's eye view. The gas-electron signals, collected on the strips and pad arrays of each PPIC, were amplified and processed with a continuous charge.integration mode. The detector was tested with 190-MeV raster-scan-mode beams that were provided by the Proton Therapy Facility at Samsung Medical Center, Seoul, South Korea. The detector responses of the PPICs for a 190-MeV raster-scan-mode proton beam agreed well with the dose data, measured using a 2D ionization chamber array (Octavius model, PTW). Furthermore, in this study it was confirmed that the detector simultaneously tracked the doses induced at the PPICs by the fast-oscillating beam, with a scanning speed of 2 m s-1. Thus, it is anticipated that the present detector, composed of thin PPICs and operating in charge.integration mode, will allow medical scientists to perform reliable fast dose-verification measurements for typical dynamic mode therapeutic beams.

• 한국정밀공학회지
• /
• 제21권12호
• /
• pp.13-20
• /
• 2004

Manufacturing process for the microfluidic device can include such sequential steps as master fabrication, electroforming, and injection molding. The laser ablation using masks has been applied to the fabrication of channels in microfluidic devices. In this study, manufacturing of polymer master and mold insert for micro injection molding was investigated. Ablation of PET (polyethylene terephthalate) by the excimer laser radiation could be used successfully to make three dimensional master fur nickel mold insert. The mechanism fur ablative decomposition of PET with KrF excimer laser $({\lambda}: 248 nm, pulse duration: 5 ns)$ was explained by photochemical process, while ablation mechanism of PMMA (polymethyl methacrylate) is dominated by photothermal process, the .eaction between PC (polycarbonate) and KrF excimer laser beam generate too much su.face debris. Thus, PET was adopted in polymer master for nickel mold insert. Nickel electroforming using laser ablated PET master was preferable for replication method. Finally, it was shown that excimer laser ablation can substitute for X-ray lithography of LIGA process in microstructuring.

• 한국환경과학회지
• /
• 제17권11호
• /
• pp.1235-1241
• /
• 2008

Membrane separation is extensively used for water/wastewater treatment because of its efficiency separation processes. However, particles in the feed water can deposit and accumulate on the membrane surface to created cake layer. As a consequence, the selectivity of the membrane and flux through the membrane are decreased, which is called fouling/blocking phenomenon. In order to solve fouling problem, we developed a novel membrane named Carbon Whisker Membrane (CWM) which contains vapor-grown carbon fibers/whiskers on the surface of the membrane and a layer of carbon film coated on the ceramic substrate. We firstly employed polymethyl methacrylate (PMMA) as a testing material to investigate the fouling mechanism. The results suggested that Carbon Whiskers on the surface of the membrane can prevent the directly contact between the membrane body and particles so that the fouling/blocking could not occurred easily compared to the membrane without carbon whiskers. We also researched the relationship with the diameter, density of carbon whisker on the membrane surface and total flux of solutions. Finally, we will be able to control the diameter and density of carbon whiskers on the membrane and existence of carbon whiskers on the membrane, it is important factor, might be prevent fouling/blocking in the water treatment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1336_1337
• /
• 2009

본 논문에서는 유기 박막 트랜지스터의 전극을 잉크젯 프린팅과 스크린 프린팅 방법을 이용하여 유기 박막 트랜지스터를 제작하였다. 전극으로 PEDOT:PSS와 Ag 잉크를 사용하였고, 게이트 절연막으로 polymethyl methacrylate (PMMA)와 poly(4-vinylphenol) (PVP)를 사용하였다. 유기물 활성층으로 pentacene을 진공 증착하였다. 잉크젯 프린팅 방법을 이용하여 제작한 유기 박막 트랜지스터는 전계이동도 (${\mu}_{FET}$) $0.068\;cm^2$/Vs, 문턱전압 ($V_{th}$) -15 V, 전류 점멸비 ($I_{on}/I_{off}$ current ratio) >$10^4$의 전기적 특성을 보였고, 스크린 인쇄 방법을 이용하여 제작한 유기 박막 트랜지스터는 전계이동도 (${\mu}_{FET}$) $0.016\;cm^2$/Vs, 문턱전압 ($V_{th}$) 6 V, 전류 점멸비 ($I_{on}/I_{off}$ current ratio) >$10^4$의 전기적 특성을 보였다. 이를 통하여 프린팅 방법을 이용한 유기 박막 트랜지스터 단일 소자 및 유기 전자 회로 제작의 가능성을 확인 하였다.